How to make a bird house out of the box. DIY bird feeders: interesting ideas and tips for their implementation. Old dishes like bird feeders

Conservationists, lovers of tinkering and just those who like the idea of breathing new life into something completely ordinary, they will not be able to pass by the idea of making a bird feeder out of a box. If you involve children in needlework, then such a simple, at first glance, lesson can turn into an interesting, almost magical event. And at the same time, yesterday's garbage that no one needs will turn into real help to little feathered friends.

First of all, it is worth noting that when making a feeder out of a box with your own hands, you will need cutting objects. Therefore, very young children should be supervised by adults. But you shouldn't leave the older guys either, because it's better to do this fun activity together.

The idea itself is simple, it only requires a box, sticks and self-adhesive paper, which can be used for decoration if desired. The pattern under the tree will look very nice, it will harmoniously fit into the landscape. List of what you may need:

The list is approximate, almost all the details can be replaced with something else, it all depends on your ingenuity. They also make bird feeders from boxes for other purposes, for example, shoe boxes. But the most convenient is still milk.

(17 estimates, average: 4,18 out of 5)

Making a bird feeder with your own hands is a fun and rewarding business, especially if your kids are helping you. After all, it is very difficult for our feathered friends to survive the winter cold. Sad statistics show that out of 10 birds, only 2 birds survive until sunny spring days. And by placing an original bird feeder with your own hands in a public garden, park or on your own personal plot, you will save more than one bird life from hunger.

How to make a bird feeder with your own hands?

By arranging feeding point for birds on your garden or summer cottage, you kill two birds with one stone: you save the birds from hunger in the winter and protect your crop from numerous pests in the summer. Our feathered brothers are effective fighters against midges and other harmful insects. The birdies will delight you with cheerful chirping, jolly trills or funny games and bustle around the food, and all this is fascinating to watch.

Having shown a little imagination and making an original bird feeder with your own hands from scrap materials, you will decorate your garden with an unusual accessory! So what do you need to have on hand, how to make a bird feeder with your own hands? Empty cans, wine bottle corks, plastic cans and bottles, scraps of branches, unnecessary pieces of plywood, roofing material and boards, unused dishes (cups and saucers, mugs, teapots, decorative glass bottles), metal or nylon mesh and other household trash. For fastening and decoration, rope, fishing line, various chains, ribbons and nylon ribbons, wire will fit.

Despite the variety of materials, all designs can be conditionally subdivided into four groups:

Sturdy and durable birdhouse-like feeders made of wood.
"Disposable" feeders made of cardboard boxes do not require any expenses, but they will not last long either.
Easy to manufacture, designs from plastic cans, cans or bottles.
Feed suspended by strings.

What to use for feeding?

Experiencing significant nutritional deficiencies in the colder months, birdies will happily peck whatever you offer them. For complementary foods, use any ground cereals: buckwheat, rice, oats, millet and millet - everything will be eaten. Grind any nuts and grains, add a little honey to the seeds of pumpkin, melon, watermelon, quinoa, thistle, hemp, sunflower, quinoa.

In the bird feeder put small pieces of bacon or chicken, boiled and finely chopped egg. Any dry berries and fruits, especially viburnum and mountain ash bunches, will not be ignored.

When arranging a dining room for birds, one must not forget to regularly fill the feeder with a nutrient mixture, since birds, getting used to feeding in one place, are ready to fly a rather long distance for food. And not finding food in the usual place, tired and hungry, can die. Do not use rye bread, fried nuts, cereals, grains and seeds, salty foods, citrus fruits, fresh rolls for bait. Such foods will harm birds.

When choosing material for making a feeder, you need provide several points:

How to make a bird feeder affordable and safe?

You need to arrange feeders in open, well-visible areas, that is, in places accessible to birds. In dense branches, heavily blown areas, or in places where cats can reach, you should not organize feeding places for birds. Bird feeders, fixed on the trunk or branch of a tree, or on the walls of outbuildings at a height of about one and a half meters, are easily accessible for birds, it is convenient to add food to them and they are inaccessible to domestic predators.

Most of us think of a bird feeder as a small house or birdhouse. This shape is an ideal solution for organizing poultry catering.

Whatever material you choose, the design must necessarily include:

Lightweight bird feeders made of plastic or cardboard, it is easy to weight it down by placing a piece of unnecessary linoleum or plywood on the bottom.

The most original bird feeders - cereals

To make it, you need a mixture of raw grains, seeds, nuts and bread crumbs. We will make the base of the feeder with our own hands from thick cardboard and nylon thread, using scissors and a thick needle. Adhesive base made from oatmeal mixed with egg and honey, or gelatin. Mix 2 tablespoons of oatmeal (not flakes), 1 egg and 1 teaspoon of honey, leave for 30-40 minutes. At this time, we cut out the base for the feeder from the cardboard in the form of hearts, stars, and any other geometric shapes.

To fasten the delicacy on the branches, use a thick needle to thread a thread, lace, braid or ribbon through a hole in the cardboard blank. Apply the swollen sticky mass to the base and roll in the prepared grain mixture. We put it in the refrigerator to freeze and after a few hours the feast for the birds is ready!

With a gelatin base, the manufacturing process is even easier. Mix the finished nutrient mixture with a warm gelatin solution and pour it into silicone baking tins. Having put in a loop for fastening on branches, we send to freeze in the refrigerator.

An original solution for such feeding will be old dishes... We leave the food prepared in any way to freeze in mugs or a teapot that has become unusable. We tie the fastening thread to the handle of the product. We hang sweets on the trees and watch the feast of birds.

Cardboard box feeder

How to make a do-it-yourself feeder from a box of sweets or a parcel, milk or juice. Having put the edges of three candy boxes into each other in the form of a triangle, glue or use scotch tape, thread any lace or tape through the roof and fasten it to the tree. The feeder is ready. Structures made of bags from any drinks will last a little longer, since they have a laminated layer inside and outside, moisture-proof... With a knife or scissors, an entrance, a round or square hole in one of the sidewalls, mute above the bottom of the box, is cut out. A rope is attached to the top for hanging from a tree. The feeder is ready in a few minutes.

Similarly, you can make a do-it-yourself feeder from plastic containers: bottles, cans, cans.

It is easier to secure the plastic feeder with a wire. And to protect the birds from injury, glue the inlet with tape or electrical tape. From plastic bottles, spending a little more time, you can make an elementary hopper feeder. To do this, two through holes are made in a one and a half or two liter bottle: the first at a height of 10-15 cm from the bottom and the second in the center of the container, perpendicular to the first. Two wooden spoons are inserted into these holes. On the wide side of the hole spoons expanding to empty the feed... Through the neck of the bottle, it is convenient to add food to the feeder; under the weight of the grain mixture, the plastic feeder is not afraid of wind gusts, the food remains dry and accessible to birds for a long time.

Having insulated from the inside, with yarn or sisal, a one and a half or two liter container, you will know how to make a birdhouse from a bottle.

A little more time and skill will be required to make a plywood bird feeder.

It can be with a gable or flat roof, open or with a bunker compartment. To make even the simplest feeder, like a birdhouse, you need a drawing that can be found on the Internet or calculate the structure yourself... Of the tools you need: a hammer, a jigsaw, nails, glue, sandpaper. In addition to plywood, a block is required.

Procedure

A plywood feeder is suspended by a rope threaded under the roof or a hook screwed into the roof. The service life of such a structure will last if it varnish or oil paint.

Classic dining room made of wood

However, with a little imagination and ingenuity, you can create a real masterpiece!

Of the tools you will at least need: a hammer and nails, screws and a screwdriver. Cutting boards can be combined with slabs or branches, preserving the bark of the tree, small branches or straw will decorate the plywood roof of the feeder in an original way. The roof of a wooden trough can be mounted on four supporting posts or on two flat supports located opposite each other. In addition, the trough with two supports can be two-level or bunker... And, having certain skills and the appropriate equipment, the sides of the birdhouse dining room can be made of any shape.

Making a double-walled feeder does not require an exact drawing of the bird feeder and adherence to exact dimensions. But there is unlimited scope for creative thought.

The assembly of the structure takes place in the same sequence as for the plywood feeder. The bottom is fastened with supports, then the sidewalls and the roof. Since the bird feeder made of wood is quite heavy and durable, it can be installed either on a support post or hanging it by a wire or rope on the branches of a tree.

For the convenience of small birds, titmice and sparrows, thin perch twigs can be attached parallel to the sides. And having cut out round "windows" in the walls and threading a knitting needle or a metal pin through them, it becomes possible to diversify the table of feathered apples, pieces of pumpkin or bacon.

The ideal solution for "remote" food outlets, especially near birdhouses, is dispenser installed inside a double-walled structure... One of the hopper options is with glass or plastic sides. On the inner side of the walls, vertical grooves are cut, not reaching the bottom of about a centimeter, into which glass or plastic sidewalls are inserted. The food will wake up through the slot as the birds eat it.

Easier to manufacture feeder, in which serves as a bunker plastic bottle... Cut at both ends, it is suspended with a wire in the center of the trough a couple of centimeters above the bottom. For the convenience of filling the hopper with the nutrient mixture, the cover of the feeder is removable.

Without the ability to frequently replenish food in the feeder, a full bunker will well preserve bird treats and allow the birds to stay full for a long time.

By placing a do-it-yourself birdhouse from scrap materials next to the dining room, you will provide tits and other small birds and housing and food.

Whatever idea of making a do-it-yourself feeder you would not choose, the birds will certainly be grateful to you! Having tried your hand at making a feeder, you can make a birdhouse with your own hands from scrap materials.

Bird feeders

How to make a bird feeder

Bird feeders are a great topic for both bird lovers and inventors of small architectural forms. How to make simple or fancy feeder from cardboard boxes, from plastic bottles, from cans, from a wooden block or bucket from mayonnaise, as well as from cake packaging and everything else, what to feed the tits and what the sparrows eat, see and read, - ideas fly in the air and land on this page.

The sweetest and most beautiful "cafe" for birds

What's the beautiful!

Master Class
1.Cut the bottle with a hot knife in two places along the basting. What width of the strip to cut, see for yourself, there are no exact dimensions.

Cut along the outline

2. See the picture below. Cut out a wider strip, get a squat figure, cut out less - the product will be higher.

The height of the feeder depends on the height of the cut piece

3. At the bottom of the bottle, cut a hole for the birds to plant, as shown in the photo. Do not forget to walk along the edge of the window with a red-hot knife so as to melt the cut and make it not sharp. The bird will sit on the edge of the window with its paws and should not cut itself.

To prevent the birds from cutting their legs

Paint the bottom of the bottle with acrylic paint.
4. When the paint is dry, make two holes with a hole punch (or hot nail) in the bottom of the bottle, on either side of the feeder entrance at the same distance.

A hole punch makes holes neater than a nail

5.Symmetric holes must be made in the upper part of the bottle, twine will be threaded into these holes, with the help of which the upper and lower parts of the bottle will be connected and this beauty will be suspended.

Connect the lower and upper parts of the structure with twine

6. Color the top of the bottle and the cork, don't forget. Let dry.
7. The twine will be threaded according to the following pattern:

Twine connects the top and bottom of the trough, and the knots are pulled up through the hole in the cork

8 Make a hole in the cork, take the knots, and pull the two ends of the twine by the knots through the hole in the cork.

Thread the twine through the hole in the cork

9Decorative detail. Make additional holes, as shown in the photo, on the bottom and top of the bottle and fasten the parts with decorative rivets. This will additionally hold the details together and give the look of a "branded item".

Rivet holes

Align the rivet holes on the bottom of the product with those on the top

The rivets especially embellish

Raffia palm twine bow

And these bottles would also make funny feeders.

Minion feeder

From cardboard boxes.

Any cardboard box with a hole cut out, suspended and filled with food is a feeder. For example, a box from Rafaelo or boxes from New Year's gifts for children, which accumulate in every house in abundance after the New Year.
We use milk cartons, paint and decorate with buttons and twigs. We glue with a glue gun with silicone glue. (I bought myself a glue gun in hardware store, it was 3 times cheaper than in the handicraft).

Milk bag feeder with buttons

Cardboard box feeder

Raffaelo box

Christmas gift boxes

By the way, if there is no balcony, but only a window, then the cardboard device will come in handy, it will not break the window when you lower it out of the window onto the windowsill. I'm afraid the neighbors in this house are not happy to feed the pigeons so close to the cars. It would be necessary to make the hole in the box small, then the pigeons would not be able to feed on the windowsill, but the tits would scurry back and forth and delight the child and the kitten with their bustle. And so in fact It's boring to look at the butt of a pigeon sticking out of the box.

The girl hangs the feeder outside the window (So much effort, but only the butt of the pigeon is visible).

Bird's "bistro" from cans

Tin can feeders

To prevent birds from cutting themselves, smooth the landing edge of the feeder.

Baby formula cans are very convenient for birds.

Lauren Martin, a French gardener, has an entire feeding garden.

From plastic bottles, simple.

The simplest home-made poultry canteen, allowing you to fill in a full bottle of seeds, since the small hole prevents the seeds from spilling out.

The simplest bird feeder

We do this according to the scheme:

How to make the simplest plastic bottle feeder

Easy to do

From other materials at hand.

From cake packaging.

Titmouse

Wooden bar idea

Bird Bar Idea

From plastic buckets for mayonnaise.

Bucket for birds1

Bucket for birds2

Wooden blocks

It's quite difficult to do, but the view is very eco-friendly.

From whole coconut.

When the party is over and the coconut pulp has been eaten, a simple meal in the form of seeds will fill the bowl of the coconut trough and the exotic restaurant will turn into a budget dining room.

Two options for one technology:

How and where to place top dressing.

This is actually an important question. After all, we live among people and our interests or the interests of our feathered friends should not conflict with the interests of the people around us.
If the droppings of birds that we weld to our window or balcony regularly fall on the lower balconies or on the cars of our neighbors, expect trouble. Do we need it?
The solution to this problem is simple. There are a few things to know.
1 Feed pigeons only on the ground, away from parking lots, balconies and window sills, so that pigeon droppings do not harm us and our neighbors.
2 Sparrows, unlike tits, do not fly away immediately, as soon as they take food, they sit in the same place where there is food and poop in the same place and throw the husks from seeds in the same place. Such a fellow sits on the edge of a bottle or perch, takes seeds, pecks and throws the husks back into the seeds or next to them. Spit, brat, all around. Tits are afraid of him and are waiting, sitting on the branches next to him, when he is full. Therefore, the container with seeds must be hung away from the wall of the house,

1. Here, at least as my neighbors did, look at the video.

It is the Yurok who has settled down, they spend the winter with us. These birds are like sparrows, they sit until they are full and try not to let the tits go, and the titmouses fly up, they take the seed and on the branch - peck out the grain from the seed.
2.Or place inside the balcony so you can clean up after your guests.

Krmushka on the balcony

Titmouse love lard

Serious feeder

Titmouse on the slope of the window

We fix the feeder with a dowel

Feeder with lid - very convenient for filling with seeds

"Khleboprovod"

A child living in this house called this construction a "bread pipe"

What do tits eat

Unfried sunflower seeds, unsalted bacon, fat, nuts (chopped, with soft pulp, such as walnuts) and an exotic option - a sawn coconut suspended from a string, are suitable for feeding tits.

What should not be given to birds
Do not give salted lard, fried seeds, smoked meats, rye bread.
Titmouses will not eat buckwheat, millet, or rice.
But the sparrows will eat millet and crushed grains and raisins.

By the way, berries of wild grapes () on your balcony will also attract birds. An alpine jackdaw arrives at us, watch the video at the end of the article.
Sala treat

Bird treat

Lard can simply be hung on a thread or cut into pieces and put in a vegetable net, I made such a structure on my feeder, which is also a viewing platform for my cats in the summer.

Winter is coming and our birds will need to survive it. Let's take care of them! Consider several options for how to make a do-it-yourself feeder.

The feeder should be with a roof, as rain can wet the feed or cover it with snow.
The opening of the feeder should be wide - the birds are afraid of confined spaces.
Choose a practical, moisture-resistant material for making your feeder.
The feeder should not be too light, as it is swayed by the wind and food can scatter. If it turns out to be too light, make it heavier. This can be done with a piece of plywood or linoleum. Place it on the bottom of the trough exactly to size.

Wood feeder

You will need: hacksaw, hammer, nails, plywood, 2: 2 cm blocks, thin wooden board.

Master Class

Blueprints

Drawing number 1

Drawing number 2

Drawing number 3

We present to your attention several options for the blueprints for making a bird feeder made of wood. You can create a regular feeding trough, a small castle, or just a bird house. And if you are a jack of all trades, then you can decorate the feeder with wood carvings, creating beautiful patterns.

Grain feeders

You will need: feed (raw), egg, oatmeal, flour, honey, gelatin, thick cardboard, scissors, thick thread, pencil, needle, molds.

Recipe number 1

Draw any figurine on the cardboard. It can be a heart, a circle, a triangle, a square ...
Cut with scissors.
Thread the needle and make a hole in the cardboard figurine to create a binding.
Prepare the glue. To do this, mix: 2 tablespoons of oatmeal, an egg, 1 teaspoon of honey and a little flour.
Leave the mixture on for 30 minutes.
Apply the glue mixture to the cardboard base.
Mix the grain mixture with the glue mixture.
Apply the mixture to a cardboard base.
Place the grain troughs in the refrigerator for a few hours.

Recipe number 2

Dissolve a bag of gelatin in warm water.
Pour food into it.
Divide the mixture into molds.
Insert the threads for fastening.
Refrigerate for a few hours.
Hang treats along the tree branches.

Candy box feeder

You will need: 2 candy boxes, glue, 2 laces.

Master Class

Smear the edges of the box with glue.
Place the edge of the box into the other box in such a way that it forms a triangle.
Glue the base of the box to the triangle.
Let dry for 10 minutes.
Thread the string through the top of the box.
Tie a knot.
Tie the feeder to the tree branch with a second string.

Juice box feeder

You will need: a box of juice or milk, scissors, lace.

Master Class

Plastic feeder

You will need: plastic bottle with a capacity of 5-6 liters, scissors, wire.

Master Class

Take a bottle and scissors.
Step 3 cm up from the bottom of the bottle and cut out a rectangular window.
Place a piece of plywood or linoleum exactly the size of the bottom of the bottle.
Take the wire, wrap the neck of the bottle.
Attach the feeder to the tree branch.

Birdseed

Making a feeder is great, but you need to know exactly what to put in it.

Birds can be fed raw seeds, millet, oats, millet, buckwheat, crumbs of stale white buns, small pieces of dried fruit, mountain ash, viburnum.

Birds cannot be fed crumbs of fresh white and rye bread, cakes, cakes, chips, salted and fried seeds, nuts and oatmeal.

Thanks to your care, the birds will survive in the winter. In turn, they will delight you in the spring with their songs. Birds are very important, as they not only delight the eye, but also perform a huge sanitary and health work!

Winter has always been and remains a difficult time for birds. From day to day, these little animals find it increasingly difficult to find food. Think about birds and place a hand-made feeder in your yard, because any materials at hand are suitable for working with, which we usually throw in the trash. The article will present ideas and photos ready-made solutions, for the implementation of which neither complex drawings nor any special skills are required.

DIY birdhouse

Think for yourself, you can't imagine all the splendor of the surrounding world without birds and perky trill. By their nature, these animals fill everything around them with harmony and life, and therefore even a tiny garden will look much more pleasant if there are birds in it.

By placing the feeder in the suburban area, you can daily observe the secret life of birds and fascinating bird bustle. Some of them will enter into fierce competition with other species, others will try to defend their own rights in the fight against congeners. But they all always carefully look around, so as not to miss the moment of attack by any predator.

A bird feeder can be assembled with your own hands from a variety of materials. However, there are certain general rules which must be observed during assembly:

It is most correct to place the feeder on the wall of outbuildings or directly on the branches of trees. In this case, the height of the placement should be at least half a meter, so that it is convenient for you to feed the birds, and so that cats cannot climb up to them.
For small birds, the nesting box should be of appropriate dimensions so that larger animals cannot get inside.
The corner walls of the finished structure should not be piercing and sharp.
Better if construction material, from which the bird feeder will be made, will have good resistance to adverse conditions and moisture. Otherwise, the birdhouse will not last long and will have to be replaced.
Provide special bumpers and a roof in the design of the feeder, which will protect food and birds from wind, rain and snow.
And most importantly - the feeder itself should always remain convenient for feathered animals, so that it is easy for them to take out the food!

Advice! Do not forget that the birds remember the place of constant feeding, and therefore they are ready to fly a long distance to the desired place - in our case, the feeders. Based on this, the birds should be fed daily, otherwise they may die!

Plywood bird feeder

Of course, the feeder can always be purchased ready-made in the store, but it is better to make it yourself, moreover, if it only takes a couple of hours. The plywood feeder can be made with a gable roof, flat or without it at all. You can also provide a dedicated hopper compartment if you know that you cannot accurately monitor the amount of feed inside. Naturally, drawings will be required for work, since a huge number of developments with ready-made dimensions and dimensions for cutting are presented on the Internet. You just have to decide on the solution you like.

An important point! Do not neglect the drawing: firstly, it will greatly facilitate and speed up the work. Secondly, this approach ensures that in the end you get exactly what is shown in the picture.

Determining with appearance future feeder, do not forget to take into account the bird population specifically in your region... After all, for example, pigeons are able to eat all supplies, leaving tiny titmouses without food. Based on this, it is recommended that the opening in the feeder be made in such a way that large birds could not get inside.

For work you will need:

A bar with a section of 20 by 20 mm;
Plywood sheets;
Sandpaper;
Hammer;
Water-based glue;
Electric jigsaw;
Nail.

Operating procedure :

First of all, all the elements are outlined on the plywood sheets, which are then cut out with a jigsaw. A square sheet of plywood with sides 25 by 25 cm will serve as the bottom of the trough. In this case, the dimensions of the roof should be made a little larger in advance so that water does not run down the walls during the rain.
To avoid burrs, the edges of the workpieces should be pre-processed with sandpaper.
We cut out 4 racks about 30 cm long from a bar.
If you want to make the roof a single-pitched flat, it is worth shortening a couple of bars by 2-3 cm.
We fix all the details with waterproof glue, and then fasten the structure with nails. We attach racks to the bottom of the feeder, to which we fix the sides.
We fasten the roof to the uprights with self-tapping screws.
We install the food container, add food and watch the bird feast.

Wood feeder: photos and ideas

The main advantage of a wooden bird feeder is that such a design perfectly keeps its shape and can serve for a long time, which in turn is explained by the considerable reliability and high characteristics of the tree itself. For self-assembly of the feeder, drawings will be required, as well as at least minimal experience in working with tools.

To assemble a wooden feeder, you will need a board with a thickness of about 18-20 millimeters.

Next, we will consider an option for a simple design, which can be easily done with your own hands, using a simple photo for the place of the drawing. For work, you will need: glue, a bar for racks 2x4.5 cm, nails, for the bottom a piece of plywood sheet measuring 25x25 centimeters, self-tapping screws and a couple of sheets of plywood 22x35 cm for the roof.

Work order:

First of all, of course, the sides and bottom of the structure are assembled. The bars, fitted to the dimensions of the lower part, are assembled for fitting, the end sides are coated with adhesive, after which we strengthen the fastening with self-tapping screws. As a result, we get a small frame. In this case, it is recommended to make two parallel sides a little more than the base, about 5 centimeters, so that in the future you can install perches to them.
We fix the bottom of the feeder to the finished frame and nail it down.

We attach 18-20 cm racks from the inside of the resulting structure.
We supplement the racks with rafters. To do this, we install a pair of bars at a right angle, strengthening the joint area with an additional bar. As a result, you will see a right angle with the same sides. Another similar detail is required.

An important point! Secure the blocks at right angles to the table, while it will be correct if the wide side is on the table, and the extra block is on top!

Next, we fix the rafters to the racks with the help of self-tapping screws.
We attach plywood sheets to the racks, which will play the role of a roof. If you have a wooden corner, you can use it by making a skate.
Do not forget about the elongated sides - sticking sticks or glazing beads to them, which will play the role of perches.

This way you can quickly and easily assemble the bird feeder with your own hands. The finished structure can either be hung on a wire by a hook by drilling several holes in the ridge, or placed directly on top of a post on the site. Inside the house, the food will be perfectly protected from rain and wind, moreover, several birds will be able to fly up to the feeder at once. Birds will love this cozy dining room!

Photo instruction

If there is a gazebo on your suburban area, then great idea will place a simple open feeder next to it. In this case, it will be sufficient to build a bottom and a side.

If you want to cover the feeder with varnish or paint, you should use only water-based formulations! This approach will keep the birds safe.

Birdhouse from a carton or bag of milk or juice

A beautiful bird feeder can also be made from such simple things as a bag or carton of juice or milk. And even a child will be able to make a birdhouse. For work you will need:

Stationery knife or scissors;
Juice or milk box;
Marker;
Wire or nylon rope;
Adhesive plaster.

The first step is to accurately mark and cut small holes on opposite sides of the box. The lower part of the window should be pasted over with adhesive plaster so that it is safe and convenient for the birds to fly out and take food from the feeder.

With the help of scissors we make tiny holes under the holes, here later we will insert the cardboard rolled up in a tube, left over from the holes made earlier. We put a rope or wire through the holes in the bent corners of the future birdhouse and tie it to a branch. Ready!

The finished feeder can be placed on a tree branch, since the structure will not sway much in the wind. Once again, feeding slots, which can be made on adjacent sides, not opposite ones, will contribute to this. It will be possible to fix the craft more strongly if you attach a wire to one of the sides of the feeder, tying it to a tree.

You can make a beautiful birdhouse with your own hands from several juice boxes. In this case, it is worth cutting off the third part from the first blank by cutting a hole for the birds in front - the element will become the bottom of the feeder or the feeding board. We cut the second workpiece along the sidewalls, leaving the upper part untouched. We combine the components in such a way that we end up with a triangle. You can connect the elements with tape or glue.

Craft from small plastic bottles

Option 1. Simplest

On both sides of the bottle, symmetrically cut a couple of small holes. What shape is up to you, they can be either rectangular or square, rounded or in the form of an arch. Leave the jumpers between the holes. The visor will protect feathered friends from the rain, you can make it by making a cut with an inverted letter "P", after bending the plate upwards.

The bottom of the hole in the new birdhouse should be covered with some material, be it tissue tape or adhesive plaster - this will remove the sharp edges of the bottle, allowing the birds to sit comfortably.

At the bottom of the bottle we make holes at the same level so that afterwards it is possible to place the stick in the horizontal plane - a kind of bird roost.

You can place the finished bottle feeder directly on the tree by wrapping the jumper with rope, tape or any other material, as in the photo.

Make holes in the bottle cap by inserting the ends of the twine into them and tying them in a knot, thus obtaining a loop with which you can conveniently fix the birdhouse on the branch of any tree in the yard.

Option 2. Bunker feeder

The bunker-type bird feeder is advantageous in that feed can be poured into it with a reserve, up to several days. At the same time, as the birds eat up some of the reserves, the feed will automatically be filled up.

This design requires a pair of identical bottles. The first one should be marked with a marker, then make small holes on the bottom, similar to the first feeder, and remove the upper third of the bottle. From above we make a couple of holes at the same level - in the future, twine or a tape will pass through them for hanging the feeder.

In the case of the second bottle, you need to cut several holes in the narrowest place - it is through them that the bird food will be poured out.

Do not make large holes, if necessary, they can always be expanded over time.

Finally, fill the bottle with food and screw the stopper back in place, then simply place in the rest of the first bottle. Ready!

Option 3. Spoon design

The hole is made inside the cork, where the twine is then inserted. After that, a couple more holes are made at the same level according to the dimensions of the spoon. The last hole is cut in the bottle itself above the deep bowl-shaped region of the spoon. At the same time, it should be slightly widened so that the birds can eat comfortably in the feeder. In the end, all that remains is to fill the birdhouse with food.

A little advice! Moisture can accumulate inside the craft over time. This can be avoided by a simple solution: using a tiny clove or a heated needle, punch a few holes at the bottom of the bottle - this will allow moisture to leave as it accumulates.

Craft from a 5-liter bottle

Surely everyone has at least one 5-liter plastic bottle that is idle. A bird feeder is quite simple to make with your own hands from this material. In addition, the volume of the bottle will allow you to place much more food for the birds inside, and well-made holes will make it possible to feed several animals at once!

Using a bottle as a birdhouse for birds is a fairly quick and easy solution that children can do too: just use a wire or tape to place the structure on the tree and place a small supply of food inside. Of the tools, you only need a clerical knife or pruner and, of course, the bottle itself.

It is worth making a hole depending on how you plan to place the feeder on the tree:

Vertically - 3 rectangles or a pair of square holes are cut at a distance of 5-7 centimeters from the bottom of the bottle;
Horizontally - a couple of large holes are cut from the side of the neck and bottom.

It is convenient to hang the future birdhouse for birds from a bottle by twine or wire by the neck. When choosing a horizontal option for placement, a couple of holes are made on the wall of the bottle, where a rope is then passed to tie it to a branch.

You can avoid swinging the craft if you place a quarter of a brick inside, which will make the feeder heavier. Load the food on top and there will be no rocking problems.

Bunker

If desired, a 5-liter bottle allows you to do it yourself with a bunker feeder. For this, in addition to the mentioned bottle, you will need a couple of one and a half liters, a rope, a stationery knife and a marker.

Work order:

First of all, we mark future openings for bird entrances at the bottom of the workpiece. The ideal option is considered one large and a pair of smaller holes. The first should fit a 1.5 liter bottle.

At the same time, it is better to cut a large hole in the shape of an inverted letter "P"; with this approach, the visor bent upwards will cover the birds from rain and snow. As in the case of 1.5-2-liter bottles, the bottom of the edge of the openings should be sealed with some material, for example, adhesive tape, to avoid injuring the birds on sharp corners.

We also make holes inside the smaller bottle where it touches the bottom of the 5 liter container. An additional hole will be required just above the indicated location. Through them, as it is eaten, the food will wake up into the feeder.
Inside the lid of a 5-liter container, a round hole must be made so that, when fully screwed in, the thread of the neck of the second bottle is visible from above.
We remove the top and neck of the second container to make a funnel. We put it on the neck of the bottle placed inside, and then screw it with a cork.
Thus, a beautiful and convenient bird feeder is obtained. All work is done simply and quickly with your own hands. It remains only to fill a new birdhouse with food and place it on a branch in the yard.

With a little imagination, you can always make interesting and unusual crafts for birds, which will not only become a real boon for birds, but also decorate your garden design well.

We use a shoebox

For self-assembly of a bird feeder, any material that is idle on the balcony can fit. Shoe boxes, food boxes and utensils can be used too!

Preference should be given to boxes and cardboard, laminated! Thanks to him, the finished feeder will be able to serve much longer.

The main advantage of the birdhouse out of the box is that the original blank already has a roof, walls and a bottom. You just have to make small holes on the sides of a rectangular or square shape.

For work you will need: scotch tape, a knife or scissors, as well as a nylon cord. As you know, cardboard cannot be called a durable material, especially when used outdoors. Therefore, it should be wrapped with tape, so that the feeder will be able to serve at least until the next season. After punching holes on the sides and fixing the new birdhouse to the cord on the tree, fill the container with food, and the birds will not be long in coming.

To prevent the craft from swaying strongly with the wind, it is worth placing some pebbles or sand on the bottom of the box.

You can do everything in a different way. The box lid is placed perpendicularly so as to act as a stern stand, while the second part will act as a roof and a side. In this form, the structure is glued with tape for greater reliability. A pair of hooks is made from a piece of wire to pierce the "ceiling" of the birdhouse. The hooks are twisted and bent from the inside. With the help of hooks, the bird feeder can easily be fixed on the branch, as shown in the photo. It remains only to put food and wait for feathered friends.

Video ideas

It might be useful to read: