How to connect a rear view camera. How to connect a camera to a Chinese radio. How to connect a mirror with a rear view camera

Isn't a camera a great way to make parking in tight spaces easier? Do-it-yourself installation of a rear view camera does not take much of your time. Consider the installation of a mirror with a built-in camera, as well as diagrams for connecting an external device to a multimedia system monitor.

Installation options

There are several ways to equip a car with a rear view camera ():

  • a separate camera that connects to a standard multimedia system or a self-installed screen;
  • a set of cameras with a rear-view mirror, on which the image will be displayed when moving back. This can be either a separate mirror or an overhead panel that will be mounted over the standard reflector.

Installation

You have to decide where exactly the camera will be mounted. Installation methods:

Optional equipment

One of the main problems is throwing dirt and ice on the lens. Even a few standard systems are equipped with such a useful function as camera washing. If you are installing an accessory in the trunk lid of a car that has a rear window washer, cleaning is very easy. You just need a tee, which will be implanted into the standard washer line in front of the rear window nozzle. As a spray, you can take a compact nozzle from any suitable car. Since the lens glass is small, there is no point in using a fan nozzle.

The second useful feature is the camera illumination, which in some models is built into the body. It should be admitted that in most cases, the harm from this function is much more than the benefits. The backlight illuminates the camera lens, and as a result, the image quality does not improve at night. A glare problem can arise if a rear view camera is installed next to the license plate light. In this case, replacing incandescent bulbs with LEDs can help. If such a move does not solve the problem, you will have to tinker with the protective screen.

Electronic component

Consider wiring carefully. The joints must be properly insulated. To prevent the wires from dangling or fraying, wrap them with cloth tape, if possible, fasten with ties to the standard wiring harnesses, or fix using the technical holes of the body elements. In the passenger compartment, wires can be pulled both below along the thresholds and behind the headliner.

Installing a rear view camera with your own hands will not cause difficulties even for a novice car enthusiast, but you need to approach the connection much more thoroughly. It makes no sense to consider the rear-view cameras that come with a special mirror. You just need to connect everything according to the instructions that are necessarily attached to the device.

For the normal functioning of the system, it is used:

  • two-wire cable for powering the camera;
  • two-wire video communication wire. To transmit video to the monitor, wires with RCA connectors (known to everyone as "tulips") are used. The conductors are not shielded, therefore, if necessary, they can be lengthened or cut for pulling in hard-to-reach places. In some variants, an additional excitation wire will come out of the RCA connector for correct system operation.

The excitation wire activates the screen of the radio with a "positive" current, forcing the system to automatically switch to the mode of broadcasting the image from the camera. The excitation wire is not required for all multimedia systems; in some devices, the automatic transition to the rear view camera is carried out via a video link. If such a function is not provided by the radio tape recorder or the device is not connected correctly, then you will have to change the image on the screen manually by pressing a special button.

Connection methods

The rear view camera and the car monitor can be linked wirelessly. This requires a special module. The power supply of the module is connected to the reversing lamp, and from the module it goes to the camera. The second wireless module is connected to the monitor power. The disadvantage of this method is the interference, which often prevents the normal transmission of the image. Also, this method is not suitable for radio tape recorders that need an excitation wire.

Let's take a closer look at the classic connection option. The essence of the above diagram is to connect the camera power to the reversing lamp, the voltage at the terminals of which appears only after turning on the reverse gear. The connector ("tulip") is connected to a standard output on a radio tape recorder or a screen designed for video communication. The field wire must be connected to the radio output, usually labeled “Reverse”. You can find out whether an excitation wire is required for your multimedia system from the technical documentation for the radio tape recorder. On this, the installation and connection with your own hands for most cars can be considered complete.

Fault monitoring system lamp

What if you have installed a rear view camera in your car and it only works when the car is muted? In many modern cars, usually with German roots, a lamp health monitoring system is installed. The PWM controller sends rectangular positive pulses along the power wires to the lighting fixtures, which helps to detect burnout of the rear lights. Since lamps are inertial, current ripple does not affect their operation. But the reversing camera will not work correctly with such interference.

To prevent such an effect, the camera must be connected to the reversing lamp through a relay powered by a cigarette lighter (there the current will already be constant). In this case, the "+" from the ZX lamps to the relay winding must be applied only after rectification by a diode and smoothing of the ripple by a capacitor. The "minus" for powering the camera must be taken as far as possible after the "mass" of the ZX lamps.

We offer you to watch a video with a detailed description of the method of eliminating interference in order to guarantee that you do not have problems with the picture on your car.

Today, a car is considered not a sign of luxury, but an ordinary means of transportation. If earlier not everyone could afford such a toy, now almost all families have an iron friend in the garage or in the parking lot. If just ten years ago the music playing in the car showed the status of its owner, now you will not surprise anyone with this. After all, modern technologies do not stand still. They are becoming more and more improved every year. Motorists can only keep track of them. So, now an on-board computer or a rear-view camera are very convenient devices that not only make life easier for motorists, but also reduce the risk of accidents and road traffic accidents. A rear-view camera (you can read how to connect to a radio tape recorder in this article) is a very convenient and practical device.

Installation locations

The rear surveillance camera is a great device to help any driver to park quickly and safely.

Such a tool can be installed in many places in the car. For example, in the mirror or wherever your heart desires. However, everything is not so simple here. Be sure to keep in mind that to install such a camera, you will need a special adapter or wireless module. At the same time, do not forget that all signals will be transmitted with a slight delay - a few seconds. However, in the real world, even this can cost life. Also, the presence of one more additional gadget in the car will focus your attention on it and distract you from safe driving.

A rear view camera (how to connect to a radio, you can find out in this article) has the greatest efficiency and comfort if it is connected to a car radio.

It is best to entrust the connection procedure to an experienced master. Such an operation does not take much time and is relatively inexpensive. However, with a strong desire, you can do it yourself. The main thing before this is to carefully read the instructions and arm yourself with the necessary knowledge and tools.

Preparatory work

The rear-view camera (how to connect to the radio tape recorder yourself, many drivers are interested) is installed quite simply. The main thing is to understand the general principles.

Before connecting the unit to the radio itself, you need to correctly install the camera. The first thing you need to do is disconnect the positive terminal on the battery. This action is taken for safety reasons, in order to avoid a short circuit, which can subsequently lead to a fire in the car wiring itself. If you don't want to do this, you can simply disconnect the entire battery.

Trunk inspection

The rear-view camera (how to connect to the radio tape recorder is described in this article, which means that any driver can try to do it on his own) has wiring, so it is very important to decide where you will lay it. Open the trunk and choose the best place for her. It is best to run the wires along the wiring that has already been installed. But the "eye" of the camera is best attached above the license plate or directly to the bumper. Experts advise against installing the camera on the rear window inside the passenger compartment. In this case, the picture will be very fuzzy.

Please note that you will have to worry about the wires in the front of the cabin. Therefore, disassemble several panels in order to gain access to the car wiring.

Under what condition the device will work

Please note that connecting a rear view camera to a radio tape recorder has certain nuances. Please note that the device will receive power only if you take it back. The rear view camera differs from the dash cam in the duration of the working time. If the second device can work continuously, then the first one - at most an hour. After that, it will turn off. In principle, this is logical. After all, the main purpose of acquiring such a device is to create simplified conditions for parking, and not for a full drive.

You have every chance to organize a wonderful tandem of a radio and a rear view camera. But before that, make sure that your car radio is equipped with a special LCD screen. After you have completed all the preparatory operations, you can safely proceed to the connection process itself.

Tools required for the job

In order to connect a rear view camera (Chinese radio or any other), you need to prepare some tools in advance. Namely:

  • scotch tape or electrical tape;
  • screwdriver;
  • glue or sealant;
  • keys and screwdrivers;
  • fuse 0.5 A;
  • sometimes a soldering iron comes to the rescue.

First stage of installation

In order to connect the rear view camera to the Pioneer radio, you first need to install the peephole itself for observation. This is done for all cars in the same way. In modern machines for these purposes, specially equipped "seats". If you find such a hole in your car, then it will be enough to pull out the pre-installed plastic plug from it and insert the video sensor you purchased.

If your iron friend does not have such a hole, do not be discouraged. You can do it yourself. An electric drill or a drill will come to your aid.

After you have drilled the corresponding hole in the bumper of the car, insert the camera "eye" into it, fixing it with glue or sealant.

Now you need to properly route the wires from the video camera itself into the trunk. At the same time, take the black wire and stretch it to the ground of the machine. This is very easy to do with the most common bolt. The positive red wire must be powered from the cable belonging to the rear lamp. And in any case, do not forget to connect the yellow wire to the camera itself.

When connecting the camera to the rear light, be sure to use a pre-prepared fuse.

The process of connecting to the radio tape recorder

After all the work with the peephole itself is completed, you can try to connect the rear view camera to the Pioneer radio. Continue to route the cable from the trunk to the passenger compartment, while securing it with tape or electrical tape. Try to carry out this action in such a way that the yellow wire is not pinched anywhere and does not get into the fasteners. Usually, a maximum of three to five meters of material is enough to carry out all work with cables, the diagram will help to do the job correctly. It will be much easier to connect a rear view camera to a radio tape recorder with its help.

Checking and setting

After completing all the work, you can connect the car battery and start the car. Now put in reverse gear. If a certain image appears on the screen, it means that you have completed all the work absolutely correctly. If not, then experts recommend performing the following actions:

  • go to the radio settings;

  • select the "Camera" section;
  • adjust all of its parameters.

That's all. The installation process is complete, which means you can enjoy the work you've done for a good reason.

A great way to make reversing easier while parking is to install a rear view camera. This will greatly facilitate the parking process for beginners as well as experienced ones in densely populated cities. But, it is still recommended to learn without parking sensors. Output of video broadcasting while the car is moving in reverse can be carried out on the rear-view mirror or on the car radio screen, or on a separate screen.

Types of rear view cameras for cars

Cameras can be divided into types and types by installation method, display method, price category, rating and demand.

Classification of cameras by display method:

    • wired;
    • wireless.

Camera classification by rating and demand:

      1. Sony (Sony). Sony rear-view wired cameras from 2 to 5 thousand rubles. Wireless ones cost from 20,000 rubles.
      2. MyDean (May Ding).
        • MyDean VCM-300C. You can buy it for 2600 rubles.
        • MyDean VCM-381C. You can buy it for 2700 rubles.
        • MyDean VCM-363C. The price is about 3000 rubles.
        • MyDean VCM-424C. The price is about 4300 rubles.
      3. Intro (Intro).
        • Intro VDC - 084.
        • Intro VDC - 103.
      4. Avis (Avis). Especially suitable for trucks and buses.
      5. Pleervox (Plirvox). The cost is about 10,000 rubles.
      6. Karkam. The price is around 10,000 rubles.

The camera can be purchased either separately or as a set with everything you need (wires, connectors, screen). If you take a separate camera, you will have to display it on the screen of the radio tape recorder, if it supports the output of video images, or even purchase a separate screen.

Rear view camera installation

Cameras can also be divided according to the installation site. Some cameras are bumper mounted, some are above the number.

There are several locations for the rear view camera:

  1. In the license plate light. With this method, the camera must be installed so that the room lighting is not blocked.
  2. In the trunk handle. Some cameras can be fastened to the handle with ordinary screws.
  3. On the license plate frame. When installing the camera next to the number, there may be such a problem as the camera being lit up, which will cause the light to interfere with the shooting.
  4. Into the bumper. You can mount the camera without removing the bumper. Oval cameras are better suited for bumper installations.

Optional equipment for rear view camera

Depending on the installation location and the weather, the camera can get dirty very quickly, rendering it useless. Dirt and ice quickly cover the camera lens. Only some cars have a standard function - a rear view camera washer.

There is additional equipment for the camera - a backlight. But, as practice shows, the backlight is dazzling and the video is of poor quality.

You need to accustom yourself to park correctly, because an incorrectly placed car can interfere with others and range from 1500 to 5000 rubles.

Wires and connectors

During installation, all connections must be well insulated. In order to avoid fractures as a result of frequent bending of the wires, they should be wrapped with cloth tape and tied to standard ties so that they do not dangle. Inside the car, wires can be laid along the bottom, under thresholds, and under the headliner.
If a beginner can install a rear-view camera with his own hands without much difficulty, then you need to be careful with the connection. If this is a set of a camera and a rear-view mirror, then yes, anyone can connect there without any problems.

For high-quality video transmission to the screen, you need to take into account the characteristics of the wires:

  • two-core wire for powering the camera itself;
  • two-core wire for transferring the image to the screen.

Video is transmitted to the monitor via RCA connector (so-called tulips or bells). For some options for connecting a rear view camera (KZV), the excitation wire will come out of the RCA connector. It is needed for high-quality video broadcasting.

The excitation wire supplies a positive current to the radio screen and the system automatically starts recording video. Some multimedia systems do not have a field wire. There, the camera is automatically turned on via the video link.

If there is no such function in the radio tape recorder, then you will have to switch to the video camera mode manually.

Connection diagrams

The camera can be connected using wires as well as wirelessly. A special module is required for wireless transmission. The power supply of the module is connected to the reverse motion lamp, then the power goes from the module to the camera. And the second wireless module is connected to the monitor power supply. This method is not suitable for radios that have a field lead.
The classic scheme for connecting a rear view camera is to connect power to the reversing lamp. Voltage in which appears after turning on the reverse gear on the gearbox. The tulip (bell) connector is connected to the standard output on the radio itself or the screen to display video. The excitation wire must be connected to the output on the radio (as a rule, there is a Reverse marking). From the radio tape recorder's passport, you can find out whether an excitation wire is required for this system.

Possible malfunctions after mounting and connecting the camera

It so happens that after mounting and connecting the KZV, the camera works only when the engine is off. Some cars have a lamp failure monitoring system. The PWM controller transmits a signal to the batteries and calculates which bulb is burned out. If there is a burned-out lamp in the car, the rear view camera will work intermittently.

To avoid such malfunctions during each burnout of a lamp, the camera must be connected to the reversing lamp through a relay (relay-regulator) with a current from the cigarette lighter. In the cigarette lighter, the current is constant. The minus for the reversing camera should be connected as far as possible from the mass of the reversing light. And "+" from the reversing lamps is fed to the relay coil.

Video

How to properly connect a reversing camera.

This video shows how to connect the camera yourself. The camera was purchased from Aliexpress.

Installation and connection of KZV.

Installation of a rear view camera with a mirror.

Once upon a time, not everyone could become the owner of a car, and if music could be heard from the open windows of a car, then its owner was considered a successful person who made crazy money. Today, a private car is not a symbol of luxury, but a convenient means of transportation that almost every family has. Technological progress continues to simplify our life, and now a radio tape recorder with a rear-view camera, pactronics or a "smart" on-board computer do not surprise anyone. These tools help to reduce the risk of collision on the road or while parking to almost zero.

Rear CCTV camera is considered to be the best tool for quick or difficult parking. It is usually installed above the car number and connected to the screen in the car. Car monitor for rear view camera can be integrated into the mirror or be independent. The last option is not very convenient for several reasons. First, to connect the camera, you need a wireless module or a special adapter with an RCA connector. In this case, the signal will be triggered with a delay of 2 seconds. Secondly, the presence of another gadget in the car is not pleasing to the eye. That is why now more drivers prefer to connect a video device to a car radio.

Connecting a rear view camera with your own hands in this case is not difficult, but if you doubt your skills, then contact a car service, where this service will be inexpensive. If you still want to do everything yourself, then you first need to prepare.

Preparing to install a rear view camera

In order to connect the device to the car radio, you first need to install the camera itself. Therefore, the first step is to disconnect the positive terminal on the car battery. This is done as a precaution to avoid short circuits and subsequent fires in the wiring. Or simply disconnect the entire battery.

After that, look in the trunk and determine where the camera wiring will be. Usually the wires are pulled along the existing ones. The "peephole" itself is most often mounted in the bumper or above the license plate in its illumination or in the very frame of the license plate. In the front of the passenger compartment, several panels also need to be removed. For example, you will have to disassemble the dashboard and dashboard so that you have access to the wiring.

Advice! It is not recommended to install the camera inside the passenger compartment on the rear window, as in this case the picture will be blurred.

Power to the camera comes from the reversing light, this is a necessary condition for the device to turn on as soon as you start to back up. The fact is that rear-view cameras, unlike DVR cameras, can work no more than 1 hour during continuous operation, after which they must be turned off. This is quite logical, because the main purpose of these devices is to provide visibility while parking, and not during the entire drive.

If you want to organize a tandem in which the radio tape recorder will interact with the rear view camera, then it will not be superfluous to make sure that the audio device is equipped with the necessary LCD monitor.

When all the preparatory work is completed, you can proceed to the installation.

Installing a rear view camera

Regardless of where the cameras are mounted, almost all of them are connected according to the same principle. To work you will need:

  • screwdriver;
  • fuse 0.5 A;
  • maybe a soldering iron may come in handy;
  • screwdrivers and keys;
  • sealant (can be replaced with glue);
  • insulating tape (can be replaced with ordinary tape).

At the first stage of installation, the camera “eye” is installed. Some cars have seats for them. If there is such a hole, then you need to pull out the plastic plug from it and simply install the video sensor there. If there is no seat, then a prepared drill or electric drill will come to your aid, with which you can make the necessary hole in the bumper. After the “peephole” has taken its place, it must be fixed with glue or sealant.

Next, we pull the wires from the camera into the trunk and connect the negative wire (usually black) to the mass of the car. This can be done using any bolt. The positive wire (it is usually red) is powered from the rear light power cable. Also remember to connect one end of the yellow wire to the camera.

Important! When connecting to the rear light, a 0.5 A fuse must be used.

At this stage, we figured out how to install a rear view camera on a car, now it's time to connect it to the radio tape recorder using a video cable.

Connecting to the radio

Once you have connected the camera to the vehicle's electrical network, route the video cable (yellow tulip plug) through the passenger compartment and secure with electrical tape. It is important that the yellow wire is not pinched or caught in the fastener. Typically, the length of the video cable is 3 to 5 meters, which is enough to route it in the most discreet way, even in a large SUV.

Helpful! If the length of the cable is not enough for you, you can extend it with another cable of the same type.

Next, we connect the cable to the tape recorder. To do this, first read the instructions for the radio tape recorder, although the principle is the same for most systems, some may still differ in their configuration. Also in the document you will find the specification of ports, their markings and the location of the input connectors. Usually it is sufficient to connect the other end of the tulip to the corresponding Video in socket.

A typical camera connection diagram is presented above. On most car radios that have the function of connecting a video camera, in addition to the video input, there is an additional wire for activating the inclusion of the radio in the mode of displaying the video image coming from the video camera. This wire is designated as "Reverse" or "BACK". Activation is carried out by applying a positive (+12 V) voltage to this wire. For this purpose, the manufacturers of video cameras complete their products with a special wire that has, in addition to the wires transmitting the video signal, one more wire (red, in the diagram it is designated as "P3"). One end of this core is connected, together with the + 12 V end of the "P2" connector, to the supply core of the reversing lights, and the other end to the additional wire of the radio.

If we are talking about a wireless camera, the connection principle is the same as described above, with one difference - instead of a yellow video cable, you will need to connect the included transmitter to the “Video in” port. This completes the installation of the rear view camera, the video of which you can watch at the end of the article. But, do not rush to assemble the interior trim, first you need to check that you did everything correctly.

Camera check and setup

In order to check how successfully the installation and integration of the camera into the radio tape recorder was, connect the battery, start the car and engage reverse gear. If an image appears on the car radio, it means that you did everything right. If the picture is missing or poorly displayed, try the following:

  • go to the radio menu in the settings;
  • find the section "cameras";
  • find the camera in the list;
  • adjust focus and other parameters of the "eye".

Thus, a car radio with navigation and a rear view camera are installed and you can enjoy all the comforts of this gadget.

In custody

Use fuses when installing any new equipment that involves connection to the onboard power system. This way you can avoid the unpleasant consequences of an incorrect installation. Fuses should be selected based on the capacity of the device you are installing. Take your time, carefully fix the wires and their connections with electrical tape, then your video system will work smoothly for a long time.

The last thing a driver wants to do is damage the car while parking on a busy street. Moreover, if it is someone else's car.

And the truth is, no matter how experienced the driver is, there is a subtle little thing that will cause trouble. In such a situation, a rear view camera comes in handy. It significantly improves visibility and avoids unpleasant excesses.

Today, many cars are equipped with this useful gadget, especially the premium segment. But early models lack this function, which means there is a reason to pick up a tool.

How to connect a rear view camera to a Chinese radio tape recorder today will be discussed.

How to choose a system

The automotive electronics market abounds in a variety of connectivity kits. This is especially true for products from China.

Indeed, for some owners, the quality of the transmitted picture or the backlighting in the dark is not at all critical. Therefore, it is not worth paying money for unused features.


For a better understanding of the devices presented, you need to understand the basic parameters. These include:
  • Video resolution. The higher this parameter, the better the video quality is on the screen. High-resolution cameras provide detailed images of the smallest objects behind the car.
  • Matrix sensitivity. Sometimes this parameter is indicated by the "ISO" symbol. Cheap models are not equipped with sensitive matrices, this directly affects the image quality in the dark. The picture turns out to be indistinct, it floats while moving.
  • Shooting coverage. The standard viewing angle range is 120-180 degrees. A high value helps to make the video panoramic, a lot of space will fit into the frame. But there is an insidious moment: at such angles, the real dimensions of objects are distorted, which can deceive an inexperienced driver. Therefore, the optimal solution should be sought between these values.
  • Camera body and installation type. Waterproof devices can be safely installed outside the car, they are not afraid of water and dirt. But they will always be available to thieves. Indoor cameras are installed in the luggage compartment. Space coverage will decrease, but the device will always be dry and protected from prying hands.
  • Connection type. The standard is a wired connection. A cable is laid from the monitor or radio to the back of the car. More unusual is the wireless connection. The driver does not need to remove the trim and hide the wiring. But this method requires additional accessories - transmitters.
  • Rear cameras with backlight function. Such devices can be easily navigated in the dark. Illumination is carried out by infrared diodes or an additional lamp. This function is useful for those cars in which the taillights are small and give low light. Whether this type of cameras is needed - the owner decides individually.

It is necessary to pay attention to the method of displaying the image. It can be a separate monitor or a 2din radio with a built-in screen. If the quality of the latter suits, there is no point in installing a second monitor.

How to connect a camera to a radio tape recorder with your own hands

Initially, you need to choose an installation location. There is enough space in the rear of the car, but when you take into account the coverage of the broadcast picture, the choice decreases.

It is worth considering the location of the camera eye. He should have a view over the entire shooting angle and not be obstructed by other body elements.

There are two installation options: under the license plate and under the rear window. Here it is worth considering the type of car body. For station wagons, due to the lack of a long trunk, both methods are suitable. For sedans, the best place is in the license plate compartment.

Let's move on to the connection. Before starting work, you must prepare the tool:

  • the camera kit itself with wires;
  • screwdriver;
  • keys set;
  • pliers;
  • plastic ties;
  • electrical tape or heat shrink tubing.

Sometimes you may need to drill multiple holes to mount the rear camera. In this case, you should stock up on drills and a drill. Some car models have a prepared place for the camera, for which it is enough to pull out the factory cover.

Prepare the vehicle interior for wiring. Pull the upholstery gently. Choose a location where the cable will not be deformed by the feet of passengers, and avoid sharp bends in the cable. It will be reliable to strengthen the wire on the standard highway cars. Secure the line with plastic ties.


Let's move on to connecting a rear view camera to a Chinese 2din radio tape recorder. To get to the ISO connections and the back of the audio system, you need to carefully open the front panel (or several, depending on the car) of the torpedo, and unscrew the fastening screws. The head unit can be detached.

Advice: for the safety of the electrical circuits of the machine, all connections should be made with the battery disconnected. This eliminates the risk of an accidental short circuit to ground.

Diagram of connecting the camera cable connectors to the car radio

When the preparatory work is completed, the cables are laid, you can proceed to connecting all the components of the system.

Let's take a closer look at the diagram:

A standard connection cable consists of two parts:

  • yellow - signal;
  • red - food.

Note that the colors of the voltage wires may vary on different models.

The video signal connection is made via cinch connectors.

The standard method for powering and activating the camera is through the reversing lights. The principle of operation is as follows:

  • The red wire is connected to the lights, the black wire to the car ground.
  • The signal cord, through the trunk in the passenger compartment, is connected to the radio tape recorder through the Video In connector.
  • When the reverse gear is engaged, a voltage appears on the supply wire of the camera, which activates it.
  • The radio tape recorder detects the signal on the input channel and switches to the image broadcast mode.

Very often, the radio is connected via the ISO connector. In this case, you should familiarize yourself with the connection pins and find the video input.

The second connection method allows the surveillance system to be activated regardless of reverse gear. For this, 12V is supplied to 2 wires - red and blue. The first is connected to the ignition switch, to the key1 position - ACC. The second is supplied to the reversing lamps.

With this method, the system will operate in two modes:

  • when shifting into reverse gear;
  • in key positions key1 and key2 - Ignition, which corresponds to the on-board network switched on and the vehicle ignition.

Some models of radio tape recorders require manual activation of the shooting mode in the "settings" of the device. After activation, you should check the work in different key positions, especially in key2.

The next step is to adjust the radio itself, namely focus, sharpness and light sensitivity. Different systems offer a different set of settings, so configurations are individual.

Tip: It is important to observe strict correctness when connecting the wires. In order not to be mistaken, it is recommended to assemble the system on a table and configure it. When connecting the supply components to the vehicle network, protect them with fuses.

Connecting a car reversing camera to a laptop

To be able to view the picture on a laptop, you need a special TV tuner. It can be used to match an analog signal with a computer.


The connection principle remains unchanged. The supply wires are supplied with 12V, and the video signal tulip is supplied to the tuner. The survey is controlled through software.

There are models on the market for two-zone monitoring of the vehicle space - front and rear. This solution allows you to register possible emergency situations on the road, and to record the state of the car in the absence of the owner.

Connection and configuration is carried out in the following order:

  • the on-board network of the car is de-energized;
  • the front camera is mounted on the rear-view mirror holder;
  • mount the back;
  • for aesthetics, connecting wires are led to the head module under the interior trim;
  • if the head unit has two Video In inputs, connect the signal wires to them. In the case when the kit has its own recorder - choose the place of its installation, connect it to the network and cameras;
  • we check the connections according to the installation diagram, turn on the battery;
  • configure the parameters of the cameras.

It remains only to test the system in motion and, if necessary, make corrections.

Sometimes it happens that one of the cameras does not provide adequate coverage of the space in front of it. The way out is to purchase a “Fish Eye” patch. It acts as a wide angle lens and widens the field of view.

The way to connect such a mirror is no different. The connection diagram looks like:


Often, sets of mirrors with cameras can take power from the cigarette lighter, through their own connector. The owner can choose which power supply method suits him best.

More expensive mirrors support both sides of the vehicle. The front camera is already integrated into the product body and does not require connection.

Lovers of high-quality audio systems Japanese equipment. But they have their own nuances when connecting video cameras.

Consider an example on a Pioneer 2din radio tape recorder. The installation has a similar procedure:

  • The camera is powered from the reversing light.
  • The signal cable is connected to the Video In connector. Typically, in this model, a brown tulip is responsible for capturing video.
  • We check in the settings the inclusion of the camera and its operation.

The system works, but will not turn on automatically when driving backwards. It is enough to connect the purple wire of the head car radio to the rear light, where the camera is. The problem will be fixed when the reverse gear is engaged. The radio tape recorder will understand that you need to activate the shooting mode.

The rest of the installation points of the device remain the same.

Conclusion

Rear-facing or front-facing cameras have proven themselves to be the best among car enthusiasts. With their appearance on board the car, it becomes easier to navigate in confined spaces. Their correct installation requires some knowledge from the owner. But with the given tips, any driver can do it.

 

It might be useful to read: