How to connect 3g on android. Setting up and choosing a connection method. Video: what to do if mobile Internet does not work

Everyone with an Android device wants to have access to the internet. After all, sometimes you want to kill time or just find something interesting. All Android devices, when they first connect to modern 2G and 3G networks, automatically receive settings from the operator for accessing the Internet. But there are also exceptions. In which case? For example, if the phone was brought from abroad. This happens, everyone is looking for the reason on the Internet, and therefore we decided to write about it.

In order to configure GPRS / 3G on Android, you need to go to "Settings" - "Wireless networks" - "Mobile network". Here, if you accidentally turned off automatic detection of settings, you can turn them back on. How to do it? We pass to the item "Communication operators". Searching for operators. Then you can click "Select automatically" or choose your operator from the proposed list.

There is another option for setting up the Internet: you just need to call the help desk of your cellular operator and ask for automatic settings or send an SMS to a number that can be found on the operator's website.

If after all this, the settings are not determined, then there is one more option - entering the settings manually. To do this, go to the "Access Points (APN)" item. Then we press "Menu" - "New access point". And we enter the data of the access point, which can be found on the operator's website. Most often there are such fields for filling:

Name - you can enter any name.

APN (Access Point):

For Russia

for MTS: internet.mts.ru

for BeeLine: internet.beeline.ru (if you use a SIM card from a USB modem, then APN must be replaced with home.beeline.ru)

for Megaphone: internet

for Tele2: internet.tele2.ru

for Yota: internet.yota

For Ukraine

for Vodafone: internet

for Lifecell: internet

for Kyivstar: www.ab.kyivstar.net

Username

For Russia

for MTS: mts

for BeeLine: beeline

for tele2: no need to enter

for Yota: no need to enter

For Ukraine

For all mobile operators you do not need to enter

Password:

For Russia

for MTS: mts

for BeeLine: beeline

for Megaphone: no need to enter

for tele2: no need to enter

for Yota: no need to enter

For Ukraine

For all mobile operators you do not need to enter

Please note that Ukrainian 3G / 4G operators may have names and passwords issued at the conclusion of the contract.

If your operator is not in the list, the settings can be found on his website. As a result of performing one of the above methods, you should be able to connect Android to the Internet. If it didn't work out - write in the comments, we will try to help as much as we can)
After entering the settings, make sure that mobile data transfer is enabled in the settings, and also make sure that the account has money / megabytes so that the Internet can work. If the Internet does not want to work, try turning off and then turning on your smartphone / tablet.
For Beeline, you may need to select only CHAP authorization, otherwise it may just not connect to the mobile network at all, especially in the case of a device from a foreign market.
Settings - Mobile network - APN - Beeline internet - Authentication type: CHAP.

Sometimes operator codes (MNC) are not set automatically, in which case you can enter them manually, this setting in Android is split into two fields: MCC - for all Russian mobile operators 250, for Ukrainian 255, Belarusian 257, Kazakhstan 401. MNC are the last two digits of the operator code, for example, 25099 - for beeline, MCC 250 MNC 99

MNC for Russian operators:

01 MTS

02 MegaFon

03 NSS

05 ETK

11 Yota

12 BaikalWestCom

16 New Telephone Company

17 Utel (formerly Ermak RMS)

20 Tele2

35 MOTIVE

37 SkyLink

39 ROSTELECOM

99 Beeline

MNC for Ukrainian operators:

01 Vodafone

03 KYIVSTAR

05 Golden Telecom

06 Lifecell

High-speed 3G Internet is distinguished by signal stability, the ability to connect to any device, favorable tariff rates and a wide coverage area. Therefore, it is very popular among people who want to always stay in touch. YS Service offers the best conditions for connecting 3G-Internet in Moscow and the Moscow region in one day.

What is needed for this?

This requires very little:

Connection request.
Checking the signal strength in your area.
Selection and installation of equipment (3G-modem or Wi-Fi router).

The selection of equipment will depend on the type and number of devices through which you plan to access the 3G Internet, as well as on the signal level. Basically, the connection to the network is via a modem. This is the easiest, most affordable and effective way. The modem connects to any device with a USB connector: smartphone, laptop, tablet, computer, TV, and so on. You can do it yourself or involve specialists.

Modern models of modems come with built-in drivers and software and do not require additional configuration. If you need to install drivers, you will have to use step-by-step instructions, but not the fact that you will succeed. And our specialists will cope with the task in a matter of minutes. Therefore, the installation of the equipment will not take long.

Benefits of working with us

Selection and installation of equipment is the most important stage of connecting a 3G Internet. The quality and comfort of your use of the World Wide Web will depend on its implementation. Therefore, rely on the professionalism of YS Service. Having made an application for Internet connection with us, you can be sure that:

a qualified specialist will arrive at your address at any time convenient for you;
you will receive a 100% guarantee for the quality of equipment and work performance;
we will do our best to strengthen the 3G signal and increase the data transfer speed;
we will advise you on which tariff plan is most suitable for you.

Have you decided to connect? Call us now! With the Internet from YS Service, you will always and everywhere stay connected: 365 days a year, 7 days a week and 24 hours a day.

Enabling 3G Data Transfer on Android Smartphones The development of mobile networks during their existence has stepped forward. Many modern users of mobile devices still remember the slow wap-internet, which five years ago was the ultimate dream. The needs of users grew and the capabilities of mobile operators grew along with them. Soon the slow gprs was replaced by the edge standard, which significantly expanded the capabilities of the mobile Internet. The data transfer speed has noticeably increased and it became possible to open full-fledged pages directly from a mobile device. However, edge was replaced by the high-speed 3G standard operating in a new frequency range.

Almost all modern smartphones support work in the 3G range, both in the call mode and in the Internet connection mode, you can turn on 3g.
So, you have become the proud owner of an Android OS device. However, when you first try to access the World Wide Web, the device browser shows you only a dull message about the impossibility of establishing a connection.
Before turning on 3g for android, you should make sure that the Internet options are active on your tariff and that there is a positive balance on the account. If both conditions are met, but the Internet still does not want to work, then you should study the device settings.
Before you the task on android to enable 3g?
On the desktop of your device on Android, you need to find the "settings" shortcut, on different versions of Android this menu item is displayed differently, but all designations are intuitive. Going to the "settings" section, to enable 3g on your android, you will need to find the subsection responsible for configuring wireless networks, most often it is indicated by the Wi-Fi antenna icon. In the window that appears, you need to find the APN settings of the access points, most often the installation data is hidden under the inscription "more" or "additional"

The next step for turning on 3g will be setting up an apn access point for your operator or operators, if you often change SIM or your device supports more than one SIM card. Immediately before configuring the access point, you should allow the device to transmit data via the mobile network by checking the box opposite the corresponding item in the same menu.

Next, to enable 3g on android, go to the window called "APN access points" and fill in the appropriate items depending on the requirements of the mobile operator. You can find out the exact data for entering by contacting the website or the operator's support service. The name of the profile you have created can be arbitrary and convenient only for you - this data is not sent to the network and serves solely for the user to easily select from several access points.

After saving the settings and selecting an active access point, you should return to the main screen and check the Internet connection. The checkbox for allowing data transmission via the mobile network should be left on on an ongoing basis, only in the case of an unlimited Internet connection.
In other cases, it is recommended to turn on 3g every time before the need to use 3G. This is due to the active update of the programs installed on the device, the constant search for available device software updates and other reasons beyond your control for using mobile traffic by the android device itself, which will invariably affect your balance.

It is still used in many banking systems and is highly resistant to hacking and data leakage. Unfortunately, on the territory of Russia it is very expensive, but this does not negate its degree of demand for a certain circle of people.

GPRS technology is a "packet" technology, it collects all information into conventional units (packets) and transmits them at a speed of 56 before 114 Kbps. This provides Internet access, download of melodies, pictures, games, transmission of short multimedia messages (MMS), communication via ICQ or mail.

EDGE transfers data about three times faster than GPRS - in theory EDGE is capable of supporting file transfer speeds of up to 474 kbps, while the peak value for GPRS is 171,2 kbps. The numbers speak for themselves, although in practice the speed indicators are much more modest.

(from the English third generation - the third generation) - the technology of mobile GSM-communication of the third generation, which combines both the possibilities of voice communication and high-speed mobile access to the Internet. The third generation of radio communication differs from the previous versions in the increased operating speed, transmitting data at speeds up to 3,6 Mbps. This makes it possible to use all the advantages of high-speed Internet on a mobile device: watch on-line films and TV programs, organize mobile video telephone communication, download large amounts of data, etc.

Step 1. Connect the GPRS / EDGE / 3G service

All operators have GPRS / EDGE / Internet service initially connected. But in some cases, you need to activate the service yourself. The speed of Internet access depends on the device that the user is using at a particular moment and on the coverage area in which he is. The coverage is much inferior to GPRS / EDGE, but at the same time it gives a huge gain in the speed of connection to the network.

23.12.2017

Today, 3G time is the most common type of Internet connection on Android devices. The main advantages of enabling 3g on Android are mobility, 3g coverage is increasing every day and is becoming very popular.

However, there are also minor cons:

Price, although in principle this is a conditional minus;
The transfer speed, well, like everywhere else, everything is different and not always good, unfortunately;
Unscrupulous, who promise you an unlimited tariff, but as soon as a certain amount of traffic is consumed, they reduce the speed to a minimum.

But in general, 3g connection is the most common and convenient way to connect to the world wide web on smartphones, despite these disadvantages.

Make sure you have a good, reliable network connection. If you get a No Route Available message, try connecting to a different station, try connecting later, or test an open proxy instead of a relay. Don't try to connect. This doesn't work in most cases. 😉 Do not use direct mode unless you have implemented appropriate port forwarding rules in your router. If you have a flat rate fee with your carrier, there is probably no additional charge.

This is audio streaming and it works over packets of data - that is, regular internet translation. If you have any doubts, please contact your mobile operator. Unfortunately, these platforms are very different from each other, so software development for everyone will involve four separate developments. There are currently no projects to develop versions for other mobile platforms. Is the wireless internet a little slower? Or maybe you just want to squeeze even more energy out of your connection?

3G setup

Let's take a closer look at setting up and enabling 3g connection on Android.

To begin with, you need to find out two things: whether your operator provides such a service and whether you have money on your account. It is necessary to contact the Call-center of your operator and there you will receive complete information.

Let's immediately consider two types of connection 3Gin Android:

If so, we have a great solution for both rooted and disorganized people. If we don't have a root, we have the "Improve Internet Connection" option at the bottom. It changes as much as the system allows with normal user permissions. The optimization should be visible, but not as good as the first option.

Updating the firmware can fix problems that the previous firmware version may have and improve current performance. Check the hardware version of the device for the corresponding firmware version. Product damage caused by using third-party firmware will void your warranty.

The access point is found automatically;
Self-creation of an access point (manually).

Automatic tuning

So, decided to find an access point automatically? Let's go to the device menu, item “Settings”, then “Wireless” and “Mobile network”. We find the submenu "Telecom operators", here the search for a telecom operator will automatically begin. If your operator has appeared - we press "Select automatically", if not - we choose from the list ourselves. A little later, the network settings will be added automatically.

Open source for programmers

When it's not a week without a cyber giant being attacked by hackers, it's more important than ever to understand the benefits of a personal cloud. The magic of making this decision is that your files can be accessed over the Internet without being on the Internet. It's incredibly easy for us to subscribe to a cloud storage service today, and you will likely subscribe to one or more without realizing it.

These are just a few examples, but in practice there are many more. The benefits of such a service consist of the large-scale, easy-to-implement implementation and the flexibility offered by a significant number of applications for any platform. Any device connected to the Internet is subject to some kind of vulnerability, but at least when that device is in your living room, you can slightly improve communication in a chain of weaknesses. Interest in your little cloud of holiday photos does not endlessly exist on a global level.

Manual point APN creation

This method is the most preferred, but also more difficult. Go to the device menu, item "Settings", "Connections" (Data transfer), look at the sub-item "Other networks" (in some models it is "More ..."), and then the item "Mobile network" (Mobile networks).

It's not like that at all. In practice, the latest media storage models for network deployment are becoming more and more user-friendly. Plus, they can be easily obtained remotely and are incredibly easy to update. By the way, you can do all the initial setup of your device using the mobile app.

In principle, many of the defaults that you find on the device configuration page can be left unchanged. On the same web page where you can define the above options, there is an app store that you can install. Many of them will be useless, and useful ones are already installed. If you don't know how to set up routers and extended ports, you can securely access your data from anywhere in the world using any browser and device. You can upload files from this web interface or upload new ones.

We put a tick on “Mobile data” and go to “Access points”.

We call the pop-up menu by pressing the corresponding button and select “New access point”.

The screen will display - "Change access point", here we indicate "Name" (any), from the operator - "Access point" (APN), "Username and Password".

Access point: internet.mts.ru
Name: mts
Password: mts

Access point: internet.tele2.ru
Name: Not entered
Password: Leave blank
Megaphone:
Access point: megafon
Name: megafon
Password: megafon

Access point: internet.beeline.ru
Name: beeline
Password: beeline

The required operator is missing from the list? We turn to our own and find out this data.

If you've put in a lot of financial effort and put your hands on your personal cloud, you should do everything in your power to take advantage of all of its advanced features. As a result, it won't be difficult for you to implement a new project. Optionally, you can choose to sync one way.

After this time, you can transfer files in one direction or another. When dragged and dropped, the most important data will work most quickly using your personal cloud concept. From this screen, you can create new network locations or delete multiple folders until you get the perfect document layout you have in mind. How do you access your personal cloud files using your smartphone or tablet? How do you share them with your friends. The speed at which you move your files remotely depends on the download speed associated with your internet service contract.

Here I will give you a hint. There are times when CHAP authorization is required for Beeline, otherwise connection problems may arise, especially if the device is from a foreign market. In this case, the Authentication Type is set to CHAP.

It should be said that, for example, for Fly, Huawei, Lenovo, the "Authentication type" field will be "Not set" by default. For the Internet to work correctly - set "No".

Basically, using this utility, you can open any documents, images, songs or movies remotely. Many of them can be played initially, and if this gesture is not possible, you can open the file at any time with another application installed on your tablet or smartphone.

Download remote torrent files and many more benefits

The standard email body can be seen in the above message. It is enough to enter the program settings page by clicking the three dots in the lower right corner and a second click on the cogwheel. You need to click, select the target directory for your photos and videos from your phone and wait. Several images from this program can be seen in the collage above. Plus, you can quickly download something from a torrent. Once you agree that the legality of this activity is questionable, you have a very effective torrent search engine.

Do not touch the rest of the settings, leave them by default.

Now we select the created access point and use it.

There are also cases when operator codes (MNC) are not automatically registered. They can be viewed in the "Change access point" menu, just above the "Authentication type". Then you have to enter them yourself, in Android it looks like two submenus: MCC and MNC. If MCC for all Russian operators is 250, then MNC is the last two digits of the operator code. For example, 25001 - for MTS, MCC 250 MNC 01.

The MNC code is different for different operators:

MTS - 01,
MegaFon - 02,
НСС - 03,
ETK-05,
SMARTS - 07,
Yota - 11,
BaikalWestCom - 12,
New Telephone Company - 16,
Utel (formerly Ermak RMS) - 17,
Tele2 - 20,
MOTIVE - 35,
SkyLink - 37,
ROSTELECOM - 39,
Beeline - 99.

To determine if the 3g connection is enabled on the Android device, we look at the settings, everything is visible there.

Correct settings for you and smooth operation!

How to enable 3G on Android.

3G connection is the most common type of data transmission today using the Android OS. And if no one has any problems using this communication standard, then sometimes you have to tinker with the correct setting. For the most part, the necessary settings are already flashed into the phone for a specific regional operator, but there are often situations when the owner of this device is forced to enter data for each APN point independently.
In most cases, users don't need to configure anything
What if 3G won't turn on?
The first step is to check the balance of the SIM card. Then - make sure that the "3G" service is activated and is included in the tariff. If you have doubts about this, or you simply do not know how to check it, call the call center of your operator and find out if the tariff plan you are using really includes 3G Internet services.

After that, after making sure that the 3G service is connected and there is money on the account, we go to the "Settings" menu on the smartphone. Next, select the "Data transmission" section. Then click on the "Mobile network" button and turn it on if it is off. On different models of smartphones with Android OS, the settings may be slightly different, but the principle is the same - and it is intuitive.

ATTENTION. Remember that 3G Internet will work only if the transmission of data from the SIM card is enabled.

Configuring Access Point (APN)
Having completed the previous three steps, we have already come close to solving the problem. Now all that remains is to configure the APN in accordance with the communication service provider and enable it. The setting is hiding somewhere in the "Data Transfer", usually hidden under the "More" or "More" buttons on Android.

Going to the menu, which is dedicated to APN, select "New access point". You will need to include data, of which we will only fill in the "Access Point (APN)", "Username" and "Password". The rest of the fields can be left blank.

MTS: access point - internet.mts.ru, username - mts, password - mts;

Megafon: access point - megafon, username - megafon, password - megafon;

Beeline: access point - internet.beeline.ru, username - beeline, password - beeline;

TELE2: access point - internet.teleru, do not enter username and password.

The smartphone is now ready to surf the web and download files. If you still did not manage to set up 3G Internet on Android, check if the SIM card is working and if it is right in the smartphone. Accidents are not uncommon when a poorly installed SIM card turned out to be a problem with the network connection.

If you can't connect to the Internet on Android, try visiting your own website and find answers to your questions there. Often, such sites already have a section of frequently asked questions, where you may well find a solution for your specific situation.
Conclusion
Remember to turn off Data Transfer when you are not using 3G. This tip is useful for all situations, unless you have unlimited 3G internet. Android with 3G connected to it loves to update installed programs and download new ones, and this is invariably reflected in traffic. And if the traffic on the tariff has its own limit, this constant stream of updates can leave you without the Internet until the end of the day, which makes it impossible to turn on 3G when it's still noon on the street, or, even worse, slightly reduce the balance on the account.

It might be useful to read: