Field of application of the cultivator texas. Field of application of the Texas cultivator Presale cost

Delivery terms

Moscow and Moscow region:

Delivery is carried out the next day after ordering the goods, but there may be exceptions
- delivery time: Mon.-Fri. from 11:00 to 22:00
- delivery of goods is paid directly to the courier and only in rubles

Delivery cost in Moscow and Moscow region:

Delivery within Moscow of orders worth less than 30,000 rubles. - 650 rubles, orders over 30,000 rubles. - free

Delivery in the Moscow region: delivery in Moscow + 40 rubles. for 1 km. from MKAD

Item lifting:

Delivery of heavy and bulky goods is carried out to the entrance
- delivery of oversized goods and weighing up to 20 kg. made to the apartment
- it is possible to lift the goods, provided that it can be done by one person:

When lifting goods without an elevator - 100 rubles per floor, but not less than 300 rubles.
when taking the elevator - 300 rubles

Pickup:

There is no pickup.

Delivery to regions:

Carried out by transport companies
- payment for delivery to the transport company is carried out at the rate of Moscow
- the services of transport companies are paid by the recipient upon receipt of the goods

You can calculate the approximate cost of delivery using the calculation program on the websites of transport companies:
Business lines http://www.dellin.ru
Zheldorexpedition http://www.jde.ru
Autotrading http://www.autotrading.ru
DPD http://www.dpd.ru

Terms of payment

The minimum order amount is 1000 rubles.
The minimum order amount by bank transfer is 5000 rubles.

Cash payment:
You can pay for the order in cash upon delivery to the courier.
You can pay for the order in cash upon pickup.
Payment is accepted only in rubles.

Payment by bank cards:
(temporarily not accepted) pay electronically
You can pay for the order upon delivery by credit card.
This service is possible only upon delivery by courier in Moscow and the Moscow region or upon self-pickup.
If you are in another city, then in order to pay by credit card, you need to select "electronic payment methods"

Rules of payment for goods from regions:
You can pay for goods upon delivery to other regions in two ways:
1) According to the receipt at the bank
2) Electronic payment methods

Payment on receipt at the bank:
After placing your order, we will send you a receipt by email.
The name of the payment must contain the product you have selected.
After the receipt of money on the account, we take the goods to the transport company, having previously notified you about this.

Electronic payment methods (without leaving home):
- Bank cards (Visa, MasterCard)

Payment by bank transfer:
Legal entities:

To pay for goods by bank transfer from our online store, we will send you an invoice with the payment method agreed with you.
The invoice and goods reserve are valid for three banking days. If during this time you do not transfer funds to pay the invoice, it becomes invalid and you will need to receive a new invoice for payment. If you need to extend the reserve, then you must contact us in any convenient way. The goods are released after the funds are credited to our current account. To receive the goods, you must provide the original power of attorney from the paying organization with an indication of the material assets received or certify our copy of the consignment note with the seal of the paying organization.

Please confirm the payment of your order by sending a copy of the payment order.

** Due to the unstable level of the dollar and euro exchange rates, the prices on the site may not be relevant.
Please contact the managers to clarify the exact information on prices, availability and reserves.
Hope for understanding!

If you are a client of the Garden Mechanisms online store, then you can use the service of qualified pre-sale preparation of equipment. It is implemented on the basis of its own Service Center, which has authorization and certificates from the world's leading manufacturers.

The further operation of the equipment depends on how the equipment starts in operating mode. In our case, an experienced employee of the Service Center will perform a test run at idle speed. Especially for our clients, we will adjust and adjust the equipment so that it is ready for the upcoming loads. After that, if the verification results do not cause any claims, the tool is sent to its rightful owner.

What are we doing?

check of the complete set (at opening it is checked whether everything is in place)
assembly of the finished product (if necessary)
checking adjustments
oil filling equipment
lubrication control in gearboxes and gearboxes
product launch

Everything for the Client

As soon as the tool is unpacked for pre-sales training, a professional works with it. Therefore, we can guarantee the quality of our services.
You get equipment 100% ready for work.
Competent commissioning results in excellent results in the future.

Important

When making a purchase of gasoline-powered tools, the managers of the Garden Mechanisms online store offer everyone a pre-sale preparation service. If you wish, you can refuse this service.

In what cases are pre-sale preparation canceled?

If you wish, receive the product in its original packaging and open / assemble it yourself.
If the product is planned as a gift and traces of equipment operation are undesirable (residual fuel in the tank, filled oil, opened packaging).
In case it is supposed to be transported further, which is impossible with the assembled product. For example, it is assumed that the goods are sent through a transport company or by mail, or further transportation is planned by transport, where the assembled product does not fit in size.

Presale cost

The price includes: unpacking and checking the complete set (at opening it is checked whether everything is in place), assembly of the finished product (if necessary), checking the adjustments, refueling equipment with oil, refueling, control of lubrication in gearboxes and gearboxes, starting the product. Oils and greases are not included in the equipment assembly cost.

Gasoline is poured minimal quantity. The approximate cost of assembling the product can be found in the table. The cost depends on the degree of complexity of the assembly and the time spent on it. Terms, conditions and the exact amount of assembly / pre-sale preparation, check with the manager when placing an order. Free pre-sale preparation applies only to all products of brands and. Products from these manufacturers are marked with a special “Free Presale” badge.

Installation and assembly of additional attachments for tractors and motoblocks is paid separately and the cost depends on the type of equipment and the complexity of the work. Check the terms and cost of this service with the managers.

Chainsaw, Trimmer (with two-stroke engine)	RUB 1000
lawn mower, motor drill, trimmer (with four-stroke engine)	RUB 1,500
Garden tractor / rider	RUB 3000
Snowblower, Cultivator, Motoblock	RUB 1,500
Big tractor	RUB 5,000

The Russian market of gardening equipment is being mastered by foreign models. Texas cultivators represent a Danish company of the same name. Since 1960, the manufacturer has been developing a narrow direction and has succeeded in this. Texas gardening equipment is made with special care for the farmer. Cultivators and walk-behind tractors of the company work reliably.

Service maintenance of equipment by the company

Texas cultivator repair and technical service are provided by specialized centers. The operating instructions list the addresses of the repair shops. The tool has a 3-year warranty, so the first step is to determine the location of the repair center and the possibility of service. This applies to the warranty part of the instrument. You can fill in lubricant, replace the belt on a non-Texas cultivator in any workshop or on your own.

Breakdowns of equipment operating in severe conditions are classified:

engine breakdown;
failure of automation;
failure of mechanical components.

It is these problems that will require contacting a service center.

When buying a Texas cultivator, you need to stock up on both branded gear lubricant and drive belts. Finding the BOM in the included manual is easy. The numbers and letters of the marking indicate the size and profile of the belt. The designation TEXAS A 41 1/2 13X1050Li is read, a V-profile belt with a height of 8 mm and a wide part of 13 mm wide, reinforced with a cord thread, length 1050 mm. The markings are on the wider part of the ring, as indicated in the Texas cultivator instructions. The manual is translated into machine language, but the technical terms are clear.

In addition, in the instructions it is necessary to learn the rules for preparing the cultivator for work, the frequency of replacing the engine oil. Please note that the first change of crankcase oil is carried out after 5 hours of operation. You need to use the recommended fuel in the work, it differs in different models.

Spare parts for the Texas cultivator are purchased at service centers. They will be delivered, even if the model has been in operation for a long time and is out of production.

Characteristics of Texas cultivators

Manufacturers have provided for the release of equipment for different areas and depth of processing. Some models do well with garden beds, while others are able to lift fallow areas with heavy soil. At the same time, the range of used attachments increases the sector of equipment use.

If the cultivator is buried in loose soil, reduce the throttle, put the wheels in the middle position, adjust the coulter.

Design features of Texas motor cultivators:

the machine control panel is placed on the steering wheel of a special design with a comfortable grip;
a lightweight rear console improves centering and reduces weight;
an exclusive frame made it possible to lower the center of gravity, facilitate the operation of the device;
the engine is placed above the cutters, the unit has become stable;
there is a front bumper to protect the motor and transport wheels.

Constructive changes to the Texas cultivator added manufacturability to it. So, all devices have a reverse, no effort is required to pull out a buried car. The powerful ones work on a wide strip of dense soil to a depth of 30 cm. All machines are chain-driven and equipped with reliable four-stroke engines. The disadvantage is the increased noise during work and burying the nose in soft soil.

Do not use a cultivator to cultivate glades after cutting. The sabers will surely break at the roots! Full load on the cutter can be applied after running in.

Varieties of cultivator models

The range of Texas equipment is divided by the power of the units and the type of work performed. The Hobby series, as the name implies, is used in small areas with light soil. Lightweight cultivators are indispensable for preparing beds for root crops, decorating flower beds and digging greenhouse land.

Cultivator Texas Hobby 300 is small and daring. He will climb into any corner of the garden, process the trunk circle, cut the beds. Power equipment - American Briggs & Stratton engine, four-stroke, with combustion chamber 148 cm 3, power 2.6 kW. The design uses a chain reducer. The unit processes 38 cm to a depth of 18 cm. The unit weighs 28 kg and costs 21 thousand rubles.

The Texas 500 Hobby cultivator, with a proprietary TG 485 engine, has a power of 2.3 kW. The design uses a worm-type gearbox. Such a unit will carry out deep moldboard-free loosening to a depth of 33 cm. The width of the processed strip is 50 cm. The set includes 6 saber cutters. The cost of the device is 15 thousand rubles.

At the same time, the model of this 500 V series is equipped with a powerful American 4.2 kW engine. Such a Texas cultivator uses attachments:

weeder;
rear hitch;
hiller;
weighting agent;
rake.

High functionality almost did not add weight to the instrument, only 43 kg. Only 6 cutters are included with the cultivator. Attachments must be purchased separately.

The Lilli series includes a range of three tools - 532TG, 534 TG, 572 B. The power of the equipment in this series is influenced by the type and power of the installed motors. And the most powerful of them will be the Texas 620 cultivator, which means that the equipment is equipped with a strong motor and copes with the functions of a mini-tractor if equipped with awnings. Attachments from more powerful equipment, Futura and Vision walk-behind tractors are suitable for the Lilli series. The initial equipment of the units differs only with milling cutters, instead of pneumatic wheels on.

Read the operating instructions carefully. Use only recommended additives and fuels.

The Texas 532 TG 620 cultivator can be equipped with a cart, seat, snow blower and other attachments.

Main technical indicators:

output shaft power - 6.5 liters. with.;
processing width - 100 cm;
chain reducer in a steel case;
belt drive;
easy start system.

Another modification of this model, Lilli 532 B, has a depth of entry of the cutters of 21 cm with a strip width of about 85 m. There are models using the TG500 motor.

Discontinued, but there is a Texas 530 TG MY 13 PRC cultivator in retail chains. Reliable and the mechanism was replaced by an improved model. The product was assembled in China. The cultivator is equipped with a TG 500 Power Line engine with a combustion chamber volume of 163 cm 3. In the initial configuration, the width of the processed strip could be set 30-55 cm, but it was possible to lengthen the cutters up to 85 cm. The loosening depth is 32 cm. The model has no reverse, single-speed.

The Texas 601 cultivator is the most powerful of the units presented in the review. The complete set includes the TG 650B engine, with a liner volume of 196 cm 3. With a width of 85 cm, the cutters deepen into the ground by 30 cm. The hero weighs 56 kg. The machine can work with any attachments.

Texas cultivator video review

It might be helpful to read: