How to set up mobile Internet on Android: instructions and life hacks. How to set up mobile Internet on Android: instructions and life hacks Data transfer does not turn on

For Beeline subscribers, unlimited mobile Internet in 4G networks is now available at high speed at the lowest price. The service works even when the main traffic on the tariff has ended and is available when traveling around Russia. It's convenient - use the Internet at maximum speed (up to 75 Mbps) everywhere for only 3 rubles a day. In 4G networks, the smartphone works up to 5 times faster - websites, movies, games and music now load faster. Need unlimited internet? Find out at the regular rate.

Description of service Unlimited in 4G

Service connection is free. The option is valid on tariffs with mobile Internet (ALL for 200, etc.) and devices that support 4G technology. Unlimited usage fee
- 3 rubles / day. The cost is fixed for prepaid and postpaid plans.

Internet at the rate is not consumed in the 4G network, and at the end of the limit, the speed on 4G will remain high (up to 75 Mbps)

LTE (or 4G) provides mobile Internet at high speed, which is comparable to wired Internet. Download your favorite music, movies and websites in seconds! The average internet speed will depend on several factors:

features of weather conditions;
coverage area;
smartphone characteristics;
number of subscribers in one network.

Connect unlimited Internet Beeline

To connect, you can go to your personal account or dial a number 06740909871 .
The option is relevant for sim cards with 4G support. If the subscriber uses an old-style SIM card, it can be replaced free of charge at the sales office within a few minutes while maintaining the number, balance and tariff plan.
The service is not provided when you are abroad and in some regions (Sakha river, Crimea and Sevastopol).

Attention: the service is designed for use in smartphones and tablets. When installing a SIM card with unlimited in a modem or router, the traffic package according to the tariff will be consumed, at the end of it the speed will be reduced.

How to disable unlimited 4G Beeline?

To disable the service, dial the binomier 06740909870 .

4G is a fourth-generation mobile connection that allows you to transfer data at a speed exceeding 100 Mbps for mobile devices. It's no surprise that more and more users want to know how to turn on 4G LTE on Android: previously, this speed was only available on computers.

Before trying to connect to 4G, you need to make sure that your mobile device supports this standard. If you have a modern smartphone, then no problems should arise, but it is advisable to check its specification on the manufacturer's website or in any major online hardware store.

The next step is to check the operator and coverage area. On the website of each mobile operator there is a network coverage map with the ability to switch between different standards. This map clearly shows that if 2G and 3G are available almost everywhere, then the 4G network is just beginning to spread throughout the country.

Not only the phone, but also the SIM card should support 4G. You can usually find out if a SIM card will work on the fourth generation network using the USSD command. For example, TELE2 subscribers need to dial *156# on the phone and press the call button. In response, an SMS with the result will be sent. If the SIM card does not support the LTE standard, you can replace it with another one in the communication salon. After installing a new SIM card in your phone, you will receive a message with settings for working on the 4G network.

If the device has a “clean” Android without shells from third-party developers, then to enable 4G, you must perform the following steps:

Changes are saved automatically, so you can exit settings and enjoy all the benefits of modern communication. To connect to the mobile Internet, lower the top menu on the home screen and activate data transfer.

Another option - in the same section where you chose the type of network, check the box next to the "Data transfer" item. In response to the warning that an open connection may result in data transfers and related charges, click OK. The costs in this situation are the mobile traffic included in the tariff by the operator.

On Samsung phones, the process for enabling 4G is slightly different due to the nature of the shell that is stretched over Android. To use the 4G network:

As a result, a Samsung smartphone will start working in a 4G network, provided that other requirements are met: the device supports the standard and is in the coverage area.

If the phone does not work on a 4G network, then the causes of the problem may be different:

The mobile device does not support 4G-LTE.
The operator does not provide services for access to the 4G network.
The phone is out of coverage.
Mobile Internet is not configured.

If it is difficult to deal with the first three reasons, then each user can check the status of the mobile Internet and, if necessary, configure it. The first step is to make sure mobile data is turned on.

LTE does not work in the device for several reasons. But the main reason for having such a problem is the lack of coverage by your network operator. In such cases, if it is at the level of program problems, it is possible to correct the situation yourself.

The following activities will be required:

1 Go to the iPhone 6s, 6 settings data and start maintaining LTE. The order of operations - settings - cellular - voice - data, where you need to select not 2G / 3G, but LTE . If a message is displayed - the certification process for functioning in the LTE network not passed by the data device, it is possible to turn it on.
2 The process of resetting the IOS update network settings and hard reset in iPhone 6. In the absence and reset of LTE (if there is a network), the setting will be carried out correctly.

But before contacting the technical center, you can try to solve this problem:

reset all cellular settings of the phone and reboot it (setting - basic - reset) and reset the network settings. As a result, the data will be saved while updating service information. But at the same time, these Wi-Fi passwords will be permanently deleted;
you will need to install the latest IOS system on the iPhone (settings - basic - system update);
reboot again - Reset, hold the power-on function, then “home” in simultaneous mode until the download progress indicator icon lights up and the apple symbol appears.

3 Carrying out maintenance LTE on iPhone 6 using component layers. When all of the above actions do not bring significant success, this means that the phone has problems with the device itself, namely:

the presence of various chip faults LTE or the circuit responsible for powering the microcircuit;
various problems with the modem are possible, as well as damage to the motherboard and its elements. Then it will require the use of special equipment and the participation of a qualified specialist.

These types of work would be best done by an experienced engineer in the field. To do this, the damaged phone should be transferred to a service center, where free diagnostics will be carried out and the necessary repairs will be performed.

Carrying out Wi-Fi, 3G/LTE settings

During operation, the device may stop catching Wi-Fi, LTE with high quality, and users have a question how to set up their phone. First you need to configure the mobile Internet on your phone. Of course, this service must be connected to your device by your mobile operator. If this service is not available, you need to connect. Next, turn on cellular data and turn on 3G / LTE (on an iPhone). At the top of the window on the monitor of your device, the symbol will light up - 3G / LTE or the letter E, which will indicate the possible absence of a 3G, LTE network signal, and will also signal that the mobile Internet is receiving a very slow signal - EDGE. There are times when it is necessary to adjust the APN settings by contacting your mobile operator. As a rule, they are filled in automatically. Here you can also configure MMS iPhone, iPad, if you need to use them. Then you need to do the following: setup - cellular communication - cellular communication for the transfer of information data. After all the activities carried out, the included iPhone should work without problems and receive all signals. If not, you will need to go to factory reset and restart your iPhone. Then you should check its filling in automatic mode, and if this does not happen, you will have to carry out this procedure yourself. But if this procedure does not help, then the IOS settings have nothing to do with it. Then you need to contact the technical support of your mobile operator.

The Wi-Fi settings on the iPhone are the following steps:

visit the IOS setting of your device and configure Wi-Fi;
the Wi-Fi function must be enabled, after which the most suitable network should be selected;
then you will need to enter the password on the Wi-Fi network.

If the router does not distribute an ip signal in automatic mode, you will need to register DNS (you must carefully study the instructions for servicing the phone). To do this, you need to press the button on the right side of the name and switch the tab - “static”, fill in according to the Wi-Fi network. If Wi-Fi configured correctly, but the network is not visible, which is why the connection does not occur, you need to visit the option - “forget this network”, where you will need to reconfigure the settings. The same steps will help when the question arises of how to enable 4g on the iPhone when using the phone.

Finally, domestic operators began to expand and improve the quality of LTE coverage in the periphery. The data transfer rate relative to the good old 3G in this case is of course phenomenal. It remains to enable support for this wireless standard in your iPhone or iPad. About why this is necessary, how to do it and on which iPhone models it is generally possible, read this material.

What gives LTE (4G)? Advantages and disadvantages

Of course, the main advantage of LTE (4G) is the data transfer speed. Web pages and other multimedia content will load much faster, and when using your smartphone in modem mode, you will experience a higher level of comfort when working on a PC. But do not forget that the use of LTE (4G) networks leads to a faster discharge of the device. This is evidenced even by iOS itself when switching in the settings.

Which iPhones support LTE (4G) and what is the data rate?

Not every iPhone has an LTE module on board. It first appeared on the iPhone 5. But another caveat is that each new generation of iPhone uses a more advanced LTE module that can provide more bandwidth. The maximum data transfer rate depending on the device model is as follows:

iPhone 5, 5c, 5s - up to 100 Mbps.
iPhone SE, 6, 6 Plus - up to 150 Mbps.
iPhone 6s, 6s Plus - up to 300 Mbps.
iPhone 7, 7 Plus - up to 450 Mbps.
iPhone 8, 8 Plus, iPhone X, iPhone XR - up to 600 Mbps.
iPhone XS, XS Max - up to 1 Gbps

Of course, these figures can be significantly lower depending on the channel width provided by the operator, the distance and workload of the base stations.

How to enable LTE (4G) on iPhone and iPad

If the cellular data network is already set up, then enabling LTE (4G) is easy:

1 . Open Settings → Cellular → Data options → Voice and data.

2 . Check the box next to LTE. In the pop-up message, click " Enable LTE».

You can check the speed of your Internet connection using the free Speedtest utility.

In this article, we will begin to thoroughly analyze iOS 10 settings. Meet the first part of the updated settings guide. In it we will talk about the connection settings.

The article is intended for beginners, but experienced users may find something useful for themselves.

Part 1: Communication settings (Wi-Fi, 3G, LTE, Bluetooth) (current article)
Part 2: Notifications, Control Center, Do Not Disturb
Part 3. Basic settings
Part 4: Wallpaper, screen and brightness, privacy and more

Communication setup on iPad

airplane mode

A useful option if you have to fly on an airplane. Disables Wi-Fi, Bluetooth, 3G, LTE, VPN, GPS modules with a single switch. I turn on airplane mode if I want to extend my iPad's battery life a little (relevant on long trips).

When this option is enabled, an airplane icon will appear in the upper left corner of the screen:

Enable/disable the Wi-Fi module. Connecting to Wi-Fi networks. The first time you connect to the network, you may be asked for a password. Get it from your network administrator. On your home network, you are your own administrator: get a password in the router settings.

After connecting for the first time, iPad will connect to the familiar Wi-Fi network automatically. If there are several familiar networks nearby, then it will connect to the network to which it was last connected.

Additional Wi-Fi settings allow you to manually specify the ip address (required if the router is not configured to automatically issue ip or you want to specify a specific ip), subnet mask, DNS, etc.

There are also proxy server settings. Proxy servers are intermediary computers for a subscriber to access the Internet. Most often, these settings are used to bypass geo-referencing to a region or blocking by ip. Typically, a normal user does not need this setting.

Forget this network– allows you to reset the saved Wi-Fi network password. Useful for network glitches, changing Wi-Fi settings, and connection problems.

Renew lease– the option is needed for the iPad to request a new free ip address on the router. It is used as one of the remedies for problems with connecting to Wi-Fi.

Turn on/off the Bluetooth module. After switching on, devices that are available for connection are searched. For example, the Apple Wireless Keyboard or MacBook.

If you poke on the device, then for the first Bluetooth connection you need to create a pair. On the same MacBook, you just need to confirm the creation of a pair, you need to drive in a special code on the keyboard.

In additional options (see screenshot below) there is an option to “Forget device” or “Disable device”. If you “forget”, then even with Bluetooth turned on, the device will not automatically connect (you will have to pair it again), and if you just “disconnect”, then at this particular moment the Bluetooth connection will be interrupted.

Attention! The presence of a Bluetooth module in an iPhone or iPad does not mean that you can connect the iDevice to a regular cell phone or Android smartphone and transfer files. iOS is a closed system and to get such functionality you need a jailbreak and the corresponding utilities from Cydia.

Cellular Data

This item is only available on iPad models with 3G or 4G (LTE) and iPhone. If you insert a SIM card and turn on the item Cellular Data(in the Cellular Data section), then mobile Internet will appear on the iPad (of course, if your tariff allows it).

AT Cellular data options there are various cellular network settings.

Enable LTE- if you turn off this item, then even if the operator supports LTE, you will be switched to a slower 3G. LTE even more "eats" the battery charge.

data roaming– enable this option when you are abroad or in a region with roaming to use GPRS, EDGE, 3G, LTE. But keep in mind that data roaming abroad costs inappropriately large amounts of money. I recommend keeping this option disabled, and using it only in the most extreme cases. It is easier to buy a local SIM card abroad.

(Access Point Name) - the correct operation and billing of services in the cellular network depends on the correct APN settings.

The APN settings of the main operators can be found. Generally, manual APN configuration is not required.

Modem Mode- an option that allows you to turn your iPad (or iPhone) into a hotspot. That is, your iPad will distribute cellular traffic over Wi-Fi to other devices. When turned on, there will be a choice: to distribute the Internet via USB, Wi-Fi or Bluetooth. .

Please note that the option is duplicated in the main settings window.

SIM PIN- here is the option to disable or change the PIN code for the SIM card. The PIN code is necessary to protect the SIM card in case of loss. If the SIM-PIN option is enabled, then each time the device is rebooted, the PIN code of the card will be requested.

Cellular tariff statistics– this option allows you to monitor the traffic usage in the cellular network. It is convenient if the user does not have an unlimited tariff. For example, my tariff allows you to use 2 gigabytes per month. If you reset monthly statistics (button Reset statistics at the bottom), you can monitor traffic so as not to overdo it.

Cellular data for– the option helps to track the amount of data used by a particular program. You can also turn off applications that you do not want to allow access to the Internet on a cellular network. I recommend doing this.

At the very bottom of this list is revealing statistics on the use of the cellular network by system services.

What are these services? Let's look at the screenshot:

Of the 4 gigabytes in the last 2 months, 881 megabytes were in Hotspot mode. Messages took 25.4 megabytes, push notifications another 42.6 megabytes. The statistics are interesting in that you can identify the most “eating” services and disable some of them, thereby saving a little traffic.

Well, the option that first appeared in iOS 9.3. – . If enabled, your iPhone/iPad will automatically switch to cellular when the Wi-Fi signal is poor. From experience - the option is very useful and works adequately. For example, when 5 people were sitting on a 2 megabit channel, my iPhone turned on LTE internet by itself when someone clogged the channel. And switched back to Wi-Fi as soon as the channel became freer.

VPN and Operator

VPN– the option enables/disables VPN. Appears when one or more VPN profiles are installed on iOS.

VPN– virtual private network. A technology that allows one or more network connections to be provided over another network. The technology allows you to bypass various blocking and hide in the network.

The VPN profiles themselves are not here, but here: Settings->General->VPN.

And finally, let's look at the menu item in the settings Operator. This item appears only when a SIM card is inserted into the iPhone or iPad.

The default operator is Automatic. But if the item is disabled, then you can select any operator from those working on site. The option comes in handy abroad if the auto-selection of the operator through which roaming will be carried out does not suit you.

In your native region, it’s better not to go here and leave the automatic choice.

additional information

iOS has the ability to quickly turn on / off airplane mode, Wi-Fi, Bluetooth. The buttons you need are in the Control Center.

The Control Center is convenient in that it speeds up access to the most necessary communication settings. Unfortunately, Apple never thought to include a cellular data toggle, so I use the Airplane Mode on/off button to quickly reconnect cellular data. This is useful if the iPhone loses 3G/LTE (it happens in places with unstable signal).

The AirDrop function switch is also located here. AirDrop is a technology designed to transfer data (photos, contacts, etc.) between Apple devices. The technology uses Wi-Fi and Bluetooth, so they must be turned on.

To be continued…

If you have questions about Wi-Fi settings, cellular network - write comments.
If there are additions to the article or tips - write comments.

It might be useful to read: