Scope of a cultivator Texas. Scope of cultivator texas Cost of pre-sale preparation

Delivery terms

Moscow and Moscow region:

Delivery is carried out the next day after the order of the goods, but there may be exceptions
- delivery time: Mon.-Fri. from 11:00 to 22:00
- delivery of goods is paid directly to the courier and only in rubles

Delivery cost in Moscow and the Moscow region:

Delivery in Moscow of orders worth less than 30,000 rubles. - 650 rubles, orders over 30,000 rubles. - free

Delivery in the Moscow region: delivery in Moscow + 40 rubles. for 1 km. from MKAD

Goods lifting:

Delivery of heavy and bulky goods is made to the entrance
- delivery of goods not overall and weighing up to 20 kg. produced to the apartment
- it is possible to lift the goods, provided that it can be done by one person:

When lifting goods without an elevator - 100 rubles per floor, but not less than 300 rubles.
when taking the elevator - 300 rubles

Pickup:

There is no self pickup.

Delivery to regions:

Carried out by transport companies
- payment for delivery to the transport company is carried out according to the tariff of Moscow
- the services of transport companies are paid by the recipient upon receipt of the goods

You can calculate the approximate cost of delivery using the calculation program on the websites of transport companies:
Business lines http://www.dellin.ru
Railway Expedition http://www.jde.ru
Autotrading http://www.autotrading.ru
DPD http://www.dpd.ru

Terms of payment

The minimum order amount is 1000 rubles.
The minimum order amount by bank transfer is 5000 rubles.

Cash payment:
You can pay for the order in cash upon delivery to the courier.
You can pay for the order in cash at pickup.
Payment is accepted only in rubles.

Payment by bank cards:
(temporarily not accepted) pay electronically
You can pay for the order upon delivery by credit card.
This service is possible only upon delivery by courier in Moscow and the Moscow region or upon self-delivery.
If you are in another city, then in order to pay with a bank card, you need to select "electronic payment methods"

Rules for payment for goods from the regions:
There are two ways to pay for goods upon delivery to other regions:
1) According to the receipt in the bank
2) By electronic means payment

Bank check payment:
After placing an order, we will send you a receipt by e-mail.
The name of the payment must indicate the product you have chosen.
After the money is credited to the account, we deliver the goods to transport company by notifying you in advance.

Electronic payment methods(without leaving home):
- Bank cards (Visa, MasterCard)

Payment by bank transfer:
Legal entities:

To pay for goods by bank transfer from our online store, we will send you an invoice with the payment method agreed with you.
The invoice and the goods reserve are valid for three banking days. If during this time you do not transfer funds to pay the invoice, it becomes invalid and you will need to receive a new invoice for payment. If you need to extend the reservation, then you need to contact us in any convenient way. The goods are released after the funds are credited to our current account. To receive the goods, you must provide the original power of attorney from the paying organization indicating the received material assets or certify our copy with a consignment note with the seal of the paying organization.

Please confirm the payment of your order by sending a copy of the payment order.

** Due to the unstable level of the dollar and euro, the prices on the site may not be relevant.
Please contact the managers to clarify the exact information on prices, availability and reserves.
Hope for understanding!

If you are a client of the Garden Mechanisms online store, then you can use the service of a qualified pre-sale preparation of equipment. It is implemented on the basis of its own Service Center, which has authorization and certificates from the world's leading manufacturers.

How the equipment starts in operating mode depends on its further operation. In our case experienced employee The service center will make a trial run at idle. Especially for our customers, we will adjust and set up the equipment in such a way that it is ready for the upcoming loads. After that, if the results of the check do not cause claims, the instrument is sent to its rightful owner.

What are we doing?

checking the complete set (when opening, it is checked whether everything is in place)
assembly finished product(if necessary)
adjustment check
oil filling equipment
lubrication control in gearboxes and gearboxes
product launch

Everything for the Client

As soon as the tool is unpacked for pre-sale preparation, a professional works with it. Therefore, we can guarantee the quality of our services.
You get equipment 100% ready for work.
Competently executed commissioning is excellent results in the future.

Important

When making a purchase of a gas tool, the managers of the Garden Mechanisms online store offer everyone the service of passing pre-sales preparation. You can opt out of this service if you wish.

In what cases do they refuse pre-sale preparation?

If you wish, you can receive the product in its original packaging and open / assemble it yourself.
If the product is planned as a gift and traces of equipment operation are undesirable (fuel residues in the tank, filled oil, opened packaging).
In the event that its further transportation is expected, which is impossible with the assembled product. For example, it is supposed to send the goods through a transport company or by mail, or further transportation is planned by transport, where the assembled product does not fit in size.

Pre-sale preparation cost

The price includes: unpacking and checking the complete set (when opening, it is checked whether everything is in place), assembly of the finished product (if necessary), checking adjustments, refueling equipment with oil, refueling, lubrication control in gearboxes and gearboxes, starting the product. Oils and lubricants are not included in the cost of assembling the equipment.

Gasoline is poured minimum amount. The approximate cost of assembly of the product can be found in the table. The cost depends on the complexity of the assembly and the time spent on it. Specify the conditions, terms and the exact amount of assembly / pre-sale preparation with the manager when placing an order. Free pre-sales training applies only to all products of brands and. The products of these manufacturers are marked with a special “Free presale” badge.

Installation and assembly of additional attachments for tractors and walk-behind tractors is paid separately and the cost depends on the type of equipment and the complexity of the work. Specify terms and cost of this service at managers.

Chainsaw, Trimmer (with two-stroke engine)	1000 rub.
lawnmower, motodrill, trimmer (with four-stroke engine)	1500 rub.
garden tractor/rider	3000 rub.
snow blower, Cultivator, Motoblock	1500 rub.
big tractor	5000 rub.

The Russian market of horticultural equipment is being mastered by foreign models. Cultivators Texas represent the Danish company of the same name. Since 1960, the manufacturer has been developing a narrow direction and has succeeded in this. Texas gardening equipment is made with special care for the farmer. Cultivators and walk-behind tractors of the company work reliably.

Service maintenance of equipment by the company

Repair of the Texas cultivator and service maintenance of equipment are provided by specialized centers. The operating instructions list the addresses of repair shops. The warranty on the tool is valid for 3 years, so first of all you need to determine the location of the repair center and the possibility of service. This applies to the warranty part of the tool. You can fill in grease, replace the belt, not a Texas cultivator, in any workshop or on your own.

Breakdowns of heavy-duty equipment are classified as:

engine breakdown;
failure of automation;
failure of mechanical components.

It is these problems that will require contacting the service center.

When buying a Texas cultivator, you need to stock up on branded lubricant for the gearbox and drive belts at the same time. It is not difficult to find the specification of nodes in the attached manual. The numbers and letters of the marking indicate the size and profile of the belt. The designation TEXAS A 41 1/2 13X1050Li is read, the V-profile belt is 8 mm high and the wide part is 13 mm wide, reinforced with cord thread, length 1050 mm. The marking is applied on the wide part of the ring, indicated in the Texas cultivator's instructions. The manual has been translated into machine language, but the technical terms are clear.

In addition, in the instructions it is necessary to learn the rules for preparing the cultivator for work, the frequency of replacement engine oil. Please note that the first crankcase oil change is carried out after 5 hours of operation. You need to use the recommended fuel in the work, it differs in different models.

Spare parts for a Texas cultivator are purchased at service centers. They will be delivered even if the model has been in operation for a long time and is out of production.

Characteristics of Texas cultivators

Manufacturers have provided for the release of equipment for various areas and depths of processing. Some models do a good job with garden beds, while others can lift fallow areas with heavy soil. At the same time, the range of mounted implements used increases the sector of equipment use.

If the cultivator digs in loose soil, slow down the gas, put the wheels in the middle position, adjust the coulter.

Design features of Texas motor cultivators:

the control panel of the machine is placed on the steering wheel of a special design with a comfortable grip;
lightweight rear console improved centering and reduced weight;
the exclusive frame made it possible to lower the center of gravity, to facilitate the control of the device;
the engine is placed above the cutters, the unit has gained stability;
there is a front bumper to protect the motor and transport wheels.

Design changes to the Texas cultivator have added manufacturability to it. So, all devices have a reverse, no effort is required to pull out a dug-in car. Powerful machines process a wide strip of dense earth to a depth of 30 cm. All machines have a chain drive and are equipped with reliable four-stroke engines. The disadvantage is increased noise during operation and burying the nose in soft soil.

It is impossible to use a cultivator, cultivating glades after cutting down. On the roots, the sabers will definitely break! The full load on the cutter can be given after running.

Varieties of models of cultivators

A number of Texas equipment is subdivided according to the power of the units and the type of work performed. The Hobby series, as the name implies, is used in small areas with light soil. Light cultivators are indispensable for preparing beds for root crops, decorating flower beds and digging greenhouse land.

Cultivator Texas Hobby 300 small and daring. He will climb into any corner of the garden, process the trunk circle, cut the beds. Power equipment - American engine Briggs & Stratton, four-stroke, with a combustion chamber of 148 cm 3, 2.6 kW. The design uses a chain reducer. The unit processes 38 cm to a depth of 18 cm. The device weighs 28 kg and costs 21 thousand rubles.

The Hobby Series Texas 500 cultivator, with a proprietary TG 485 engine, has a power of 2.3 kW. The design uses a worm-type gearbox. Such a unit will carry out deep non-moldboard loosening to a depth of 33 cm. The width of the processed strip is 50 cm. There are 6 reciprocating cutters in the kit. The cost of the device is 15 thousand rubles.

At the same time, this 500V series model is equipped with a powerful 4.2KW American motor. Such a Texas cultivator uses attachments:

weeder;
rear hitch;
hiller;
weighting agent;
rake.

High functionality added almost no weight to the tool, only 43 kg. Only 6 cutters are included with the cultivator. Mounting hardware must be purchased separately.

The Lilli series includes the lineup of three tools - 532TG, 534 TG, 572 B. The power of the equipment in this series is affected by the type and power of the installed engines. And the most powerful of them will be the Texas 620 cultivator, which means that the equipment is equipped with a strong motor and can quite cope with the functions of a mini tractor if equipped with canopies. Mounted implements from stronger equipment, Futura and Vision walk-behind tractors are suitable for the Lilli series. The initial equipment of the units differs only in cutters, instead of pneumatic wheels on.

Read the operating instructions carefully. Use only recommended additives and fuels.

The Texas 532 TG 620 cultivator can be equipped with a cart, seat, snow blower and other attachments.

Main technical indicators:

output shaft power - 6.5 liters. With.;
processing width - 100 cm;
chain reducer in a steel case;
belt drive;
easy start system.

Another modification of this Lilli 532 V model has a cutter depth of 21 cm with a strip width of about 85 m. There are models using the TG500 motor.

Out of production, but there is a cultivator Texas 530 TG MY 13 PRC in retail chains. Reliable and the mechanism was replaced with an improved model. The product was assembled in China. The cultivator is equipped with a TG 500 Power Line engine with a combustion chamber volume of 163 cm 3 . In the initial configuration, the width of the processed strip could be set to 30-55 cm, but it was possible to lengthen the cutters up to 85 cm. The loosening depth is 32 cm. The model does not have a reverse, single-speed.

The Texas 601 cultivator is the most powerful of the units presented in the review. Included is a TG 650V engine, with a sleeve volume of 196 cm 3 . With a width of 85 cm, the cutters go deep into the ground by 30 cm. The hero weighs 56 kg. The car can work with any hinged equipment.

Video review of Texas cultivator

It might be useful to read: