The letter r appeared on the display of the phone. What does the letter r mean on the phone. What does the letter E stand for on a Nokia2310c phone

.
In modern smartphones, in the top line of the screen (called the Status Bar), you can always find the signal strength icon and the battery level icon. Letters 2 may appear in the same line G, 3G, H, H+, 4G, sometimes LTE.

For a detailed description of the icons in the Smartphone Status Bar, see the article “What does the icon (icon) at the top of the screen panel of a HUAWEI (honor) smartphone mean?” . To go to the description of icons and icons, press .

And what do they mean? The answer is really simple - these icons show which data transfer technology is currently being used to connect your smartphone to the Internet.

The Internet is firmly entrenched in the lives of most cellular users. Now more and more services are provided to owners of mobile devices via the Internet. In this regard, the speed and quality of data transmission is already essential and therefore, engineers of cellular operators are constantly developing new standards, and LTE one of them. It provides highly efficient high-speed data transmission. This standard represents an intermediate option in the transition from third to fourth generation networks.

The history of mobile data transmission standards today is as follows:

— 2G- 2000 standard. The information transfer rate does not exceed 20 kbps. Here you can transfer only image, text files, voice message. Today it is the most widespread network and only obsolete mobile devices can use it.

- 3G- 2010 standard. The data transfer rate does not exceed 3 megabits. It already gives more opportunities: video communication, online movies, free surfing on the Internet.

- 4G (LTE, LTE-A). (4G- a phrase from English. fourth generation- fourth generation LTE- from English. Long Term Evolution– “long-term evolution”). These are promising technologies that allow data transmission at speeds exceeding 100 Mbps. It provides the same features as 3G, but at a higher quality level.

Table of icons (icons) of the 4G (LTE) data transfer standard in the Phone Status Bar:

Icon (icon)	Description of the icon (icon)
	Connecting to a 4G network
	Connecting to an LTE network
	Connecting to an LTE+ network
	VoLTE (HD Voice) enabled: Enhanced voice quality over LTE networks enabled

The LTE standard is an intermediate step in the transition from 3G to 4G.
The new LTE protocol works on the basis of already existing third-generation (3G) networks, which greatly facilitated the task of introducing new 4G technology. It is carried out by optimizing the equipment without fundamentally changing it.
Despite the fact that LTE does not reach the technical characteristics of the fourth generation of communication, but even this allowed it to provide an increase in the capabilities of existing 3G networks by about 5 times.

According to world analysts, already in 2018 more than 60% of mobile traffic in the world will be LTE, and by 2020 LTE should completely replace the GSM standard. The transition to LTE will entail the purchase of modern models of mobile devices, since old models of smartphones and tablets with a slot for 3G SIM cards can no longer be used to work in 4G networks.

LTE in a modern smartphone allows you to provide:

- high data transfer rate. This speed used to be only on computers.
— view video in high quality without delay;
— use video communication for calls and for video conferences;
- use as a router for distributing WiFi;
- communication stability even at high speeds of movement of the communication object;
- significantly improve the quality of the transmitted sound.

How to connect to LTE on a smartphone:

1. First you need to make sure that the mobile device supports this standard. To do this, you need to check the characteristics of the smartphone on the manufacturer's website or in any major online hardware store.
You need to pay attention to the frequency range that is available to the phone. It often happens that the specified frequency range of the LTE standard does not meet Russian standards. Let us clarify that 3 FDD frequency bands are supported in Russian 4G networks: B20 (800 MHz), B3 (1800 MHz) and B7 (2600 MHz). Categories of LTE Cat.4 and Cat.6 devices are optimal for Russia.

2. Find out from the telecom operator the coverage of the 4G standard (LTE, LTE-A).

3. Find out if the SIM card installed on the phone supports the LTE standard. If not, it must be replaced with another one in the communication salon.

How to check the network connection settings4G standard (LTE, LTE-A) on a HUAWEI (honor) smartphone:

1. Launch the application "Settings" smartphone.

Screen 1 of the smartphone - enter the Settings of the smartphone. Screen 2 smartphone - select the section "<Беспроводная сеть»

3. In the "Wireless networks" section, select "Mobile network".

4. In the "Mobile network" section, select "Network type".

Screen 3 smartphone - select the section "<Мобильная сеть». Экран 4 смартфона - выбираем раздел «<Тип сети»

In the "Preferred network mode" window, you should have the position activated "Auto 4G/3 G/2 G» .

Screen 5 of the smartphone - the "Preferred network mode" window in which the "Auto 4G / 3G / 2G" position is activated

If the smartphone supports LTE, then to connect it, it is enough to have a properly configured access point. As soon as the phone is in the 4G coverage area, it will automatically switch to a high-speed network.

"H" on the phone - what is it? This question was asked by almost all users of mobile devices. Especially often, various doubts about incomprehensible icons arise among inexperienced users, however, it is not surprising, because it is not so easy to figure it out right away. So, "H" on the phone - what is it?

One of the communication standards

Users of mobile devices often see clear and not so clear icons at the top of the screen. These designations tell us how much charge the battery has left, whether there are new messages, how well the network is catching at the current moment.

And the letter "H" on the phone - what is it? Such an icon makes it clear to the user that he is in the high-speed Internet coverage area, which is related to 3G technology.

What does it mean

Your mobile device is currently using one of the fast connection and networking methods. These are quite high speeds, for example, an excellent solution for watching a small video on the Internet or when listening to music. At the moment, it is one of the most popular mobile Internet broadcasting ranges.

Other designations

We hope you figured out the "H" icon on the phone - what it is. Now it will be much easier for you to understand what is behind the following designations: "E", "3G", "LTE", "H +". First of all, they signal the speed at which your device operates, and then we will talk about them in more detail:

E- one of the slowest standards, such a connection may mean remoteness from base stations or features of your operator's tariff. This is a very slow Internet, it is enough to see the weather with a delay, and then at best.
3G. This is more modern technology. It allows you to easily communicate on social networks and listen to music with a small load, but about seven years ago this was a real breakthrough in the field of mobile Internet.
H(sometimes referred to as 3G +), the same icon at the top of the screen that worries so many. It means that a fairly good Internet connection is provided, at high speeds. It is entirely possible to watch videos or play online games on mobile devices.
LTE (4G). It is the latest communication standard for mobile Internet access. The speed of such smartphones is comparable to connecting to a regular, wired Internet. You can safely download sufficiently capacious files, watch movies, use social networks. However, in Russia, and throughout the rest of the world, this technology is relatively young, so the coverage area is not as large as that of previous standards, which means that the network can sometimes disappear.

"H" on the phone: what is it, how to turn it off

It is also possible that you simply do not need the Internet on a mobile device. In this case, it is better to contact the operator and choose a more favorable tariff so that it does not stand idle.

If you need to temporarily disable the Network, then just go to the settings, depending on your smartphone. Usually this is the so-called curtain - when you swipe your finger down the screen and select the "mobile data" or "connections" column. Next, you just need to uncheck the box - and you temporarily turned off the Internet on your device.

In order to turn on the Network again, you should do the same operations in reverse order.

But for the Internet to work, and the icon to disappear, most likely, more complex technical manipulations with the installation of additional software will be required, which is quite long and pointless.

Results

So, we figured it out and answered the question: "H" on the phone - what is it. As you can see, such an icon is a completely harmless designation of the range in which the Internet operates on your smartphone.

If you need to remove another of the above icons (which will also lead to a disconnection from the Internet, then you should do the same operations through the settings.

Lumiya 820 which means where the connection highlights write the letter H and sometimes near H + .. WHAT IS IT AND HOW TO REMOVE IT WAS NOT BEFORE

Mechanical messiah

People who do not often use the Internet on their phones are wondering what the mysterious little icons 3G, 3.5G 3G+, H, H+, L, Lte mean at the top of the phone or smartphone screen.
Despite the fact that these symbols began to appear a long time ago, they, like new technologies, come to the outback of Russia slowly and with a great delay :) giving rise to questions from not very advanced questions.
To put it simply and briefly, this is the type of phone connection to the network at a given time.
The first phones and networks did not know how to connect to the Internet at high speed, they only used them for conversations and did not see incomprehensible icons :)
Now there are a lot of them:
G - your phone is connected to the network (data transfer is enabled) using GPRS technology, one of the first, to date, slow ways to connect to the Internet.
E - network connection via EDGE, about 3 times faster than G.
3G - congratulations, your phone is on the 3G network. Depending on the phone model, the icon may appear during data transfer, or it may constantly signal that the phone is connected to the network in this mode. If both interlocutors have good enough phones, with high-quality speakers, and both work in 3G, you can hear with the naked ear that the interlocutor's voice sounds better and more natural. This is true if the network is not at the launch stage and the phone supports it normally. Otherwise, the quality and stability of the call may not be up to par. The data transfer rate in this mode can reach 384 Kbps, which is already quite tolerable for browsing websites or listening to online radio.
As a rule, the phone shows which 3G mode it is working in.
3G on mobile screen
3G icon on mobile phone screen
3.5G, 3G+, H - symbolize the connection. by HSDPA. Some devices display the 3.5G icon and H lights up directly when sending or receiving data over the network. Theoretically, speeds up to 5.7 Mbps are possible. It is already possible to download or watch the movie. In practice, the speed is less. For comparison, watching a video in excellent quality from YouTube is enough for 1 Mbps.
H on mobile phone screen
H icon on mobile phone screen
H+ is an extension of the previous standard. Similarly, it may not burn all the time, but only when connected and allows you to reach the speed of downloading information up to 42.2 MBits / s and transmission from the subscriber to the network up to 5.76 MBits / s.
LTE, L, 4G - 173 Mbps for receiving information from the Internet and 58 Mbps for downloading to the network.

The G or E icon on the phone screen in the upper left corner of the screen what do they mean?

G always meant GPRS. Lighted up on phones when there was still 3G and there was no project ... - 3 years ago

Usually such a letter is located next to the reception level indicator. The letter "G" means that the phone is connected to a 3G network, which provides data transfer at an average speed of about 4 MBsec.

The letter "E" indicates that the phone is currently switched to the EDGE data transfer standard, in which the data transfer rate is limited to 384 kBs, which is approximately 10 times slower than in the 3G standard.

For the user, this indicates that the letter "G" means good reception and a good zone, you can use Skype, watch videos from the Internet, download music.

When the letter is "E", it means the phone is not in the best reception area, or the load on the station has increased, you can't contact such a letter via Skype, you can't watch the video, you can't download music, but just climbing the sites is quite enough.

Consumer

G-GPRS ,E-EDGE .High speed access. to the Internet. When there is access to the network and the settings of the phone itself allow you to work with this data. The second method is faster. It all depends on the capabilities of the operator, your tariff and the phone itself.

buzzing bee

The G and E icons in the upper corner of the phone screen mean that the Internet is connected. Such icons are on the screens of modern phones, smartphones.

The icons indicate the data rate. The larger the letter, the higher the speed.

G means the slowest speed, denoted by GPRS.

E speed is twice as fast, denoted by Edge GPRS

There may also be 3G icons (third generation speed, low-resolution video can be viewed), 3G + and H speed is even higher, H + is even higher, and LTE is the fastest 4G speed.

Moreljuba

The G or E icon on the phone screen in the upper left corner of the screen means Internet access networks: G-GPRS or E-EDGE. When these icons are lit, it means that the phone can access the Internet through a specific network. It is worth noting that E-GPRS will provide you with more speed.

If the icon is highlighted, then the phone is connected to the Internet or simply received a signal from a certain network, since you say that you have a simple phone.

Alexgroovy

The G and E icons in the upper corner of the screen inform you that your device is connected to the Internet.

The letter G corresponds to a GPRS connection, which is currently very slow.

E or EDGE is a modern digital technology for exchanging data using wireless communication. The speed is many times higher than that of GPRS.

Smiledimasik

These letters G and E mean that you are connected to the Internet or simply activated. Even if you have a very simple phone, it can show this. The letter G shows a weaker Internet connection, but E is already faster. Also, you may meet 3G and 4G, this is even faster Internet.

USSR

Now, at the beginning of 2017, such an icon ( G PRS or E DGE) means that you have a very old mobile phone with very slow internet, and of course, an unusable browser. Using such an Internet is one torment now, when even 3G seems incredibly slow.

Help to

In addition to the letters G and E, other characters can be shown at the top of the screen: 3G, H, H +.

The G and E symbols indicate standards for connecting to the Net. G is the lowest GSM protocol standard. E is Edge and it's faster internet. Well, 3G is an even more powerful connection.

Marat 111

This means which Internet is connected with the letter G-phone indicates that GPRS is connected, and with the letter E-EDGE, in addition to these letters, 3G, 4G, H, H + can also light up. If you have G or E, then the Internet is very slow and it takes a long time for the page to load.

Stalonevich

This means that your phone is connected to the Internet and data is being transferred. In more detail, G stands for GPRS and E stands for EDGE. Please note that mobile data charges apply for these networks.

It doesn’t matter if you use an Android, iOS or Windows Phone smartphone, when you activate mobile Internet, you will see the same thing in the upper right corner - several bars indicating the strength of your mobile network signal, as well as a mystical letter. Sometimes it's E, sometimes it's 3G, and sometimes it's H or H+.

However, this is not just an alphabet soup. Each term indicates what kind of data network protocol you are connected to, with different protocols giving different Internet connection speeds.

In this short article, we will share everything we know about each of the networks: what they are called, how fast they are, and what you can do with them. So, let's begin!

LTE - Long Term Evolution (4G)

At the moment, LTE provides the fastest Internet speed, in theory - up to 100 Mb / s. LTE is faster than most home networks, and this allows users to download even large files almost instantly, watch HD quality videos and listen to music online, and download any website on the fly.

LTE is quite often associated with the term 4G. However, in reality, the 4G standard is still unattainable, because its speed is 1 Gb / s, which is ten times faster than modern LTE networks. Unfortunately, this term has gained some currency, however, until true 4G networks have appeared, you can use these two terms as synonyms.

In San Francisco, LTE appeared in early 2012. Advertising 4G LTE mobile operator AT&T on a cable car. A photo:

H+ (HSDPA Plus)

HSDPA Plus is the fastest network currently supported in Ukraine and theoretically gives speeds of around 21-42 Mbps. On most versions of Android smartphones, you can see the letter "H+", but on Android 4.4 it just shows "H".

H+ makes it easy to watch HD video on the Internet and is comparable to the speed of home broadband networks.

The letter "H+" when connecting to the "Kyivstar Smartphone Plus" tariff. A photo:

H (HSDPA - High Speed Downlink Packet Access)

HSDPA is a protocol that is based on UMTS (3G). But this is a slower version of HSDPA Plus, giving a speed of about 7.2 Mb / s. This is somewhere around the minimum required speed for comfortable viewing of video content in HD quality, comfortable surfing the Internet and listening to music on the network is also possible.

3G (3rd Generation or UMTS)

3G digital networks initially served to support video calls with download speeds of about 2 Mb / s (in the very beginning, speeds of about 384 Kb / s were supported). This was the stage of quite a decent Internet, when most users had smartphones with advanced features that required a good connection (e-mail, skype, etc.).

E - EDGE (Enhanced Data Rates for GSM Evolution)

EDGE is sometimes known as 2.75G and is about 384Kb/s. EDGE was designed as a cheap way for mobile operators to upgrade their 2G networks and get closer to 3G without having to invest in new infrastructure. For a long time mobile operators in Ukraine used this technology.

G - GPRS (General Packet Radio Service)

GPRS, or "butt cutter" as it was called in the early 2000s, is a slightly faster version of the early GSM data transfer standard. In this sense, it is sometimes called 2.5G - an improved version of 2G. Speed - about 115Kb / s, which was enough to download a simple web page or some basic textual information, such as exchange rates.

GPRS is the first service that gave a constant mobile Internet connection and the ability to quickly receive information from the network.

Ukraine

Until the spring of 2015, in Ukraine, the monopoly provided the UMTS service by one operator owning the necessary frequencies - a subsidiary of Ukrtelecom - Trimob (formerly Utel). All other mobile operators and their users were content with EDGE.

In the spring of 2015, a tender was held for the sale of licenses for UMTS / HSDPA and the commission sold three frequencies to Astelit (Life), MTS-Ukraine and Kyivstar. Moreover, Astelit (Life), which was recently sold to the Turkish operator Turkcell, bought the most interesting frequencies. The second lot was taken by MTS-Ukraine, and Kyivstar received what was left at the starting price.

SymbolsE,G.2G.3G.4g,h,H+,GPRS,edge,UMTS,LTE in the status bar of a mobile phone, smartphone or tablet indicates the type of mobile connection that is possible and available at the moment. The most common charactersg,E,3g,h,H+, 4g,LTE.

Mobile telephony is a type of mobile radio communication between subscribers. When organizing communication, cable lines are not used, and a radio channel is used to communicate with the subscriber's device.

What does the G symbol mean in the status bar

The G symbol in the status bar may indicate that the mobile device is connected to a network and data can be transferred. The symbol G is used to denote a GPRS network.

What does the symbol E in the status bar mean

An E in the status bar usually means an EDGE connection. In this case, the data transfer rate will be higher than in conventional GPRS networks. Sites load slowly, however, pictures load without any problems and it is quite possible to use e-mail.

Sim What does the symbol ox 3G in the status bar mean

The 3G (3 Generation) symbol in the status bar indicates operation on 3G networks. The connection quality is very high, and the data transfer speed allows you to quite confidently visit Internet sites, listen to music on-line or play on-line games.

What do the symbols 3.5G, 3G+ and H mean in the status bar

The symbols 3.5G, 3G+ and H are more of a marketing value, although devices with such markings allow a fairly high speed of communication with the Internet. Bandwidth allows you to receive high quality streaming video. This mode allows you to download bulky files with video content in a reasonable time.

What does the H+ symbol mean in the status bar

The H+ symbol in the status bar may indicate an improved mode of operation compared to the modes indicated by the 3.5G, 3G+ and H symbols. This mode provides a high download speed from the Internet and a fairly fast upload speed to the Web. In some models of mobile devices, the H+ symbol appears only during data exchange.

What do the symbols for LTE, L, 4G, 4G LTE mean in the status bar

The symbols LTE, L, 4G, 4G LTE in the status bar indicate the mode of operation in the latest valid version, which allows for very intensive data exchange. The need to introduce such a regime is primarily due to the fact that more and more users are constantly online, receiving information from social networks, various data from corporate websites, exchanging emails, sending and receiving voice and video messages.

Abbreviation GPRS

The abbreviation GPRS stands for General Packet Radio Service. Actually GPRS enables the user of GSM mobile networks to exchange data. This data exchange is possible not only within the GSM network, but also makes it possible to exchange data with external networks, such as the Internet.

It is useful to know that charging in GPRS is related to the amount of information received/transmitted.

EDGE abbreviation

The abbreviation EDGE (Enhanced Data rates for GSM Evolution) denotes a further modification of GPRS. The modification itself touched on the method of encoding information, which made it possible to transmit its increased volume.

UMTS abbreviation

The abbreviation UMTS (English Universal Mobile Telecommunication System) stands for the generation of cellular communications of the third generation 3G.

Abbreviation 4G LTE

The abbreviation 4G LTE (English 4G Long-Term Evolution) denotes the further development of GSM-EDGE and UMTS-HSPA technologies. The advantage of 4G LTE is the increase in the bandwidth of communication channels and the exchange rate due to updating the radio interface and modifying the network core.

For more information about the possibilities of mobile communication G, E, 3G, H, H+, 4G, 4G LTE, see Data exchange rates with the Internet of mobile devices G, E, 3G, H, H+, 4G LTE

See you on the web!