Plasticine bat. How to mold a plasticine bat step by step with a photo. Step-by-step photo lesson

Print Thanks, great lesson +1

The Halloween holiday implies the obligatory decoration of your home with various paraphernalia: pumpkins, ghosts, witch hats, dragons, spiders and bats. Today you can learn how to do the last decoration option with your own hands and it does not take much time. This lesson presents a classic version of the craft in the form of a volumetric figure, but you can experiment and come up with your own original version.


  • Black and white double-sided paper
  • Stationery glue
  • Stapler
  • Scissors
  • Black marker
  • Pencil

Step-by-step photo lesson:

We will make the body of the bat out of a small rectangular sheet cut out of black paper. The size can be any. In our case, it is 16 x 6 cm.


We connect a sheet of paper into a tube. We fix the shape with a stapler in places where the edges overlap.


We carefully bend the front and back walls in the upper part. The sides will turn into little bat ears.


We will do the same with the bottom side.


Draw the wings of a bat on double-sided black paper.


Apply clerical glue to the center of the wings.


Attach the bat body blank to the wings. We give a little time for the two pieces to stick together.


Let's make big eyes for our bat out of white paper. Add a black marker to the pupils in each circle.


We glue the finished eyes in the form of two white circles on the front of the body.


So the paper bat is ready for Halloween. You can not only play with such a craft, but also decorate your home with such figures for the autumn holiday.


It can be relevant on the eve of Halloween, or just be a great excuse to work with soft mass. All the work can be done in several stages, using only one color of plasticine, read the details below.

1. A black or gray block is suitable for creating a bat. It is this color that the coat and wings of this animal should be. Although it is never possible to consider the details of the appearance of a brisk baby, images of a representative of the fauna are easy to find on the Internet. Mice always fly out to hunt in the dark, people can only contemplate their silhouettes.

2. Form a ball and an elliptical part. These are the main parts from which the head and body will be produced in the future. Leave the third part of the clay right away to create the wings.

3. Connect the head and body by pressing firmly on the plasticine, but being careful not to deform the workpieces.

4. Knead the soft black mass in your hands and, pressing against the board, make a flat canvas. Spread the clay evenly in a thin layer. Then, in a stack, cut out the wings of a bat with membranes in a characteristic manner. Focus on the photo.

5. Attach the wings to one side of the torso, taking it for the back.

6. On the face, create two glowing eyes. To do this, cut out a stack of cracks and insert yellow plasticine into them. Attach the ears-horns to the top of the head.

7. Add the nose. And on the inside of the wings, draw the membranes in a stack.

8. Two more small details - legs. It is also better to make them from black plasticine and add three fingers each.

9. Attach the legs to the craft.

The bat can now fly under cover of night, but you should not be afraid of it, because our craft is made of plasticine.

In the form of a bat. She will be black, harsh. It is advisable to lower it upside down, this is how these nocturnal "swallows" live under roofs and in caves.

Have you ever managed to get a close look at the shape of a bat? These animals fly over our head, as soon as it gets dark outside, we are even afraid of them, because we are afraid of everything that is associated with darkness and uncertainty. Of course, it is almost impossible to see this nimble night robber at night.

We even think, sometimes, whether it was the swallows that stayed late in the sky. And if we are talking about celebrating the day of evil spirits, then the image of a bat takes on a completely different sound. You can sew such a suit for yourself, make crafts with your children, or decorate the interior with details that imitate black wings with membranes, piercing eyes, and so on.

To sculpt a bat, prepare:

  • black plasticine;
  • stack;
  • a drop of white plasticine.

How to mold a bat with your own hands?

For sculpting the chosen craft, black plasticine is best suited, because we are talking about a bat - small, black and flying.

This block, for sure, remains in your kit after children's needlework, so it's time to use it in October. To add a touch of flavor to the craft, paint a skull on your chest - this will add zest, the craft will become creepy.

Divide the center block proportionally and knead separately the parts for sculpting the head, torso, wings and legs.

Now proceed to deform the prepared parts. Sharpen the head, which used to be a simple ball, from below, and also show two ears in the form of a horn at the top of the head. Pull out the torso (a slightly larger ball) and sharpen it from below, pulling out the plasticine with your fingers. Fasten the head and torso first.

Now make the wings. And this is a more complex modeling job. Make thin cakes, round and smooth at the top, make sharp protrusions at the bottom.

You can do the work with just your fingers or help yourself with a stack by cutting the clay in some places. Also draw the webbing.

Glue two absolutely identical wings on the sides. Press down on the clay while it is still soft.

Make eyes and a mouth on the head. Roll up small white balls, glue them end-to-end in the center and add pupils. Also cut out the mouth, you can lower the corners down. But while the mouse looks somehow strange, it is not scary at all.

Stick on frowning eyebrows - the look will instantly transform, you get the result you need. From the remaining piece of plasticine, make 2 legs.

Pull the mass into the spatulas, cut 3 fingers at the ends with a stack and bend them in the form of a chicken leg.

Glue the two legs at the bottom of the torso. Be sure to turn your figurine upside down.

Now make an image of the skull on the chest using droplets of white and black plasticine.

The plasticine bat is ready. We've got an interesting craft. It can be attached to a stick and lowered down, then the skull will be clearly visible, or, conversely, put on its feet.

Bats are one of nature's most mysterious creatures. Few have seen these animals live. After all, they are nocturnal, so during the day bats sleep, hiding in dark places - caves, grottoes, abandoned buildings and tree hollows. At night, they hunt various insects, and large species of bats love to feast on small birds, frogs and even fish. Today our lesson will teach you how to create a plasticine bat. Carefully study each step of sculpting and give your child an exciting master class. Bats are interesting creatures, so be sure to tell your little one a few facts about them.

To create a craft, you will need several materials and tools:

  • plasticine in black, gray, brown and yellow;
  • wire for attaching wings and head;
  • stack-knife for cutting mass.

How to make a bat out of plasticine

Step 1. Thoroughly knead one block of black plasticine, cut off a third of the mass and roll into a ball. We have created a blank animal head.

Step 2. Next, we sculpt an elongated body from the same piece of plasticine. We attach a piece of wire at the top of the workpiece and attach a round head.

Step 3. Create a thin cake from gray plasticine and glue it on the front of the bat's torso.

Step 4. Using a skewer, create tiny indentations for the eyes.

Below we attach an oval nose made of brown mass.

We form balls-eyes from yellow, black and white plasticine. We glue them into the holes.

Draw the line of the mouth under the nose and complement it with a pair of white fangs.

Step 5. We also form large ears from brown and black drop-shaped cakes. We fix them on the top of the head and bend the tips a little.

Step 6. Add brown cakes to the lower part of the body. Draw thin fingers along the edge with a knife.

Step 7. Cut out wings from black cakes and glue thin veins on them.

Print Thanks, great lesson +9

Many people are afraid of mice, let alone bats. A small mouse, a rather cute creature, we already know how to sculpt with you from plasticine, it's time to learn how to sculpt another animal, which we also call a mouse, only a flying one. And we will time our lesson, of course, with the celebration of Halloween, which is just around the corner. Bats are companions of evil spirits, witches and vampires, just like black cats. Bats are not at all similar in appearance to ordinary mice, to begin with, they are black, not gray, in addition, they have paw-wings with membranes, as well as long ears and fangs, like vampires. Let's move on to the lesson.

Other Halloween Tutorials:

Step-by-step photo lesson:

The main color of the plasticine that will be used to sculpt the Halloween object - the bat - is black. Absolutely all parts of the animal's body will be made from it. Only the teeth and eyes will need to be highlighted. For the teeth, prepare tiny white grains (very, very small), and the eyes can be made from beads to make them sparkle and appear more ominous.


Blind a small torso, pointed towards the bottom. Also prepare 2 lower legs. Extend the paws with your fingers at the tips and cut with a stack.


Glue the plasticine legs to the lower, sharp torso.


To sculpt spreading wings, form an oval black cake by flattening the clay with your fingers and pressing it against the board.


Cut out the outlines of the wings in a stack. From above, the wings will be arched, from below - zigzag.


Stick on the webbing.


Glue the wings to the back. Show the ears on the head, pulling out the soft mass with your fingers.


Attach two white canine teeth to the face. Use beads instead of eyes (preferably shiny).


Turn the bat upside down, because it is in this position that it likes to hang under the roofs of houses, on the beams and tree branches. Insert a stick into the paws.


 

It might be useful to read: