Soap bubbles large volume. How to make huge soap bubbles. Portal Editor-in-Chief: Ekaterina Danilova

How to make soap bubbles, recipe for soap bubbles, composition for soap bubbles

Soap bubbles are a symbol of carefree happiness. How much joy they bring to children, and invariably cheer up adults. This simple fun appeared in antiquity. It is said that during the excavations of ancient Pompeii, images of children were found blowing into tubes from which bubbles fly out. If you want to take a break, give your little fidget a bottle of soapy water and a straw, and you can be sure that he will not disturb you for the next half hour.
As children we did bubble very simple. A little shampoo was poured into the container, diluted with water, shaken and the balls were blown out of the tube. But, unfortunately, they did not rush up, but fell to the ground. In addition, large bubbles did not inflate at all, they burst, not yet breaking away from the tube. Now in the store you can buy many devices for creating bubbles along with a ready-made solution.

But for those who want to show their imagination, we offer several ways to make soap bubbles yourself.
For the simplest and most proven recipe, you will need 200 ml of dishwashing liquid, 600 ml of water, and, very importantly, 100 ml of glycerin, which will add strength to the bubble. You just have to stir the solution, and multi-colored "durable" bubbles are ready.
If you are wondering how to make large soap bubbles, then this recipe is suitable. It is necessary to rub a piece of laundry soap into hot water (400 ml). Heat over low heat until completely dissolved. The result should be left for a few days, and then add a couple of tablespoons of sugar to it. Such bubbles can be inflated to huge sizes, they will not burst.

And you can make the bubbles even more colorful. To do this, you need to take half a glass of dish soap (baby shampoo may work), one and a half glasses of water, 2 teaspoons of sugar and a little food coloring.
Why add sugar to the mixture? Oh, in soapy water, he can work wonders! Thanks to him, the bubbles are inflated not one at a time, but immediately in large numbers, literally shooting from the tube, like from a machine gun.
When you have mastered the ways of how to make soap bubbles yourself, it will be easy to come up with many exciting games. For example, you can make several bubbles inflate in each other. To do this, you will need a glass funnel from which a large soap bubble is blown. Then they take a tube, lower it almost entirely into a soapy solution and push it with great care through the wall of the first bubble, bringing it to the middle. Then, gently pulling it back, inflate the second soap bubble inside the first one.
This experiment is quite complicated, it is suitable for children over 7 years old, who are no longer so interested in just blowing into a tube and enjoying flying rainbow balloons.
So, if you figured out how to make soap bubble liquid, then everything depends on your imagination. You can just blow bubbles while watching them fly. You can arrange competitions - who will blow the most. And you can conduct complex experiments that require accuracy and concentration.
It is also worth telling how to make soap bubbles around a flower or any other beautiful object. Of course, the resulting composition will be short-lived, it cannot be given as a gift, but you will be provided with a charge of excellent mood.
Pour the solution prepared according to one of the above recipes into the plate by 2-3 mm.
Put a flower in the middle and cover it with a glass funnel. Then, very gently, begin to lift it up by blowing into its narrow opening. You should have a bubble. When it is large enough, gently tilt the funnel to release it. Now your flower is under a transparent rainbow dome.
Learning how to make soap bubbles is quite simple. It will take a little patience, and the main thing in this matter is fantasy, which will allow you to come up with new games with soap balls.

Recipe for Giant Soap Bubble Solution(the recipe is designed for 3.5 liters of solution):

  • 2 cups faerie or other dishwashing liquid
  • 1 cup corn syrup
  • 1 sachet regular gelatin
We mix all the components, add water to a volume of 3.5 liters, do it slowly so that a lot of foam does not form. We leave the mass for 24 hours.
To make huge soap bubbles around a child, you need about 10 liters of soap solution. Pour liquid into a large basin or a children's inflatable pool, put a hula hoop in the center and carefully place the child (very slippery!), Slowly raise the hula hoop and the child is in the bubble!!! The kids are usually delighted!

And here is another easy way to make soap bubbles:

  • 200g dishwashing detergent
  • 600ml water
  • 100 ml of glycerin (sold in any pharmacy). Glycerin gives bubble strength
  • You can add some sugar

Interesting ideas with soap bubbles:

  • Bubble in a bubble. To do this, you will need a funnel and a drinking straw. We blow the first bubble through the funnel, while it has not come off yet, we push the tube to the center of the first bubble and blow it out.
  • Soap bubbles in the cold. It's great to inflate bubbles in the cold, at a temperature of -5-7 degrees the bubble can freeze if you put a snowflake on top of it or gently lower it into the snow. This is really a very beautiful sight, the bubble is covered with patterns and shimmers with all the colors of the rainbow.
  • Bubbles by candlelight. You know, there are such special floating candles, and so, if you put them in a bath of water, turn on and turn off the light and blow bubbles at the same time, there will be a wonderful flickering spectacle.

Inflating devices:

  • Wire loop. Can be made in different diameters.
  • Straw for drinks. Try cutting it into 4 pieces at the end and unroll them like a flower.
  • Loop for giant bubbles. Through two strong straws, you pass an elastic band (Hungarian), the length is 5 times longer than the tubes and tie the ends together. Lower the tubes folded together into the solution and slowly dilute, you should get a huge bubble, you can blow it yourself, or you can put it in the wind.
  • Two sticks with a rope tied between them to form a triangle.
  • In general, there are a lot of ways ... experiment ...

Recipe for how to make soap bubbles for the show

  • 15 parts distilled water
  • 0.5 parts glycerin
  • 2 tablespoons lemon juice
  • 1 tablespoon bicarbonate of soda
  • 1 teaspoon J-Lube

Second recipe

A slightly different proportional composition for soap bubbles:
  • 12 parts distilled water
  • 1 part Fairy ultra liquid detergent
  • 0.5 parts glycerin
  • 0.25 hours Polyvinyl alcohol
  • 2 teaspoons of Metylan glue (see photo below)
  • 1 teaspoon J-Lube
The easiest way to prepare a solution is as follows: 200 gr. dishwashing detergent (but not for dishwashers) you need to take 600 ml. water and 100 ml. glycerin (sold in any pharmacy). Mix everything well and your solution is ready. Glycerin is exactly the tool that makes the walls of the soap bubble stronger, and the bubble itself, respectively, more long-lived.

Method number two. This soap bubble recipe is more complicated and the preparation of the solution will take more time. For 600 ml. HOT water must be taken 300 ml. glycerin, 20 drops of ammonia and 50 gr. any powdered detergent. We mix all the ingredients and leave to brew for 2-3 days. After that, the solution is carefully filtered and put in the refrigerator for 12 hours. And finally, you can start blowing rainbow beauties.

The third way, in my opinion, is very doubtful. But you can try. Rub a piece of laundry soap on a coarse grater. Dissolve the resulting soap shavings (4 tablespoons) over low heat in 400 ml. hot water. Leave the solution for a week, after which add 2 teaspoons of sugar to it. Leave until sugar dissolves, mix - ready.

And you do not want to create a festive mood for your children on the most ordinary day? It turns out that it is very easy. No need to invent new games or go to Entertainment Center. Soap bubbles are sure to cheer everyone up. Do you know, how to make homemade soap bubbles? It often happens that soap bubble liquid purchased in a store casts doubt on its quality. Therefore, you can think about how to make homemade soap bubbles that will be not only strong, but also huge.
There are several recipes for soap bubble solution.. Depending on which one you choose, the size of the bubbles will vary. There is also a solution that is best used in winter.
To prepare the most common solution for soap bubbles, take 1/4 cup of water, 1/3 cup of baby shampoo, 2 teaspoons of sugar. If desired, you can add a drop of food coloring, then your bubbles will shimmer beautifully. Instead of sugar, you can take glycerin, which is sold in a pharmacy. Adding sugar or glycerin will make the bubbles firmer.
Blowing soap bubbles is also very fun in the cold, at temperatures below -7 ° C. Since it is very cold outside, soap bubbles will freeze and become patterned like frosted glass. In this case, to make homemade soap bubbles, you will need laundry soap. Plan it in warm water in a ratio of 1:10. To make the soap melt faster, you can boil the liquid. Stir the soapy solution carefully so as not to burn yourself.
You can check the prepared solution like this: try blowing a bubble with a diameter of 10 cm. If you succeeded, the solution is ready. If not, you can add more soap. In addition, soap bubbles can be tested for strength. Dip your finger in the soap solution and gently touch the bubble. If it does not burst, the solution is ready. To make the bubbles stronger, you can add a little more soap. As a result, you will get a liquid that will be ideal for playing with soap bubbles in the cold.
Another good bubble solution recipe: Take 2 parts soap, 4 parts glycerin, 8 parts water and 1 part sugar syrup. Be sure to use hot water to prepare the solution.
Would you like to try blowing huge soap bubbles?? To do this, you will need not only a solution, but also a special device. The solution for such soap bubbles is made as follows: take 200 ml of dishwashing detergent, 600 ml of warm water and 100 ml of glycerin. To make the bubbles stronger and not burst so quickly, you need to take soft water. Ordinary tap water is not suitable, because it contains a lot of salts, which makes soap bubbles fragile. To soften water, it is enough to boil it and let it stand.
Now make a special device for inflating huge bubbles. Make a loop out of nylon rope and tie it to two sticks. Tie the loop so that it forms a triangle shape, for which you can use a small weight.
Now you can start blowing bubbles. They are best done outdoors in calm weather. Pour the solution into the basin and lower the rope loop from your device there. Pick it up and start stepping back. Under the action of the air flow, the bubbles will inflate themselves and can reach up to 1 m in diameter.
You can also make dolls out of soap bubbles. To do this, take any solution for bubbles and pour it into a flat plate with a diameter of 20 cm. Using a straw for cocktails, inflate the bubble so that it lies on the plate. You will get a hemispherical bubble. Carefully insert the straw inside the bubble and inflate another one, but now smaller. This way you will get several bubbles located one in one.
As you can see, playing with soap bubbles is a fun hobby.. Both adults and children really like to inflate them and watch them shimmer with iridescent stains. Try and play with your children in this fun and interesting game! After all, now you know how to make homemade soap bubbles.

composition and recipe of soap bubbles - how to make at home attached!
First recipe- the most common soap bubbles.
Composition:
1/3 cup tear-free baby shampoo 1/4 cup water 2 teaspoons sugar 1 drop food coloring

viscous soap bubbles
Composition:
1/4 cup dishwashing liquid, 1/4 cup glycerin (drug store), 3/4 cup water, 1 tablespoon sugar.

One more tip:
Bubbles can be blown with any foaming liquid ... but ordinary laundry soap is best. It needs to be finely cut, dissolved in hot water (you can even warm it up very much for this)
Approximate proportions are as follows - 10 parts of water to 1 part of soap.
The life of a bubble depends on how long it stays wet. Glycerin is great at slowing down the drying time. so does a solution of sugar with gelatin. The glycerin solution is better, but sugar and gelatin are not so expensive and we always have them at home. Proportions such -glycerol are added from 1/5 to 1/3 parts in relation to the volume of the soap mixture. Or 1/4 part of a solution of sugar with gelatin. The best mixture for very large blisters is 2 parts soap, 4 parts glycerin, and 1 part syrup diluted in 8 parts water.
Cocktail straws are suitable for blowing soap bubbles. Make 4 short cuts at one end and separate them in different directions, like the petals of a flower.

It is very interesting to blow soap bubbles in the winter on the street. At a temperature of -7 degrees, the bubble can freeze. To do this, you need to put a snowflake on top of it or gently lower the bubble onto the snow. Such a trick requires a lot of effort and effort, but it's worth it, believe me!
How else can you diversify the process of inflating soap bubbles? Take a flat plate with a diameter of 15-20 cm. Pour some bubble solution on it, take a cocktail tube and blow a large soap bubble so that it lies on a plate in the form of a hemisphere. Then gently twist the tube so that its end detaches from the wall of the bladder, but remains inside. Blow a second bubble. How many times you repeat this procedure, so many bubbles you will have according to the "matryoshka" principle.

10 compositions for large soap bubbles

In recipe formulations, the word "part" is used. "Part" is any volume, for example:
Composition No. 4:
16 parts water
3 parts detergent
1 part glycerin

So, it can be 16 tablespoons of water, 3 tablespoons of detergent, 1 spoon of glycerin or
160 ml water, 30 ml detergent, 10 ml glycerin...

Fairy is used as a detergent, it must be said that it is Fairy that gives the best result.

So the ingredients are:

Composition 1.

50 grams of sugar
10 grams of boiling water
Got syrup.

Mix with detergent in the ratio of 20 syrup and 1 detergent.

Composition 2.

0.5 cup baby shampoo (I used Dragonfly shampoo)
1.5 cups distilled water
2 teaspoons sugar (no slide)

Mix and add the same amount of glycerin to the resulting mixture.

The word "the same" implies that you mixed all the components except glycerin, and you got a certain volume of solution, and that's exactly the same amount, then glycerin is added, the same amount as the volume obtained from the remaining components.

Composition 3.

200 ml baby shampoo (shampoo "Dragon" was used)
400 ml distilled water
3 tablespoons of glycerin

Mix.

Composition 4.

16 parts water
3 parts detergent
1 part glycerin

Composition 5.

100 ml water
2 ml baby shampoo
10 ml. glycerine

Mix and add ammonia until transparent.

Composition 6.

4 parts distilled water
1 part detergent
1 part glycerin
0.1 part ammonia

Mix.

Composition 7.

2 parts detergent
6 parts distilled water
1 part glycerin

Composition 8.

600 ml. hot water
300 ml glycerin
20 drops of ammonia
50 grams of powder detergent

Mix, insist 2-3 days, filter and refrigerate for another day.
(the condition for which it is required that the agent be infused was not met in the experiment)

Composition 9.

1 liter of distilled water
150 ml glycerine
300-400 ml baby shampoo

Composition 10.

1 part dish liquid
5 parts polyvinyl alcohol
7 parts water
0.4 parts glycerin

Some compositions at first glance are the same, but in such a delicate matter as a soap bubble, proportions can play a decisive role.

Everyone loves soap bubbles since childhood, but not everyone knows them. And so they spend a lot of money on this fun entertainment for their children (and adults, to be honest :)). Moreover, you hardly know how to make BIG soap bubbles. Consider a few recipes that will help create this soap miracle.

The first one is for the most common bubbles.

We will need:

  • 2 teaspoons granulated sugar;
  • 1 drop of food coloring of the chosen color;
  • 1/3 cup shampoo, preferably baby
  • 1/4 cup water.

To make sticky bubbles required:

  • 1/4 cup glycerin, you can buy at a regular pharmacy (straight);
  • 1 st. a spoonful of granulated sugar;
  • 1/4 cup dishwashing liquid, such as Fairy.

One more interesting method:

Bubbles are best made from ordinary household items. You just need to cut it, then pour it with hot water, or boiling water, in order to dissolve it.

Here approximate proportions water to soap: 1 part should be from soap and 10 parts of water.

The lifespan of a soap bubble will depend on how long it stays wet.

Ordinary glycerin perfectly slows down the drying process, and a solution of sugar and gelatin also works. Of course, the glycerin method is much more effective, but it is not always available at home, like sugar and gelatin, which, by the way, are a little cheaper than it.

Here are the proportions: approximately 1/4 should be the proportion of glycerin from the total volume of the soap mixture. Sugar with gelatin should be the same.

And be sure to read our article,! Well, very interesting match decisions.

And here is the best mixture for making large soap bubbles:

  • 2 parts should be soap;
  • 4 parts glycerin;
  • 1 part syrup;
  • 8 parts water.

In order to blow bubbles, ordinary cocktail straws are suitable. It is necessary to make four small cuts at one end, and then part them in different directions, like the petals of a chamomile.

But are you looking for a way to make big soap bubbles? Then you need to do inflator. These are just two sticks with a rope tied between them. Tie it so that it forms a triangle when spreading the sticks to the sides.

Let's blow our giant bubble like this. Dip the inflator in the soap solution, then you need to pick it up and start moving back. The resulting air flow will inflate the bubble. Good luck!

How to make soap bubbles at home?

Editorial response

Soap bubbles have attracted both children and adults since ancient times. During excavations in Pompeii, archaeologists found frescoes (1st century AD) depicting people blowing bubbles. This game is no less popular today.

Durability is the main thing that is valued in soap bubbles. This property directly depends on the correct proportion of the ingredients for the solution, therefore, if you decide to make bubbles yourself, you must strictly follow the instructions.

Recipe 1

One of the most simple ways. You need to take 200 g of dishwashing detergent (only not for dishwashers), 600 ml of water and 100 ml of glycerin (sold in any pharmacy). All ingredients must be mixed well. Ready! The glycerin (or sugar) in this formulation contributes to the strength of the blisters. By the way, you can’t take plain tap water - it will contain a lot of salts, and this will have a bad effect on the quality of the film. Therefore, it is better to boil water and let it cool or use distilled water. Such bubbles will be durable, although not very large.

Recipe 2

This method is more difficult - it will take more time and require complex components. For 600 ml of hot boiled water, you need to take 300 ml of glycerin, 20 drops of ammonia and 50 g of any detergent (in powder form). We mix all the ingredients and leave to brew for two to three days. After that, the solution is carefully filtered and put in the refrigerator for 12 hours. A little tedious, but such a product will allow you to make long-lasting and large bubbles, just like professionals performing at the soap bubble show.

How to check the quality of the prepared mixture?

A bubble with a diameter of 30 mm should, on average, “live” for about 30 seconds. If you dip your finger in a soapy solution, and then quickly touch it to a soap bubble - and the bubble does not burst - then the solution turned out to be correct.

After the soap solution is ready, we just have to choose a tool for blowing bubbles.

How to blow soap bubbles?

A "classic" among bubble blowers is a straw, such as a cocktail straw. The straw was also used 300 years ago - we see it in the picture of the French painter of the 18th century Jean-Baptiste Chardin(1699-1779) "Soap bubbles" - and continue to use now.

Soap Bubbles, Jean-Baptiste Siméon Chardin, 1734. Photo: Public Domain

To blow soap bubbles more difficult, for example, according to the “matryoshka” principle, pour the bubble solution into a flat plate with a diameter of about 20 cm. Using a straw, inflate the bubble so that it “lies” on the plate. You will get a hemispherical bubble. Now gently insert the tube inside the bubble and inflate another one, but smaller.

How to prepare a solution for giant (from 1 m in diameter) soap bubbles?

The show with huge soap bubbles shimmering with all the colors of the rainbow fascinates both adults and children. It can decorate both children's parties and weddings and give an unforgettable magical atmosphere.

Recipes for large (from 1 m in diameter) bubbles

Recipe #1

  • 0.8 l of distilled water,
  • 0.2 l dishwashing detergent,
  • 0.1 l of glycerin,
  • 50 g sugar
  • 50 g gelatin.

Soak gelatin in water, leave to swell. Then strain and drain off excess water. Melt the gelatin with sugar without boiling. Pour the resulting liquid into 8 parts of distilled water, add the remaining ingredients and mix without foaming (foam is the enemy of soap bubbles!).

Such a solution gives especially large and durable blisters, and most importantly, it is absolutely non-toxic, which means that it is harmless to you and your child even when it comes into contact with the skin.

Recipe number 2

  • 0.8 l of distilled water,
  • 0.2 l of thick dishwashing detergent,
  • 0.1 l of lubricant gel without impurities,
  • 0.1 l of glycerin.

Mix gel, glycerin and dishwashing liquid. Add hot distilled water and mix thoroughly without creating foam on the surface. This method will allow you to make the most "tenacious" bubbles that do not burst even when in contact with water.

How to make giant bubbles?

For blowing giant bubbles, an ordinary straw will not work. Tie a woolen thread to two sticks, such as knitting needles. The resulting design must be dipped in a plate with soapy water, allowing the woolen thread to soak. Further, pushing and moving the spokes, try to create your first soap creation.

Another - more complex - method of manufacture will require step by step instructions. You will need 2 sticks, a string that should absorb the soapy solution, and a bead.

Step 1. One end of the string must be tied to the end of one of the sticks.

Step 2 Step back 80 cm and put on a bead (acts as a load), then tie the cord to another stick.

Step 3 The remaining tip must be tied back to the first knot. The result should be a triangle of cord on sticks.

To start a bubble, dip the cord into the solution, let it soak up the soap, and then pull it out, raise it with outstretched arms in front of you and straighten the sticks. Do not make sudden movements, but do not delay the process, as the soapy solution can quickly spill onto the ground.

*Bubble show stores and large children's stores have a huge selection of giant soap bubble blowers in different shapes and with different numbers of holes. You can blow one big bubble or a swarm of tiny bubbles that will scatter in different directions in an instant.

Soap bubbles are a simple, fun and exciting entertainment that is loved not only by children, but also by adults. Therefore, many are interested in how to make soap bubbles at home. You can make blister fluid at no major cost and in almost any quantity. There are many ways to prepare the composition with your own hands. Consider some of them, and you will choose your favorite recipe.

Classic recipe

Ingredients:

  • 500 ml of water;
  • 50 g of laundry or glycerin soap without fragrances and dyes;
  • 2 tablespoons of glycerin.

If you do not have the last component at home, then a jar of glycerin can be bought at almost any pharmacy. First grind the soap by grating or finely chopping. Pour hot water over it and stir until completely dissolved. If the soap does not dissolve well, you can slightly warm the water, stirring it constantly. But do not bring the solution to a boil! If necessary, strain the composition through cheesecloth. After that, it remains to add glycerin to the soap solution.

This is a fairly simple and affordable recipe. You will most likely find all the components in your kitchen. Plus, you don't have to wait for the soap to dissolve.

Required Ingredients:

  • 400 ml of water;
  • 100 ml dish detergent;
  • 2 teaspoons of regular white sugar.

It is better to take ordinary dishwashing liquid without dyes and flavors. Dishwasher detergent is not suitable. So, to prepare a solution for soap bubbles, add dish detergent and sugar to warm water. After that, mix the ingredients well. Everything, the solution is ready!

Washing powder solution

It will take you several days to prepare a solution with the addition of washing powder. Therefore, if you want to please yourself and your child right now, this recipe will not work for you.

You will need the following ingredients:

  • 300 ml of water;
  • 100 ml of glycerin;
  • 8-10 drops of ammonia;
  • 20-25 g of washing powder.

Add laundry detergent to hot water and stir until completely dissolved. Then add the rest of the ingredients. The resulting soap solution should stand for about 2 days. After waiting a couple of days, strain the solution and refrigerate for several hours (or overnight). After that, the composition will be ready for use.

Bubble recipe for toddlers

It happens that while playing with a child, drops from bursting bubbles get into the eyes. And then entertainment does not bring any joy. Liquid with the addition of mild baby shampoo, getting on the mucous membranes, does not cause pain and burning in the baby. How to make soap bubbles at home for the little ones?

Required Ingredients:

  • 500 ml of water;
  • 200-250 ml of baby shampoo;
  • 3 tablespoons of granulated sugar.

Dissolve the shampoo in warm water. The prepared liquid should brew a little. Leave the solution overnight, or better - for a day. Then add sugar to the mixture and mix everything well. The bubble solution is ready.

Recipe for Extra Strong Bubbles

If you want to get non-popping bubbles, you will need the following components:

  • 800 ml of water;
  • 350-400 ml of glycerin;
  • 200 g of laundry soap;
  • 80 g sugar.

Rub the soap and pour the resulting shavings with hot water. Stir the liquid until the soap is completely dissolved. After that, add sugar and glycerin to the mixture and mix everything thoroughly again. From the resulting solution, you can make not only strong bubbles, but also various soap figures, for example, by blowing balls onto a smooth table.

Original recipe: solution with syrup

Corn syrup can replace sugar or glycerin. To prepare the solution you will need:

  • 600 ml of water;
  • 200 ml of shampoo or dish liquid;
  • 70-80 ml corn syrup.

The recipe for this composition is very simple: you just need to add syrup and dishwashing detergent to water, and then mix everything well.

Checking the quality of soapy liquid is easy: inflate the bubble, dip your finger into the foam and gently touch the bubble with it. If the ball burst, then it is worth adding a small amount of glycerin or sugar. If the bubbles are difficult to inflate and are too heavy, add a little water to the solution. If the bubbles inflate well and do not burst, then the solution is prepared correctly, nothing else needs to be added to it.

Recipe for the preparation of the composition for large bubbles

Various soap bubble shows are now very popular, which can be seen at weddings, birthdays and other festive events. You can also arrange such a show for children or friends.

To prepare the composition with your own hands, you will need the following ingredients:

  • 800 ml of water;
  • 200 ml of dishwashing detergent;
  • 150 ml of glycerin;
  • 50 g of granulated sugar;
  • a bag of gelatin (30-40 g).

Before making soap bubbles, it will be necessary to prepare the gelatin. Soak it in a small amount of water (read the recipe on the bag) and leave to swell, then strain. Mix gelatin with sugar and melt the mixture without boiling it. This can be done in a water bath or in a microwave oven. In 800 ml of warm water, add the resulting mixture of gelatin and sugar, and then the rest of the ingredients. After that, it remains to mix everything thoroughly.

The solution can be prepared in a wide basin. And they form giant bubbles using a hoop or a large frame made of flexible material. True, you do not have to blow the balls. Just dip the frame into the liquid and gently pull out the big bubbles.

If you want good bubbles that won't pop while blowing, consider the following guidelines.

  1. To prepare the solution with your own hands, it is recommended to use not tap, but boiled or bottled water.
  2. When choosing soap, dishwashing detergent or powder, pay attention to the composition. The less dyes and perfume additives will be in the product, the better the bubbles will turn out.
  3. Glycerin, like sugar, affects the density of the solution and the strength of the blown balls. But do not abuse the glycerin, otherwise the solution will be too dense and the bubbles will be difficult to inflate.
  4. Bubbles obtained from a less dense solution are not as strong, i.e., they burst faster. But they are much easier to blow out. Therefore, this composition is more suitable for kids.
  5. If possible, keep the prepared solution in the refrigerator for 1-2 days before use.
  6. Before inflating, it is necessary to wait until there is a solid film on the surface of the solution without foam and bubbles. The foam can be removed or wait until it disappears on its own. Cooling the liquid is the easiest way to get rid of unnecessary foam.
  7. Blow the balloon slowly and evenly, otherwise the soap film will quickly tear and the bubble will burst.

Optimal conditions

If you are blowing soap bubbles outdoors, get ready for the fact that the result will largely depend on the weather. Strong wind and dust are the real enemies of bubbles. Also, they should not be allowed on a dry and hot day when the air temperature exceeds 25 degrees. But high humidity, on the contrary, will be an excellent assistant in the "soap" business. It is believed that the best results are obtained in the morning or evening after rain or watering the lawn.

If you are blowing bubbles at home, then avoid strong drafts. Also, the room should not be too hot, dry and dusty. It is important to consider: in some cases, bubbles, bursting, can leave marks on parquet, linoleum or furniture.

In many ways, the size and quality of bubbles depend on the tools that are used for blowing. Today it is easy to find many ready-made tools of different shapes and sizes in the store. But you can make them yourself. For example, a wire twisted with a loop is perfect for these purposes. Some use plastic bottle with a cut-off bottom or curly molds for dough. You can also use a straw for cocktails. And to make the balls larger, several longitudinal cuts can be made at the end of the tube.

Safety regulations

  • When working with the solution, be careful: it should not get into the eyes, nose and mouth.
  • If you made bubbles for a baby, make sure that he does not taste the solution.
  • Blow soap bubbles in a direction where there are no people or animals.
  • If splashes from the bubble do get into your eyes, rinse them thoroughly with clean, running water.
  • After preparing the composition and experimenting with soap bubbles, do not forget to wash your hands under running water.

If you want to give a holiday to your child or just to cheer up your loved ones, use one of the recipes presented. As you can see, you can make beautiful bubbles with your own hands without special efforts and serious costs.

Recipes for solutions for soap bubbles - giant, non-bursting, fragrant, multi-colored. Catalog on Aliexpress.

Summer has come into its own, which means there are many more reasons for children's holidays. The gentle sun, the beauty of nature, the river and the sea - everything whispers about the joy and value of every day.

Perhaps every kid experiences a special delight from soap bubbles. And it doesn’t matter if he blows them on his own or takes them as assistants to his parents. Emotions of joy and celebration cover both participants in the process and passive observers.

If you are a supporter of reasonable spending, environmental friendliness of goods and minimizing their harm to your child, be sure to make a soap solution for bubbles at home. Include older children in this process as well.

How to make strong, non-bursting, elastic soap bubbles with glycerin at home: recipes, photos



strong soap bubbles with glycerin fly in the air

Recipe 1

  • Mix equal amounts of water and dishwashing liquid.
  • Add sugar and glycerin, taken in a ratio of 1:2.
  • Leave in the refrigerator for 12 hours.

Recipe 2



girl blowing soap bubbles from homemade solution
  • Combine 750 ml of water with half a glass of glycerin and 250 ml of liquid dishwashing detergent.
  • A day later, the solution is ready for use.

Recipe 3



girl enjoys playing with soap bubbles
  • Take soap, glycerin, warm water and sugar in a ratio of 3:6:12:2 and mix well.
  • After a day, give the solution to the children for fun.

Recipe 4



strong soap bubbles connected in rings
  • Mix baby shampoo with water and glycerin, taken in a ratio of 3:4:2.
  • Mix thoroughly and leave the solution to mature for at least 12 hours.
  • Check bubbles for strength and elasticity. If necessary, increase them, add a little glycerin.

Recipe 5



strong soap bubbles are made at home

Suitable for creating a solution for blowing particularly strong soap bubbles.

Connect:



list of ingredients for the preparation of a soap solution for air bubbles

This solution will please children who love to build figures and pyramids from soap bubbles.

How to make fragrant soap bubbles at home: recipes, tips, photos



the girl blows fragrant soap bubbles made by her parents at home

Recipe 1



solution in the process of kneading for fragrant soap bubbles at home
  • Mix bath foam and water in a ratio of 3:1.
  • Leave the solution to mature overnight.

Recipe 2



girl blowing fragrant soap bubbles made at home from baby shampoo

Shampoo, for example, for children, can act as a flavoring agent.

Then you should:

  • mix distilled water and shampoo in a ratio of 2:1
  • keep the solution overnight in a cool place
  • enter glycerin 3 scoops or 2 times more sugar
  • stir and leave to ripen again for a day

Try to minimize fragrance additives when making your bubble soap solution. They can significantly reduce the ability of balloons to blow out and retain their shape until contact with the surface.

How to make soap bubbles without glycerin at home: recipes, photos



a girl blows large soap balls made according to a recipe without glycerin

Recipe 1



a few soap balls from a homemade solution without glycerin

Combine boiled hot water with grated on a regular grater laundry soap in a ratio of 10:1 and add a couple of teaspoons of sugar.

Recipe 2



a child blows soap bubbles from a homemade solution without glycerin
  • Prepare a solution of 1.5 cups of hot water, a tablespoon of laundry detergent and 10 drops of ammonia.
  • Leave the solution to mature for 3 days.
  • Filter the result so that undissolved particles do not get into it.
  • Enjoy beautiful big soap bubbles.

Composition of soap bubbles for children



baby surrounded by small soap bubbles

How smaller child the more we pay attention chemical composition fluids that come into contact with his skin.

  • To keep baby bubbles as safe as possible, use baby shampoo as a soap ingredient.
  • Strength during blowing bubbles will give sweeteners - glycerin and sugar.
  • You will achieve colors and interesting overflows if you introduce food coloring into the solution.
  • To keep the bubbles after contact with surfaces and not burst, use gelatin.
  • However, the most important ingredient is water. Either distilled, or filtered, or boiled will suit you.

What to make solidifying soap bubbles from: composition



soap bubbles are collected in the shape of a heart in the air

A similar type of soap bubbles is presented on the shelves of children's stores and online platforms for goods for children.

Interestingly, manufacturers avoid specifying the composition of the solidifying bubbles. They are limited only by the phrase about their non-toxicity and compliance with sanitary standards during blowing.

However, the consistency of hardening soap bubbles from the store is many times thicker than usual. It resembles liquid transparent glue / varnish.

A similar state is inherent in sweet syrup. It is also viscous and solidifies upon contact with any surface.

Therefore, as an example, use the following list of ingredients to create hardening soap bubbles at home:



list of ingredients for making homemade soap bubble solution

How to make a solution for large and giant soap bubbles at home with your own hands: photo



giant soap bubbles surrounded by small brothers

To make a solution for giant soap bubbles, you need more ingredients than a classic soap and water mix. Namely:

  • glycerol
  • sugar
  • dishwashing detergent instead of laundry soap

Maintain the following proportions:

  • glycerin and sugar 1 part each
  • soap ingredient - 2 parts
  • water - 6 parts

Since you are planning on blowing giant bubbles, prepare the batch in a bowl or large container. And also stock up on a larger diameter ring or flexible tape. Because you don't have to blow bubbles, they will form as the ring/ribbon rises from the soap solution.

Below is a photo of giant bubbles from homemade solutions.



huge soap bubbles from home solutions, photo 1

huge soap bubbles from home solutions, photo 2

huge soap bubbles from home solutions, photo 3

How to make colorful soap bubbles at home: tips, recipes, photos



multi-colored large soap bubbles from a home-made solution
  • To add fun colors to soap bubbles, take care of food coloring at the stage of preparing the solution.
  • Divide the finished solution into several parts, in each of which add a couple of teaspoons of a specific color.
  • Introduce food coloring after the solution has fully matured. That is, 12-24 hours after mixing.
  • Adjust the quality of the batch. It is better to introduce half a teaspoon of dye and check the result.
  • Keep the property of homemade soap solution to create strong and easy to blow bubbles.

Recipe 1 with sugar



food colorings in household solutions for soap bubbles

Mix dishwashing liquid with water and sugar. Proportions for:

  • liquids 0.5:2,
  • sugar - 0.5 measuring units

Mix well and add coloring.

Recipe 2 with glycerin



process of making colored soap bubbles at home
  • Combine either baby/adult shampoo, or dishwashing liquid, or shower/bath gel in the amount of 2/3 cup with water and glycerin. The last take 4 cups and 2 measuring spoons, respectively.
  • Keep the solution day/night in a warm place.
  • Pour in the dye, stir and delight the children with beautiful soap bubbles.

Below is a photo of beautiful homemade colored soap bubbles.

Strong soap bubbles do not burst when lying on the grass

For a spectacular show of soap bubbles and increase their lifespan, make a special solution with glycerin

Prepare:

  • dishwashing liquid
  • glycerol

Proportions of ingredients 6:2:1.

  • Mix and try to blow bubbles.
  • If necessary, add a little soap ingredient.
  • Test the solution again.

To increase the number of blown bubbles, expand the list of components to:

  • shampoo
  • shower gel

Take them 2/3 cup.

How to make gel soap bubbles?



girl blows strong soap bubbles from a homemade solution

Super strong soap bubbles delight children with the possibility of building towers and similar figures. Therefore, it is important that they contain a substance responsible for the rapid solidification of the balls.

Make a solution at home for such flying fun.

Prepare:



list of ingredients for kneading soap solution for strong air bubbles at home

Create a solution:

  • combine water with gelatin and leave until the latter is completely swollen
  • strain the mass, remove excess liquid
  • add sugar and put the semi-finished product on low heat until the sweet ingredient is completely dissolved
  • stir gently, avoid boiling solution
  • take it off the heat and pour it into the water
  • enter detergent, then glycerin
  • mix everything at a slow pace to eliminate the possibility of foam formation
  • take a sample by inflating a couple of balloons
  • give the prepared solution to the children for fun

So, we examined the features of creating solutions for soap bubbles at home. We learned how to knead them correctly, took into account the tips and nuances.

Even in the case of not particularly successful kneading, bubbles will be blown out. And most of the time, that's exactly what kids want.

Have fun experimenting with making soap bubbles with your own hands!

Video: how to make soap bubbles at home?

 

It might be useful to read: