How to make a feeder from sticks. What can be made of sticks for sushi? Crafts and application in everyday life. Use of various boxes

For birds, you need to have some simple things and tools.

The feeder can be done with the children, but note that you need to follow each step, as in the construction process, sharp things are used - scissors, knives, screwdrivers and even sometimes, saw.

There are many options for feeders - from plywood, plastic bottle, tin cans or cardboard.

Here are the most interesting, popular and original ideas of creating a feeder:

Promotion of girlfriend: Sleeves from toilet paper

You will need:

1 sleeve from toilet paper

Peanut butter

Small bowl

Tarele

A couple of branches

Durable thread or fishing

Knife (stupid or plastic).

1. Connect two branches or sticks with each other with hot glue or rope. You can skip this item if you make 4 holes in the sleeve (see below).

2. Make holes in the sleeve from toilet paper so that you can put two branches or wands in them. It is better to make 2 holes: slightly higher and 2 slightly below (see image). This item is not required, because The bushing can be put in different way.

3. Put peanut butter in a small bowl and with the help of a plastic knife apply oil to the surface of the cardboard sleeve from toilet paper.

4. Sprinkle feed over the sleeve, incelave peanut butter.

5. Repeat steps 3 and 4 for another 4th bushings.

6. Tie a durable thread to the connected branches so that the design can be hung.

7. Hang all cardboard bushings on the design of the branches, and then hang all on the tree.

Plastic bottle feeder. Option 1.

You will need:

Any plastic bottle

Ribbon, thread or fishing line

Silo or drill (to do the holes in the bottle and plastic lid)

Bolt and nut

Stationery knife or simple (if necessary)

Deep plastic plate.

1. Prepare a plastic bottle. Remove the label from it, wash well and dry.

2. Make a hole in the middle of the lid and plastic plastic.

3. Attach the cover to the plate with a bolt and nut.

4. Make a hole at the bottom of the bottle (at the bottom).

5. Make a few holes on the side (4-5), the neck of the bottle so that the feed can get out when you turn the bottle. Holes can be made by a stationery knife if the bottle is not too dense.

6. Take the ribbon, fold it in half, and the ends tie to the knot. Grind the tape through the hole at the bottom of the bottle.

Now you can pour in a bottle feed, spin the lid and turn over. The tape will allow hanging the feeder to the branch.

Bird feeder from plastic bottle. Option 2.

You will need:

Plastic bottle

Plastic container

Durable thread or fishing

Screwdriver or nail

Knife (simple or stationery).

1. Remove the lid from the bottle and the cover from the container.

2. Put the cover from the bottle on the cover from the container (in the center) and circle the handle, felt-tip pen or pencil.

3. Use the stationery knife to cut the hole in the lid from the container. Hole can be made slightly less than the diameter of the bottle of the bottle.

4. At the edges of the lid from the container, make one hole.

5. Make a hole in the center of the cover from the bottle. The hole should be large enough to pour birds through it.

6. Put on the cover on the bottle and then insert the bottle into the cover of the cover from the container.

7. Tie a solid thread to the bottle and put on the cover on the container.

Now you can pour into a bottle feed or pour the water and hang the trough on a tree.

How to make a feeder from the box (photo instruction)

Original polymer clay feeder

You will need:

Polymer clay

Rope

Fat wire or piece of aluminum

Bowl for baking or any other dishes that can be put into the oven

Small piece of fabric.

1. First roll out the clay on a flat surface so that its thickness makes about 6 mm.

2. Gently put a rolled clay inside the bowl for baking. Cut extra parts so that the clay lay smoothly. Make in clay 3 large holes for the rope.

3. Put a bowl with clay in the oven. Carefully read the instructions for clay to know how much time you need clay for frozen in the oven.

4. When clay hardens, get it gently from the bowl, bring three pieces of ropes to her - at one end of each rope, tie a node, and the other end to impose into the hole of the clay plates.

5. Tie all the ends of the rope and secure them with the wire.

6. It is advisable to sit inside the plates a small piece of fabric so that the birds do not accidentally flush the clay along with the food.

Original pumpkin feeder do it yourself

You will need:

Small pumpkin

Wooden crossbars (can be smooth branches)

Thin wire.

1. From pumpkins you need to cut off the top.

2. Using a knife or screwdriver, make 4 holes in the pumpkin to insert branches or wooden crossbars in them. Make 2 opposite holes at one height and two other opposite slightly below - so you have one twig will be slightly higher than the other.

3. Take a thin wire and wrap it around each end of the branches so that the feeder can be hung on a tree. Connect all the ends of the wire so that the feeder can hang exactly. Tighten them into the hook.

The original idea of \u200b\u200bthe feeder for birds do it yourself

This feeder is suitable for minus temperatures.

You will need:

Large plastic bottle

Little plastic bottle or small plastic container

Scissors

Coniferous branches

Berries (optional)

Seeds

1. Cut the bottom of the big and small plastic bottle. At first you can make a hole with a knife and then cut with scissors. You will have the base of the feeder.

2. In the cut-off bottom of a large bottle, put a branch of ate of ate, berries and seeds.

3. In the center of the base, put the bottom of a small bottle or a small plastic container.

4. Push into the small container of land, sand or pebbles.

5. Tie a durable thread or fishing line to the trough so that it can be hung.

6. If you put the feeder for the night in the freezer, and then get and remove plastic parts, then the ice feeder will turn out.

How to make a feeder with your own hands using a bottle

You will need:

Small glass or plastic bottle (preferably with a lid)

Little saucer or bottom from plastic bottle

Wire

Saw (if necessary)

Screw half combine (hook).

1. With screws, connect two small pieces of plywood. In this example, plywood sizes 11 x 15 cm and 31 x 15 cm.

2. With the help of a bottle, which later attach to the stand, mark the place where you need to attach two pieces of wire - one at the neck, in the other at the bottom of the bottle.

3. The neck of the bottle must be about 3-4 cm above the basis.

4. Drill wire holes, shake through your wire, grab it a bottle and fasten the plywood from the reverse side (you can tighten the wire or secure the stapler).

5. Fill the bottle by seeds, tighten the cover to not scatter seeds, turn over and insert a bottle between the wires, and put the saucer on it and remove the lid.

6. Screw the screw half risk to the top of plywood to hang the feeder.

Original bird feeder with her own hands

You will need:

Tin Bank (preferably with a lid)

Sisal Cable (Sisal Rope) or Thick Rope

Piece of fine plywood, branches or any small metal part

Hot glue.

1. If you have a bank with a lid, then the lid must be bent in half.

2. Take a small branch, a piece of plywood or another small detail, to which birds can be sitting, and stick it to the bank.

3. Insert the bent lid as shown in the image (a little inside the jars and above the metal part), and secure it with glue.

4. Take a thick rope or rope for about 80 cm long, and start wrapping the jar so that the long ends of this rope (30 cm) remained at the end. Use glue to secure the rope on the bank.

5. Cut the rope, tie the ends on the knot and secure the glue.

You will need:

3/4 cups for bird feed

1/4 cup of water

1 Package gelatin

Twine or durable thread

Baking Forms Cookies

Baking paper.

1. Mix the gelatin with water (1/4 cups) and bring to a boil, stirring. Get the gelatin completely dissolved.

2. Remove from the fire and let cool.

3. Add 3/4 cups of bird feed. You can add more if it is fitted.

4. Put the mold for cookies on baking paper and fill them with a mixture with a stern.

5. Cut a piece of threads and make it the ends on the knot. Partially put the thread into the mixture.

6. Leave the mixture on the night to dry, periodically trying to turn over when there is time.

7. Remove the molds and hang the feed on the tree.

How to make a feeder for birds with your own hands using tin cans

You will need:

3 Paints or Canned Cans

Piece of branches or wooden stick

Hot glue

Paints (if desired).

You can paint banks, but you can leave as it is.

1. Stick a piece of the branch to the bank so that the birds can land and eat.

2. Wrap a durable thread or tape around the bank and make the ends on the knot. You can fix tape with glue to keep it better at the bank.

3. Fill in the cans with food and ready!

How to make a bird feeder from plastic bottle

In the courtyards and in the parks you can see bird feeders. If you want to construct something special, extraordinary, then we will tell how to make a feeder for birds yourself.

Easy way to give food to birds

The feeder can be made from undergraduated means, for example, take a piece of boards, plywood or anyone under hand and durable material and is higher from the ground. So food will remain affordable birds.

This is a temporary measure, as the precipitation can fall out or the feed just blows away the wind. But such a feeder can save birds from hungry death.

We use plastic bottles

From a plastic bottle, you can build both quite simple and multifunctional dining room for feathery. Consider some of the ideas of feeders in more detail, and their incarnation.

Hastily

If the bottom of the bottle is cut a hole, then we can say that we made half of the case. Near the neck need a selection of 2 holes, cover the wire and fasten the feeder on the tree or shrub branch. If you pour on the bottom of the feed, after a while you can see how the birds fly there.

In order to do not spoil food in the bottom of the moisture precipitation, the drainage holes need to be made at the bottom of the tank.

Complete design

From a plastic bottle, you can make a feeder with the "issue window". Fitting the size suitable capacity, cut a small hole on one side, and with the opposite, push the bottle with scissors. Insert a wooden spoon insert a handle forward so that it is tightly entered into the pupeled hole. A spoon should be placed so that the grains roll into it, as the birds be glued to the food. The number of spoons involved can be different, but most often there are two of them.

To hang a bottle, you can pierce a selection (or nail) a cork, to turn a drop-down thread into it, and inside the plug tie a nodule.

How to decorate a gray, unsightly bottle? If you wish, you can make a feeder with decoration of any garden.

Feeder on glass

You can make a simple design of a plastic bottle that will be attached directly to the glass with a suction cup. The device of such a feeder is very simple, and it will take only 1 capacity and 2 suction cups for its manufacture.

A construction knife is made a small square or rectangular hole. A soldering iron or a grinding nail on one side of the bottle needs to make 2 holes in which the suction heads will be tightly. In our case, the suckers were with hooks, so we first removed them, and then they secured them, inserting in our place, but already inside the bottle.

It is possible to attribute the fact that the birds can be observed, almost close to them approach. A significant disadvantage is that the birds are deforated near the feeders, so glass and the tump will have an unsightly look.

Video: manufacture of plastic bottle feeders

Using glass

Glass utensils can be used to distribute the feed of the pennate. Capacity needs to be securely secured down the neck at a short distance from any site. Pour food into this container and install in place (holding the hole with your finger so that the grains do not hurt). As feed is spent, the bottle in the bottle will enter the site.

Video: glass feeder

Other faded materials

It's not difficult to come up with a lot of ways with which you can feed birds.

Tits love not only grains. You can feed such gourmets to the branch of a slab, wrapped with a rope or wire.

If you buy products in supermarkets packaged products, then this container can also be used, embreasing nuts there.

From the fine bulk feed, you can make a ball (adding flour and water) and also suspend in the grid. In frosty weather, food can be mixed with vegetable oil. Milk or sour cream is not suitable for these purposes, since the bird's body does not accept such food.

In order to protect feed from precipitation, you can build a roof from plywood.

Pumpkin

Pumpkin feeder can be called wasteless production, since the birds first eat food, and then the edible "dining room" itself. In the pumpkin it is enough to cut holes and pull out the core.

You can cut a pumpkin in half, to turn the rope with the knot tied bottom through both halves. To fix it in a disconnected state, between the halves you need to set the struts from the twigs. In the extreme case, you can use pencils as stands. The upper edge of the rope, which will be done through the pumpkin, is tied to the branch, and the feeder is ready for reception of the feathers.

Video: Pumpkin feeder

Spring from sofa

There may be things and objects that usually apply nowhere else.

If you have a spring from the old sofa, it can also be used, clinging between the turns of the slices of bread. Such a feeder can be suspended both in the vertical and horizontal position.

Air filter car

The feeder from the metal grid can be seen on the counter of the store, but such a design can be built from the car's paper air filter served.

For the manufacture, you need to cut off the upper part of the filter, and remove the paper stuffing (you can, together with the inner or outer mesh, if you do not plan to fall asleep between them). Outside the filter, to the top of the mesh, the wire is tied, which will serve as a loop for hanging the feeder to the tree. The appropriate feed is poured inside, and the cut-off top of the filter can be used as a lid.

To reduce feed losses, it is possible to glue the cover from the plastic bucket to the bottom of the feeder. From the same lid can be made canopy.

Tea for welding

If you have an old kettle and throw it a pity, and it is already impossible to use it, then you can make a feeder from it. How to hang it? Drill a hole in the faience product - the case is very ungrateful, so you can use the thermoclaim. If there is a hole in the lid, then it needs to push the ends of the rope and make inside the nodule. For the suspension it is better to bind a small washer. Now the lid can be glued to the chairs whose neck will now serve as an entrance for birds.

Looking into a barn or storage room, you can find things that are "hard to carry, but sorry to quit." To the category there are old metal bread box. Large fantasy for its placement is not required - tied the rope and hung on the branch.

In a similar way, an unnecessary plastic container can be used.

Use of various boxes

It will also be easy to make a feeder from the box from juice or wine.

In the box, one or two windows are cut with such a calculation so that the bottom there is a small bowl for feed.

When cutting the window, you can take care of protecting feed from precipitation. For this, a small visor is left for that, but so that it does not fall and closed the input, it can be fixed in the open position.

For the manufacture of a large-sized feeder from cardboard, a large box will be required. The desired size window is cut in the construction knife or scissors. If the box is very big, then you can carve a smaller product and wrap a scotch. It is important to realize that such a feeder will only last until the first rain.

Box of tin

Often manufacturers sell products in tin boxes, which can also be used to make a feeder.

In addition to the bank itself, we will need:

metal or plastic chain - 2 m (4 segments of 0.5 m);
detachable ring (used for keys);
small pin - 8 pcs. (you can do knitting wire);
awl;
alcohol marker;
nippers or scissors for metal;
line;
pliers.

Now proceed to the manufacture.

You need to mark 4 points on the bank 4 points and transfer the same tags to the lid.
By seammers, it is necessary to make holes to make a pin in them.

Floors cut the chain into four pieces of 50 cm.
Take a pinch through the extreme chain link, we insert it into the hole and from the inside the cans of the pliers push its ends.

Having measured 15 cm chains (ranging from the can), we sell the remaining 4 pin in it and secure the lid.
Now in the ears of the free ends of the chain we sell the detachable ring.

Hanging the feeder on the branch, look, in which direction there is a bonfish slope, and in the bottom (from the inside), pour it with a selection - it will be a drain hole.

Things

From large branches, you can collect an original feeder. To fulfill the work, you will need an ax, hammer, nails and a little fantasy.

Plywood

Plywood products are quite strong, but moisture is afraid.

A simple variant of the feeder consists of all of the pallet with sides, two pieces of plywood, serving as a roof, and a rope connecting all parts. To fix the bottom and roof in the desired position, nodules are tied on the rope.

If there is a desire and electrolovka, then you can construct a more complex feeder using one of the drawings presented.

Log

During the harvesting of firewood there are lamps with a drowler core. This piece of trunk will serve as a basis. Need to remove the core. In the floor, the windows are drilled or its longitudinal part is cut. The ends are closed with selected "plaques", paved from other trunks. The trough from the tree trunk can be found both in horizontal and vertical execution.

For the manufacture you will need:

self-tapping screw;
small nails;
rake.

For the manufacture of the roof and the bottom, you can use plastic or LDVP (what will be found, as this material is sold only by large sheets).

In the manufacture of any design, it is convenient and practical to use the drawings in which the dimensions of the parts are indicated. We also use the drawing in order to cut all blanks into the size.

They can be slightly treated with emery skirt.

First, we collect a narrower part of the future feeder, scoring on each side of 3 nails.

Then the entire frame is collected in the same way. If nails are short, then you can use 5 pcs.

I will install the frame for the prepared bottom and outside the pencil - we will get the markup, which will need to cut this item, and then nail.

In order to fix the upper rails, we use 4 screws - 1pc. For each point of attachment.

From the remaining rails we will make the upper part of the feeder, covering the details by self-draws. The final step will be marked, drinking and fixing the roof. The joint of the two sheets of the roof cover can be hidden, having a rail-corner from above.

There are some points that need to be taken into account when making and determining the place of installation of the feeder:

It is impossible to underestimate cats, because they can get to the feeders, and then the birds will fly away or become a prey of home predator.
The feeder needs to be done with a big roof, then a lot of precipitation will not fall into it.
The entrance to the feeder should not be small, as the fear can be stronger than hunger, and the birds may not benefit your hospitality.
The design is better made from moisture-proof material, then it will last long. Other materials need to be treated with water-repellent compositions.
If the feeder is too easy or has a large sailboat, then it can be inverted upside down. Even short-term turning will lead to the fact that the whole feed will be on Earth. Light design need to be dragged.

Photos of original feeders

Video: Original ideas embodied

Drawings and sketches

Birds living in wildlife need protection and care. It is especially difficult for them during the winter: when frost on the street it is so hard to find shelter and food.

That is why there are no equilibrium people try to feed our younger "fellow". One of the ways that will make not only help feathery, but also to decorate your garden, is a feeder of girlfriend.

In this article, we have collected several most accessible options - focusing on descriptions and photos using already unnecessary items (plastic bottles or old dishes), you can easily equip the place where bird packs will be collected.

Selection of material

Assessing your resources you have to create a feeder, you can choose the idea of \u200b\u200bthe soul. However, it is necessary to remember that not only its appearance depends on the configuration, but such practical characteristics as stability.

That is why a good feeder must comply with the following requirements:

Wear resistance and durability. Preference should be given to a tree or plastic, which are able to resist weather conditions, not splashing from rain and snow, not destroying under the gusts of the wind.

In addition, the feathers themselves are often the cause of damage to the feeders - in search of crumbs of their beaks and claws scratch and tear fragile materials.

Due size. Remember that if you cut a small feeder, for example, from a tetrapak, then large birds will not be able to eat out of it, and small ones will climb fights for the place and shake food to the ground.

Lack of sharp edges, "crawling" carnations, etc. Birds are very gentle creatures, their feathery protection and legs on the paws cannot prevent cuts about pointed items, so take care that your feeder is not dangerous for them, especially if it is made of their glass, plastic or shave out of skimps!

Location and installation

The right choice of place is an extremely important point!

Featuring the most appropriate position from the point of view of landscape design, rate:

Availability for birds. Perhaps the feeder will be closed from them with thick branches, or, on the contrary, it is too open, and then, with strong wind, the feathers simply will not be able to get to it.

Inaccessibility for cats. These animals are beautiful hunters, especially those who live in villages and country villages. They are stronger, faster and tracked their home fellows, and therefore, having applied to the trough, they can cause a big damage to the bird community.

Ideas for creating feeders do it yourself

There is a huge number of different types of feeders - it all depends only on your imagination and existing materials.

We will try to consider as the simplest and most original ideas.

Tree or plywood house

Despite the seeming complexity, this design may well be assembled in the presence of unnecessary boards, woods, strokes, plywood and, of course, special glue or nails.

Note!

There should be a heavy smooth plank. For the manufacture of walls and roof you may need a drawing, however, it is quite possible to do and the eye meter.

Wooden feeder, depending on how much attention you pay it, can become not only a place for feeding birds, but also the elegant decoration of your garden.

Plastic bottle feeder

This type of feeding bag is made very easily and perfectly suitable if you decide to attract children to the process. You need to cut out one or two holes in the bottle in such a way that it was possible not only to pour food, but also access to it was not difficult.

Of course, it is worth trying so that cut edges come out neat and not too acute (in addition, it is advisable to shock them with a scotch).

If you use a small bottle (1.5-2 liters), then you can enroll in two ways: cut in a square or rectangular hole in a bottle or prefer the P-shaped form so that there is an opportunity to break a piece of plastic and make a visor.

In the event that you decide to apply a large bottle (5-6 liters in which drinking water is usually sold), you can make a large side cut. So it will be possible not only to fall asleep more feed, but also give the poultry space for maneuver.

Note!

In order for the wind does not flutter a light bottle, it is worth putting a stone or a fragment of a brick on the bottom. This applies to the next type of feeders.

Tetrapka bird feeder

In order to make a feeder for birds, you can use boxes from under juice or wine.

To do this, follow the same technology as in the previous case: we plan a section of the cut, cut out in shape, glue to the bottom of the scotch (or leucoplasty) opening, then we make holes for a solid rope at the top of the tetra Pokka. It remains to hang the feeder in the place you have chosen.

Fit from shoe boxes

The cardboard, from which a shoe box is made, cannot be considered a durable material, but it is sufficiently resistant to moisture, and if on the street of frost, such a feeder can be saved until spring.

The machine manufacturing technology, as in previous cases, is also very simple: to make four or six holes for the rope, slots on the sides and put the loader to the bottom - for stability.

Note!

Other options

The above options are extremely popular - such feeders can be found on any dacha. If you want to make a unique feeder with your own hands, it is worth taking unusual materials, for example, an old table dishes: a cup and a saucer.

In the autumn period, you can cut the product from a pumpkin or zucchini, in the winter for this, sulfice of the orange sinks are suitable. Such feeders will surprise your neighbors and will undoubtedly decorate the garden!

Stock Foto Feathers for birds do it yourself

Wild animals and birds that live in nature cannot count on the fact that in winter someone will help them in the same way as their domesticated "fellow". Nevertheless, many people understand this and try to provide all-in-cold assistance during the winter cold.

Benefit and to you and pen

Thoughtful people understand well how difficult it is for the brothers of our smaller, since already starting with late autumn, many of them are increasingly harder to find food. Of course, with all the desire it is not so about just to help those of them who live in the forest or in a remote area. However, if you live in the city, the village or village, then everything is in your power. Today we will talk about bird feeders. It is quite real to make them, and we are talking about the use of submitted means, old packaging and containers, as well as other materials that, in any case, most likely, would be thrown into a landfill.

By the way, "accusing" birds in his feeder, located on the plot, in addition to the feeling that you are assisting them, saving from hunger in a difficult year of year, you get a kind of additional "bonuses":

Birds will be accustomed to your site and begin to dwell on him more often and next to him. Thus, they will constantly delight you with their games, bustle and twitter, filling the surrounding space of vital energy.
It is quite often this happens that in the summer the feathers return the peculiar debt to you, destroying numerous insects and pests that live in almost every garden or garden.

Wood - reliable material!

In today's article we presented a photo of many options that will help with the ideas of how to make a feeder for birds with your own hands. As a rule, in order to implement a project of such a feeder, you will not need complex projects and drawings.

Attention! You can feed birds not only in winter, but in the summer, especially if you live in the country or in a private house.

Before considering the main ideas of making feeders, let's talk about some features of the choice of material, as well as about places where you can suspend or attach such homemade design.

Selection of material and places for installation

Before you choose a seat for feeders, it will be very useful to learn the most common types of birds that live in our latitudes.

1. Fresh; 2. Food; 3. Small motley woodpecker; 4. Clest; 5. Coyake; 6. Cederation or nuts; 7. Snegir; 8. Slistrel; 9. Ordinary Dubonos; 10. Schegol; 11. Chizh; 12. Oatmeal ordinary; 13. Growstone; 14. Big tit; 15. Scenic-Ladzoevka; 16. Crested Tit; 17. Title-Moscow; 18. Long-tailed tit; 19. Sinit-Haiga.

Traditionally, it is believed that the bird feeder should have the shape of a kind of house, which would be somewhat similar to the birdhouse. And in fact, such a configuration is optimal in order to organize a place there for feeding the feathery. Consider the benefits of such a form:

The roof allows you to create protection against rain and snow.
This design made from plywood or wood is durable, durable and reliable.
She will not look alien, since we are talking about the landscape design and the external attractiveness of the entire site.

However, it is not necessary to be limited only to such a form, as well as the fact that exclusively wood can be used as a material. In fact, the configuration, and the material can be absolutely different.

The main thing is that the feeder meets the basic requirements:

The material from which the feeder is being made should be stable and not deformed over time. In other words, the birdhouse from the cardboard or similar to him of the remedies is not suitable. He simply will not stand sophisticated weather conditions: rain, wet snow, etc.
At the same time, you can, in the extreme case, make a small feeder from packaging from under juice or dairy products (kefir, milk, etc.). Tetra Pak and a similar cardboard packaging in a much greater extent compared to an ordinary cardboard, adapted to the effect on it moisture. However, such structures cannot be attributed to durable. On the other hand, they will fully rise as a temporary solution, which, with favorable circumstances, can serve you throughout the whole season. At the same time, it is necessary to understand that the feeder from the package from the milk will be used only for small birds, since they simply do not fit large in it.
From the previous point, by the way, the following conclusion follows: the material should be durable and stable, since it must withstand not only the autumn-winter bad weather, but also the weight of the feathers themselves, some of which are quite massive. At the same time, we care that the wear will occur, among other things, because of the constant impact of their claws, since they will, as a rule, be sitting into the cut out of the opening ("window").
By the way, since we started talking about the window, the entrance (this technological opening can be called, in fact, anyhow), then you need to understand that its edges should not be sharp, because, otherwise, birds can face their paws.

Location

In addition to the material, as well as manufacturing technology, it is necessary to understand that the place in which you install or suspend the bird feeders is also an important point. So, if possible, it is necessary to avoid installation in those places in which the feathers will have difficulties with access. It is about thick branches and other similar places.

In addition, attach attention to the fact that the feeder is located in a place is difficult to reach for cats, which are known to be beautiful hunters, in a large number of villages in villages, as well as in cottages and private building arrays.

Tip! Position the feeder in the open space, in places, well visible to birds.

Popular ideas

Let's look at the main ideas of how it is better to make a bird feeder with your own hands, looking at the "living" examples how many people implemented their projects. The feeders can be a lot, and the options for their manufacture - countless. However, all of them are made for one purpose. So, here are the main types of designs of this kind.

Dispenser is a very useful device for feeding birds. In addition, the bottle can be suspended vertically "upside down"

House of wood

Make this design is quite real and independently. No need to have some specific skills or knowledge. As a rule, with such works, workfield or unnecessary boards, slices of logs and many other wooden elements are used. Taking the base of the table or veneer, the main task is their strong connection.

By the way, wooden bird feeders can be used not only for feeding yard feathers. Similar structures are used in chicken copies, when feeding chickens and other poultry. However, this is already the story, a completely different story.

Feeding from plywood

This design can be made with your own hands right at home. To do this, you will not need any special tools or conditions. At the same time, by itself, you will have to find the drawings of the feeders. On the other hand, the drawing with dimensions can be done both, since nothing particularly difficult in its development is not. For more ideas, we recommend reading the photo and examples of finished work.

Bunker feeder

This type of construction, if you can say so to speak, "swinging" from agriculture. One of his main advantages is that it allows you to eliminate the "discrimination" of some bird species. You yourself probably noticed that a flock of one birds, for example, Sparrow or Sinitz, occupies a profitable position in the immediate vicinity of feed (seeds, bread crumbs, grains, croup, bault, etc.) or even in the feeder itself and seeks Prevent other birds to such a valuable resource.

Therefore, an important task is to limit the area where feathers can be fed. Therefore, in such cases, homemade bunker feeders can be useful, both anti-bias are also known.

Plastic bottle feeders

Cutter feeder - also an excellent option

This type of construction is extremely simple, so everyone can make it independently, including children. In order to make it, you will need only cut one or two holes in a bottle in order to pour into the bird food inside, and in fact, in order for the feathery to be able to fall inside. Of course, at the same time you need to be attentive, because the holes should be, if possible, as smooth and symmetrical as possible.

Interesting! If you have time and desire, the feeder can additionally decorate with natural materials, or apply inscriptions.

Let us consider in more detail the features of the work in the presence of bottles of different volumes. The fact is that the most frequent source materials in such cases are:

So, if you use the first option, you can also choose from two types of designs. In the first case, we are talking about to make holes in both sides of the bottle. They can have a different form: round, rectangular or square.

In the second case, a special visor can be made, which would cover a hole, protecting it from snow. In order to make it, you sufficiently cut through the P-shaped hole, leaving one side (upper). After that, this section of the bottle is bended upstairs, thus forming a kind of visor. This, by the way, can also be made on both sides.

For greater convenience of birds, you can do two small holes under the main openings and insert a long wand into them, to which they could sit before getting inside. As for the lower edge of the main holes, it is desirable to sample with a tape or a tape into several layers for greater safety. Also suitable tissue adhesoplasty. Thus, the feeder is made with their own hands from a plastic container with a relatively small volume.

It is even easier to make a 5-liter bottle feeder. The fact is that the walls are often straight, which allows you to cut a faster hole. Plus, more seeds and crumbling baton are placed in such a container, and the birds are more convenient to fly inside. For the manufacture you will need a knife or durable scissors.

If the plastic bottle is fastened horizontally, the holes can be cut on the place of the bottom and neck. If you plan to fix it vertically, you can cut through 2, 3 or even 4 holes from different sides if you work with a bottle having a square or rectangular cross section. This, by the way, will allow simultaneously to fly and eat at once several birds. For round bottles, you can cut 2-3 holes. By the way, on the basis of a large bottle of 5 l and above, you can also make a bunker feeder.

On a note! Holes are preferably cut at an altitude at least 5 centimeter from the bottom, you can slightly more.

Such a trough is attached simple enough: you can bind it either for the neck, or by the handle, which is an integral part of the cover using twine or thin wire. This is if we talk about vertical options. With the horizontal fixation, it is best to do 2 parallel small holes (they can be made using a knife or other acute item), passing the wire or rope through them, which is necessary for fastening.

In any case, this option is very available, since almost everyone has unnecessary 5-liter bottles from water. Photo examples show various options for how it can be done.

Bird feeder from a package from milk or juice

5 minutes - and a new feeder from the package from juice - ready

Boxes from under juice or milk are available from everyone. We, as a rule, throw them out. Manufacturing technology is extremely simple, and in some way resembles the previous (with plastic bottles). So, if you want to make a feeder for birds from a package from juice or milk, the sequence of your actions may be as follows:

We plan future holes using a handle, a marker or felt-tip pen.
Gently cut them out, using scissors or a sharp knife.
Purchase the bottom side of the opening of a scotch tape or a leukoplasty.
Make small holes for rope or wire at the top of the package.
Let the resulting feeder to the tree branch, lilac or to other places.

The easiest and fast option from the package from milk

By the way, in some cases you can put on the bottom or attach a ship in the form of a fragment of a brick or something like that. This will minimize swaying in the event of a strong wind. This applies not only to paper boxes, but also plastic bottles.

Remember! In some cases, you can attach the feeder and to the wall.

We use a box from shoes

By the way, the bird feeder is made in the same way from under shoes. Of course, the fact that it is made of cardboard does not allow to make such a durable feeder. On the other hand, part of the boxes are made of sufficiently strong and resistant to moisture cardboard. Moreover, you can additionally attach a cardboard with a scotch, which will further increase its protection against the impact of bad weather conditions. This will allow to some extent to increase the life of the feeder, although, in any case, it will not be as long as its counterparts, cardboard and even plastic.

The technology of manufacturing in itself is extremely simple and does not require any special instructions. You just need to make the necessary slots on the sides of the box, and also fix the lid. It can also be done with a scotch.

Other options

Of course, all these types of feeders are the most common and popular. Nevertheless, it makes sense to tell and about alternative options. The first of them is a feeder made from the dining room.

By the way! From the dishes can be made and drinking, which is also very important for birds.

These original products made of cup and saucer are made. If you add a deep plate, you can make a feeder at the same time, and drinking. Some craftsmen make feeders from the old buckets, as a rule, plastic. They are obtained big that somewhat limits the possibilities of their installation, which, of course, is a certain disadvantage. The advantage is the same: the size of such a product is large enough. This allows you to pour more feed, in addition, several birds can be fed at the same time. We must not forget about the strength of such a design.

The bird feeder has long become something big than just a device for feeding them. We admit that we want not only to ease the life of Pernavi, but also to watch the behavior of wonderful birds, decorate their yard, to realize in front of others and teach their children to love this world. If at the same time our wards will help in protecting the garden from pests, it turns out quite well.

Bird feeders: What should they be?

Tallowing facial production, it is useful to remember the remark of Exupery: We are responsible for those who have tamed.

In other words, escyeing the birds to the easy prey for food, we must think about them all winter.

Otherwise, they will experience big problems, having lost their feed overnight, and can even die. Now list a number of characteristics that must match the bird's dining room:

bird table should have flights that will not give the wind to carry food;
the exercise should not have sharp edges, which the feathers can face legs;
the roof over the table will protect me from rain and snow;
the feeder should be, if possible, is not available for cats;
holes in the walls of the crafts must have sufficient size so that the birds are not afraid of the closed space;
the product should be moisture resistant to listen not less than one season;
the exercise should not be very swinging in the wind, that is, it is better to drag a piece of linoleum or pebbles.

This feeder does not like the birds

Feeders for birds: what are they?

Those who wish to make an exclusive bird table so much that they composed the innumerable amount of their own works. Obviously, preferences and opportunities are different. We intend to offer you a number of different products describing their features and designs. Of course, we will align and wishes actually birds. After folding all together, you will get the opportunity to compose your own "symphony" called "bird feeders".

From wood - most options

The picture shows feeders made of dusts. Depending on the preferences and availability of the material, you can choose something or another. At the very first option there is a raisin: a gap on the side plank for flowing water. Any product will serve longer if it is handled by impregnation, paint and coat with varnish.

These products are slightly harder - all of them are made of bars and rails. Such material allows you to make quite interesting and exclusive options. Pieces of rubberoid on the roof will noticeably increase the durability of the crafts. Lands and specks can be mounted with small nails or glue.

Using tree branches bring your craft to nature. The product can be quite simple and unusual. The use of impregnation and varnish and in this case it is advisable.

Very interesting looks of birch branches. If there is such a material, I would choose this particular option. Various ways of performing the roof are possible. Bark bark is already in themselves protective functions, but the varnish does not hurt.

The photo presents several feeders for mounting on the wall or to the tree trunk. They all have a back plank with a hole for fasteners. You can independently make various options for complexity. Very simple and easy to use the feeder with a glass jar.

The photo presents amazingly simple and original structures from wood. Such feeders are quite realistic to make himself. Processing with protective impregnation went to them.

Carved products make up considerable opportunities. However, without a jigsaw in this case, it is difficult to do. A piece of galvanized on the roof is correct. Special color products will give the treatment with a soldering lamp. Protect from moisture product to which spent a lot of time is simply necessary.

In the image above, products made by professionals are selected. All feed parts were first processed and painted, and then collected in a single design. As a result, we have impeccable appearance and durability. Nothing prevents the same thing to repeat the same thing!

The photo shows the feeders who will decorate with their presence a mansion of any level. Probably such products make specialists in the workshop. I am sure if you specify the goal, repeat the elite option is quite possible.

In the photo at the top we picked up the most interesting ideas of wood feeders. They are different based on materials and execution. In this case, such products are quite realistic to make themselves.

From plywood - their own features and opportunities

Before you, several designs of plywood feeders. Many products made by this technology are quite a lot. Details of such feeders are cut on the machine and sold in stores in the form of sets. Crafts are going to easily and quickly. A set from the store is interesting and useful to process and paint on your taste.

These products are made in a workshop of thick plywood. The designs are assembled from simple parts and actually repeat them in the presence of a jigsaw. Clean plywood clearly requires coating and decorations.

The feeder from plywood is noticeably easier to make with the use of bars and rails. In this case, you can do without jigsaw.Presented in the picture of the structures are different, but simple.

Plywood feeders with the use of wood are quite popular. We demonstrate a few possible options. The simplicity of execution cannot create barriers to exclusive options, if creative people are taken for business.

The picture above presents evidence of the effectiveness of the use of paints in the manufacture of a feeder. In the hands of craftsmen, pretty simple products are easily converted into fabulous attributes. In this case, the desire is more important than the deputy artist.

Especially for those who wish to make a feeder from plywood and bars, we have prepared drawings of the product. All items for convenience are numbered. For the assembly of the feeder, a plywood is 4mm thick, a bar in cross section 20x20mm and wood screws.

Before you drawing the details of the feeder. The number of the latter is given in the table. 20x20 bar section in the drawing is not given.

From bottles - simple and reliable

Very often bird feeders make plastic bottles. This is explained by the availability and durability of the priest, the ease of manufacture. Transparent plastic bottles allow you to freely observe the behavior of the feathers.

Sharp edges of plastic need to be treated with tape or cut along PVC tube. Then the birds do not embrace foot and plumage. Light feeders from bottles should be pulled by pieces of linoleum or pebbles, so as not to swing in the wind. The image above presents the simplest options.

Capacities from under car liquids allow you to obtain more reliable and volumetric designs. Unfortunately, they are not transparent. In the feeders from any plastic containers should be done in the bottom of small holes for the flow of water.

Five-liter eggplants can be decorated beyond recognition. Skip, twine, rocked and small twigs. So that beauty does not fade quickly, it is necessary to use moisture-resistant techniques and glue.

As you can see, options for decorating feeder feeders from five-liter bottles. Categories fantasy and make your own and unique. Do not forget about the reliability of the design.

In the photo at the top there are still several characteristic methods of using plastic bottles:

In the first picture in the bottle, two holes opposite each other closer to the neck. In the holes inserted a wand - found. Just below, the nester was trained for feed. It should have optimal dimensions: seeds do not wake up, but the bird is available. Then fed food, turned the capacitance upside down and secured the wood.
In the following image, the role of dispensers and the natives perform two tops of the bottles, tightly inserted with tights into the holes on the sidewalls of the main bottle. The lower edges of the specified parts are bent and wrapped inwards so that the birds do not parse.
The picture on the left below demonstrates the possibility of using paints. A simple design made with taste will revive the technical transparency of plastic.
The presence of wooden spoons helps call birds to dinner. They are simply fought through the holes in the bottle. It is better to place spoons at an angle to destroy two poker at once. Holes for feed over a spoon should not be overwhelming, so that the latter does not pour out all right away.

From cardboard and packages - cheap and angry

Feeders for birds from cardboard and cardboard boxes are the most unreliable. But you can make a large feeder and decorate at your discretion. You can increase the service life of the canteen for birds from cardboard, covering it with a tape or film.

Packages from dairy products and juices are a good means for making feeders. They do not stand and have good moisture resistance. Of course, the bottles are more durable, but it is easier to work with packages. Before you several versions.

We decided to make a cheerful and simple feeder from a two-liter package from juice. There was an idea to feed the birds in an improvised bus. Master class on the build crafts is quite simple:

Unusual - bunker, transparent, designer, with joke

Of particular interest to us are bunker feeders, which provide automatic feed feed as it is spent. Thus, bird food is not worn by the wind, and we do not need to constantly monitor the presence of grain. The design of such a feeder can be the most different, but the essence is one everywhere: through the hole of a certain size, the feed rushes from above and replenishes the bird table.

In the examples given as a dispenser acts:

gap between two glasses;
narrow neck glass bottle;
holes at the bottom of the plastic bottle.

Similar options, we have already considered in the description of the feeders from plastic bottles. Relying on these principles, for sure, you can come up with something new.

Feeders using plexiglas look elegant. Birds and food are visible great. The designer approach raises a desire to repeat a successful experiment.

The remains of a tea service do not want to throw away at all. Before you are four options for using dishes as a feeder. Moisture resistance and the appearance of the material do not cause doubts. Fasten a cup or kettle in the garden does not represent complexity.

Particularly stubborn and talented homemade workers compose merry feeders - jokes. It is necessary to gain determination to repeat the best examples. It is especially nice to compose something your own.

To begin with, you can try the option easier from plastic bottles. Much depends on your girlfriend you have. The above examples are quite subject to feminine hands.

Before you are four options for the "male" cool trough from a tree. The design of the craft is quite obvious. The repetition of the proposed ideas is quite the real task.

We present images of several other options for unusual bird feeders. The main idea is obvious: do not be afraid to experiment. It is easier - not to torment yourself from exactly the same materials, but to use the available.

Making a feeder - a snowman made of plastic bottle

Of course, I want to make the bird feeder simpler and more interesting. As it seems to us, a snowman with gifts from Santa Claus for birds is a suitable option. Master class of making crafts Next:

On one side of the bottle, placing a snowman's mouth marker. Now this wall will be face. Slap the outlines of the mouth on the markup. Filing the resulting language down 90 degrees.
On the side, place your ear in the form of an inclined oval, narrowed down. Cut the hole imitating the ear.
The resulting piece of plastic apply on the other hand and supply the marker. Cut the second ear.
We place a large rectangular hole on the back of the head and cut it out.
It turned out a blank, as in the photo at the top.
Pray the snowman cap is as blue as the bottle cap. The bottom of the eggplant is painting white paint.
Praying the tongue of red paint.
On the edges of all holes we wear a plastic corrugated tube with a diameter of 16mm. In the store of electrical goods 2m such pipes will cost at all. The tube is pre-cut along along the entire length.
For weighting of the container, we use linoleum. We put the container on it and get the marker. Such details are better cut two.
We prepare traffic jams, self-tapping screws, cover from sealant and wand in accordance with the pattern. In corks, we do the holes for screws. In the red cork we make a hole under the wand.
We do two holes to install the nose stick. One break through the place of the nose, the other on the back of the head. Insert the wand in them. I put on it first the red plug, and then the cover from the sealant. It turned out the nose of a snowman.
Eyes collected from small white and large blue caps. We screw them into place by self-draws. From the inside the protruding screws rush two more covers for the reliability of the attachment of the eyes and protection against sharp screws. All is ready!

Master class making classic feeder

At school younger son pushed to the manufacture of a feeder for birds. As materials were discovered:

painted galvanized corner 50x50mm;
wooden rail with a cross section of 20x40mm;
a piece of plywood 4mm thick.

What was decided to compose your work. The master class sequence is as follows:

Bird grain cookies

Sometimes you can do without creating a feeder to help feathers. On the branches of trees you can spend a special bird cookies. Note, biscuits for birds from grains looks so seductive that he himself would eat.

The first method of manufacturing a delicacy is as follows:

cooking molds for cookie cookie;
we put in the molding pieces of twine, which will serve suspension;
we dissolve gelatin in warm water;
we fall asleep into the cooked solution of grain feed;
pour the mixture into cooked forms;
we place food for pouring into the refrigerator;
finished cookies hang on the branches of a tree: Available for our eyes and inaccessible for cats.

In the absence of forms, beautiful food for feathered can be made differently:

cut from cardboard figures of various shapes;
in cardboard blanks, we do the holes, we produce twine and tie the rings for fastening on the tree;
for fastening the feed to the cardboard, we prepare special glue, which consists of eggs, spoons of honey, 2 spoons of oat cereals and flour;
mix mix and leave for ripening for half an hour;
as glue is ready, we lubricate them with cardons and collapse the latter in bird stern;
we send a semi-finished product into a frodder refrigerator;
as cookies are ready, hang it on the tree, and we go to the window yourself - watch.

Food for birds: "What is good and what is bad"?

Look carefully on the birds that remained wintering in our area. In their eyes, the hope was frozen, that we will not suck the "overdue product" or harmful food for them, from which the feathers will suffer. Let's remember than our wards treat it impossible, which should never be included in their diet:

salted, as well as fried seeds;
cream cakes and cake;
fresh white bread;
rye bread;
nuts;
crisps;
oat flakes;
remnants of bananas and other citrus
fresh fruits.

Fortunately, the range of possible is noticeably wider. Pernaya can offer:

bread crumbs;
sunflower seeds, pumpkins and watermelons;
cereals: oats, wheat, millet, barley;
rice, buckwheat;
sobbed fat specifically for cinemas;
kalina and Ryabina, maple seeds and ash specially for bullfding.

The egg shell, major sand, the pushed chalk will serve the seasoning to the bird dinner, especially during the construction of the nests. Thus, we know almost all about feeders and bird stern. By the way, in the spring and summer to observe the behavior of the feathers no less exciting than in winter. We wish you good luck and offer a video to help.

(7 Rate on 4,00 of 5 )

Perhaps it will be useful to read: