The cost of equipment for opening a tire shop. How to open a tire shop. Tire business plan. Advantages and disadvantages of opening a tire fitting

Car service equipment sellers, by the nature of their activities, are constantly exploring the service market. According to them, it is precisely such a segment as truck tire fitting that is underdeveloped today. Workshops require equipment with special machines (tire changer, compressor, etc.) that are able to work with heavy tires, trained employees and a number of other features. Rather, it is this specificity that scares off entrepreneurs, and it is tire service, opened in the right place for trucks, that is a promising area for small businesses.

How to start opening a truck tire shop?
Stationary service or mobile?
What profit can the organizer of truck tire fitting expect?
What equipment to choose for truck tire fitting?
List of documents required for organizing a business and providing truck tire fitting services
Optimal taxation system

How to start opening a truck tire shop?

The beginning of any entrepreneurial activity is preceded by market research. Moreover, the demand for certain services directly depends on the availability of potential customers and the nature of their equipment. For example, if the car service will be near an agricultural enterprise, a quarry or a construction site that uses tractors, combines, heavy-duty vehicles, then you need to purchase a stand and equipment that can repair wheels up to 59″. If the future service serves cars passing on the track, a machine up to 29″ is enough. Experts also argue that you can start working at all without buying a tire changer, but using only hand tools and fixtures. Then the circle of customers will narrow down to those who have cars with tubeless tires. Working with hand tools also allows you to open a cargo mobile tire service.

Stationary service or mobile?

The optimal location for a workshop for trucks is:

parts of the highway before the exit-exit to large cities, near border control points;
the territory of motor transport or agricultural enterprises with special equipment;
sites near enterprises that have a large fleet of trucks.

The room must have a water supply and a network that gives a voltage of 380V. Tire changer and other equipment may require more than 220V power. Around the station there should be enough space for parking cars, their free entry and exit from the boxes.

There is another direction of this business - mobile tire fitting. It can exist independently, and can be as an additional service to work in the workshop. Mobile tire fitting provides for a capacious car so that it can fit equipment (stand) and wheels from cars.

What profit can the organizer of truck tire fitting expect?

In order to find out the level of income of a truck tire repair shop, we take the average economic results of enterprises in this industry. The main monthly costs include:

Rent payment.
Public utilities.
Staff salary.
Purchase of consumables.
Advertising.

The total amount of expenses does not exceed 3.5 thousand dollars. Every month, about 6 thousand dollars enter the cash desk of the enterprise. This means that the profit of the workshop before tax will be 2.5 thousand, and after - 2135 dollars, subject to work on the simplified tax system 15% of the difference between gross income and expenses.

What equipment to choose for truck tire fitting?

As mentioned above, great attention should be paid to the choice of equipment for tire fitting trucks. The future set of services that an entrepreneur can offer customers, and their quality, depends on its quality and technical characteristics. Below are the main positions that a businessman needs to complete:

The tire changer is the most expensive and necessary equipment in the workshop. Most of the models produced are designed for disc diameters from 16″ to 26″. The price for Chinese models starts at $5,000. Equipment from European manufacturers costs over $10,000. In the same price range there is also a machine that can work with car wheels whose diameter exceeds 56″. Its presence at the station will allow servicing agricultural machinery and TIR vehicles.
Tire balancing stand for trucks is also produced by Chinese and Western European companies. All of them are equipped with a pneumatic lifting mechanism that helps to set the wheel in working position. The stand costs from 3000 dollars.
The tire compressor is necessary for pumping wheels, as a source of compressed air for pneumohydraulic jacks and a pneumatic wrench. The compressor must be with a receiver of 500 liters. The optimum performance of the unit is 900 l / minute. In addition to Italian models, Belarusian equipment showed itself well.
Nutrunners that are used in the service can work on pneumatics or with the help of electricity. Working with compressed air tools can be difficult during the winter months. In addition, the eclectic tool itself is more convenient to use. Screwdrivers cost up to $1,000.

This is only the main, and the most expensive equipment. Mobile tire fitting may not carry all units without exception. The wheel can be repaired in the workshop and delivered to the customer at the point of failure. All small items, without which the truck wheel repair service cannot work, are taken into account in the table below.

Name of equipment	Quantity	Price, USD
Tire changer	1	8000
Tire balancing stand	1	3000
Pneumatic impact wrench	1	800
Tread cutter	1	500
Compressor	1	1800
Jack, lifting capacity 22 t	2	850
expander	1	650
Consumables (weights, patches)		1700
Wheel wrench	2	60
Vulcanizer	1	300
wrench	1	450
Socket set 1″ 24-41mm 8 pcs	1	200
Socket set 3/4″ 24-38mm 8 pcs	1	130
Cart	1	160
bottle jack	4	600
Wheel inflation gun	1	60
Connecting hoses for pneumatic equipment	1	180
Wheel testing bath	1	1800
Total		21240

In addition to the above costs, it is necessary to take into account the costs of delivery and installation of equipment. If you plan to open a mobile passenger or mobile truck tire fitting as an additional business, you will need to purchase a car to transport equipment to the customer’s breakdown site. Almost all of the above positions should have a mobile tire service.

Other expenses that accompany tire fitting as a business include advertising, bringing the workplace in line with labor protection standards, and automating the process. Each entrepreneur can plan these items of expenditure based on their remaining funds allocated for investment and their own preferences.

List of documents required for organizing a business and providing truck tire fitting services

The first question that you need to decide before going to the Federal Tax Service is the choice of legal form for your future workshop. If you do not have grandiose plans for the future (opening a network of workshops, developing other lines of business, etc.), then it is enough to draw up IP documents. For businessmen who expect to create a large company, it is better to choose an LLC. The registration procedure includes:

payment of state duty;
preparation of photocopies of the TIN and passport of the founders;
choice of OKVED (for this activity, this is the code OKVED 45.20);
writing applications for registration and choice of tax regime.

The founders of an LLC need to prepare papers confirming the presence of a legal address and a charter fund, as well as make constituent documents.

In addition, for the operation of a tire shop, it is necessary to obtain permits from Rospotrebnadzor (on compliance with sanitary standards), the fire inspectorate, local authorities, as well as sign agreements on garbage collection and cleaning / laundering of workers' overalls.

Additional licenses (cancelled more than 10 years ago) and permits are not required for the operation of tire fitting enterprises.

Optimal taxation system

Together with the documents for registering an enterprise, be sure to prepare an application for choosing a tax regime. It could be:

patent system or UTII (not allowed in all regions of the Russian Federation, this issue is within the competence of local authorities);
simplified regime (STS) - the best option for all the main criteria, you can pay to the treasury 15% of the difference between gross income and expenses or 6% of revenue;
the general taxation regime is the most difficult, an accountant is required for accounting, but it is chosen by large enterprises that cooperate with serious companies.

When deciding on the choice of tax regime, be sure to consult with an accountant.

Today, many people prefer to open their own business than to work in any enterprise. This is due not only to the fact that this occupation is more profitable, but also to the fact that today organizing your own business is not so difficult.

First you need to decide what exactly will bring a good income and is within the power of a future entrepreneur. Many young businessmen go bust precisely because they underestimate their capabilities and take on what is far away for them.

One of the most profitable and sought-after businesses is the work of your own tire shop. Even if we take into account the fact that quite a lot of them have already opened today, especially in big cities, they are not becoming less popular.

In addition, you can not repeat after everyone and think about how to open a truck tire service. Given Russian roads and the vulnerability of tires, this is the kind of business that will be most in demand. Having taken on such a case, it remains to solve some organizational issues.

Where to open a truck tire shop?

The location of the truck tire workshop plays a decisive role. It is from his correct choice that the profit of the entire enterprise will mainly depend. Naturally, it should be in close proximity to the roadway.

Her liveliness will only be an advantage. Before you open a truck tire service, you need to find out about the presence of competitors. It would be nice if there were no similar organizations nearby. Although sometimes even their presence may not be a hindrance. If you prove yourself on the good side, then there will be quite a lot of customers.

Rent or buy a tire shop?

When deciding where to open a truck tire service, you should also decide whether the premises for it will be rented or acquired. If possible, then, of course, you should consider the option of buying. In this case, it is no longer scary if at first the business does not work out.

In the case of rent, you will have to give a certain amount from the proceeds to the owner of the premises every month. But you don't need to spend a lot of money in the first place. Given that the cost of land today is quite high, you will have to fork out.

Tire workshop equipment

After the most suitable premises are selected, the necessary equipment for tire fitting should be purchased. Its list entirely depends on what kind of services a particular service provides. Naturally, no tire fitting is complete without wheel balancing.

In order to provide such a service, it is necessary to purchase a specialized stand, with the help of which a dynamic imbalance is removed. Be sure to buy a vulcanizer. In addition, you will need compressor and jacking equipment. A bath to check the wheels is also needed.

In addition to the minimum set of services, a tire shop can provide a wider range of services. If there are competitors, you should find out exactly what they do and try to expand your enterprise by providing what others do not.

Before you open a truck tire service, you need to decide not only on the choice of equipment in demand, but also on its quality. You should purchase only proven machines, tools and materials.

The work of the masters and, most importantly, its quality will depend on their condition. At first, you can, of course, pay attention to used equipment. However, later you still have to purchase new machines, because the equipment used for a long time will not last.

Recruitment

Particular attention should be paid to the selection of personnel. Of course, each entrepreneur approaches this issue differently, but if you want customers to be satisfied with the quality of work, you should choose personnel carefully.

The tire fitting business, reviews of which will primarily depend on specialists, will become the most profitable if the staff is highly qualified. You can find professional staff through ads on various websites and in newspapers. At the same time, you should not take the word of people who agree to work at this enterprise.

It is better if they prove their qualifications and work experience. Of course, such personnel will need to be paid a high salary, but in a good scenario, their work will pay off very quickly. Customers who are satisfied with the work of the staff will definitely come back.

Documents required to open a tire shop

To organize your business, it is not enough to have one desire, you need to draw up documents for opening a tire service.

First you need to register a legal form. If such a business is organized by an individual, then you need to open an individual business.

This is done in the tax office. All the necessary paperwork for opening a workshop is also drawn up there.

In addition, you will have to obtain sanitary and epidemiological documents. To do this, it is necessary that the room meets all the requirements and sanitary standards. Both internal and accounting logs of accounting and audits are prepared immediately.

Should I do the paperwork on my own or hire a professional?

The tire fitting business idea can be a profitable business, but not everyone can do everything on their own at once. If you have to deal with such a process for the first time, then it makes sense to contact a specialized company that will handle all the paperwork itself or competently advise on this matter. This will be much more efficient and save time and nerves. If there is experience in these cases, and the solution of such issues will not be a problem, then you can deal with the papers yourself.

Tire service advertisement

No business will thrive if it is not well advertised. People should learn as soon as possible about the opening of a new tire shop in a certain area. This is easy to achieve. First of all, it is necessary to think over an effective and noticeable sign that will draw attention to the workshop.

Truck tire fitting is a very profitable and profitable business. If everything is organized correctly, then income can be calculated after the first months of work.

Moreover, all the costs of its organization and the purchase of appropriate equipment will pay off after a few seasons of operation. Naturally, such optimism should only be hoped for if you have a properly drawn up truck tire fitting business plan. To delve into this section of business in more detail, today's article will be devoted to this particular topic.

What are its features?

This specialization is unique in that it does not require huge investments in equipment, boxes and execution of various documents. With several hundred thousand rubles on hand, you may well open your own truck tire fitting (mobile or even stationary).

Of course, in this case, one should not count on a high income, but there is some kind of profit, but still there will be. It is also worth noting the fact that truck tire fitting on wheels has a narrower specialization than passenger cars, so it will be much easier for you (or your employees) to work with the equipment, and, accordingly, it will not be difficult to control everything that happens.

At the initial stages, it is very important not to get lost in the calculation of profits and costs, and working with a specific specialization, you will always be aware of all the events. In other words, it is much easier to control the work of a truck tire fitting than to work with a universal service station, which provides not only car maintenance services, but also performs the function of a car wash or the same tire fitting. Yes, and you need to invest in such an enterprise much less money.

Truck Tire Fitting Business Plan – Company Registration and Obtaining All Appropriate Permits

In order to provide this type of service, you should initially open an individual entrepreneur or register as a legal entity.

The first option is most suitable for novice businessmen who have a small start-up capital for the development of their own company.

At the same time, legal entities are large firms that have their branches not only in one particular city, but in several regional centers at once. Of course, for this you need to have a starting capital of at least 10 million rubles.

About the license

As for the issue of licensing, owners of private tire stations should not go through this procedure. And all because the issuance of these documents was officially discontinued more than 10 years ago. On October 08, 2003, RosTest canceled the mandatory certification of tire fitting companies, and now in order to open your own company, you only need to have a minimum set of technical equipment and a small box, where the vulcanization and “re-shoeing” of the wheels will take place.

Is it worth it to get certified voluntarily?

Often large companies do this in order to confirm their status and the qualifications of their workers. It should be noted that this procedure costs no more than one and a half thousand rubles, so even start-up companies with a minimum initial capital can be certified. But do not expect that by paying 1,500 rubles the next day you will receive a certificate of high qualification of your workers.

This document is issued only after a thorough check of the company for the quality of tire fitting work. This includes screening of employees. For example, experts may ask how many weights can be hung on 1 wheel (the answer is no more than 3). And if the worker answers the questions incorrectly, the issuance of a certificate to your company may be in question. And no one will return the money that you paid initially (1.5 thousand rubles). Therefore, before passing the certification procedure, your employees must clearly know all the rules and requirements for the performance of work. Do not forget about the equipment, which should always be in good condition.

And yet this procedure is not obligatory, and firms need it only to emphasize their status.

About the room

When compiling a business plan for truck tire fitting, do not forget about exactly where your private workshop will be located. There are two options in total. This can be either a mobile tire fitting “on wheels” (as a rule, it is not suitable as the main source of income), or a stationary one. The latter type is the most common in Russia. It has its advantages, among which the main one is the availability of free space, which can always be expanded for a cafe, car wash or auto parts store. Yes, and it will be easier to work on such a tire fitting. What else should you pay attention to when organizing a private truck tire fitting? The business plan of your idea must necessarily include the correct layout of the premises.

What should be considered when planning a building?

First of all, you should think about the access roads to the tire fitting. And since your business specializes in servicing trucks, there are two main points to highlight here:

Firstly, the access roads should be as wide as possible so that a 20-meter truck can easily enter your site.
Secondly, truck tire fitting should never be located in the central areas of the city. Trucks are simply not allowed there because of the high tonnage. And it’s best to buy a box on the outskirts of the city and place billboards nearby with appropriate advertising so that drivers know where the tire shop is nearby.

As for the room itself, it should be clean, bright and dry. If in the future you expect your tire service to also provide service stations or car washes (which is also very beneficial for the company), make its ceilings high. Ideally, in order for a truck to safely drive into the box, you need to have a gate 3 meters wide and 4.5 meters high.

A mandatory criterion for the creation of truck tire fitting is also the availability of sources of electricity. Almost 99 percent of all your tools and devices will work on 220 volts, so sockets must be present in the box.

What equipment do you need for mobile and stationary tire fitting?

Here it is necessary to distinguish the following categories of equipment:

Tire stand. This special equipment is used to change tires or tubes on a wheel. An indispensable item for truck tire fitting. The design of such a stand includes a desktop, a mounting rack, as well as a tire mounting device with special control pedals. This device works from an electric and pneumatic network.

Balancing stand. Designed to detect wheel imbalance and eliminate possible deviations. How does this equipment work? First, a wheel is installed on the balancing stand, which is fixed on the machine shaft. Further, when the tire rotates, the electronic system reads all the parameters of the deviations, which are then displayed. In our case, to service cargo wheels, it is necessary to select a stand that would withstand a load of 200 or more kilograms (in the case of cars, it is enough to have a device that can withstand weight up to 60 kilograms).

Vulcanizer. This tool is also indispensable in the work of a tire fitting company. It is used to repair damage to tubes and tires. The vulcanizer works as follows: a special raw rubber patch is placed on the deformed section of the tire (other materials for tire fitting can also be used) and then the wheel is placed on the desktop, while it is fixed with a clamp. The vulcanizer during thermal action on the patch securely glues it to the chamber, thereby guaranteeing the tightness of the tire and stable air pressure in it for a long time. This equipment should be available from any company and it does not matter what kind of tire service it is - on wheels or stationary with its own separate room.

Other assistive devices. Such tools include various baths for checking the tightness of chambers and wheels, nitrogen generators, bead expanders for tire flanging, as well as compressors for inflating them and various materials for tire fitting.

How to choose the right equipment?

Considering the features of the balancing stand, we touched on one important point: tools for passenger cars differ significantly from their cargo counterparts in terms of technical characteristics, in particular, in terms of maximum load and weight.

All these differences are due to the fact that the diameter of the cargo wheel is several times larger than the size of the car. Therefore, equipment should be selected in such a way that it can serve tires with a diameter of up to 50 inches. In addition, the load wheels have a large curb weight, which is why the carrying capacity of these tools should be higher.

How much money do you need to open a truck tire shop?

As we have already noted, very little start-up capital is required to create a ready-made truck wheel service business. Taking into account the purchase of a box, the execution of all documents and the purchase of equipment, the total costs will be from 350 to 450 thousand rubles. This amount will be “repaid” to the owner after 1-2 seasons of work, and possibly even earlier. As you can see, tire fitting as a business is quite a profitable business. It is only necessary to organize it correctly, and then a normal profit can be expected in the coming days of work.

Conclusion

So, we looked at how to properly draw up a business plan for truck tire fitting and what points should be considered when creating a private workshop for servicing trucks and their wheels.

Business ideas related to cars attract high profits and quick payback. Tire fitting does not require significant investments and special qualifications of the staff, but has a pronounced seasonality of income. A sample tire fitting business plan will help you understand the many nuances of this type of activity.

[ Hide ]

Services

Basic tire fitting services:

tire inflation;
puncture repair;
seasonal tire fitting;
tubeless repair;
dismantling and mounting of wheels;
wheel balancing.

Additional services:

tire storage;
tire recycling;
checking and measuring tire pressure.

Types and types of tire fitting

There are two types of tire fitting:

stationary - the whole range of services is provided at a permanent place;
mobile - services are provided by a mobile workshop.

The division of tire fitting by type of machine:

passenger - passenger cars;
cargo - trucks and trucks;
specialized - work with exclusive and sports cars.

Relevance

The relevance of the business is due to the following factors:

stable growth in the number of cars (by 8-10% annually);
does not require time for promotion;
one of the most demanded among auto services;
tire fitting is easy to open from scratch, the business does not require special permits;
when opened during a period of a sharp increase in demand, the payback period will be about 4 months.

Description and analysis of the market

To organize your business, you should evaluate a business project according to the following criteria:

characterize the target audience;
determine the competitiveness of the planned business;
analyze the selected market segment;
assess risks and ways to minimize them.

The characteristics of the market are as follows:

at present, more than 20,000 tire fitting shops operate in Russia, which is why there is high competition;
tire fitting will be a profitable business for million-plus cities with positive dynamics in the number of cars;
tire fitting is a highly profitable activity (about 40%);
sales peaks occur in the off-season, when it is necessary to change tires winter - summer.

When planning a tire fitting business, it is important to choose the right season to open a workshop. It is optimal to open before the start of the “change shoes” season, when demand is as high as possible. When you start work in September, demand grows in October and reaches its peak in November, which means that it is profitable to open in autumn. During this period, about twenty customers visit tire fitting every day.

The target audience

The target audience depends on the type of tire fitting:

if the workshop specializes in cars, then their owners are potential customers;
a tire shop located in a residential area will be contacted by residents of this area;
the customers of the tire shop located on a busy highway are the owners of passing cars;
more than half of the clients are men aged 20 to 55.

Competitive advantages

The main competitive advantages of tire fitting include:

decent quality of services at a reasonable price;
high level of service;
positive customer feedback;
a wide range of additional services provided;
good location;
professional marketing campaign.

Distribution of customers by market share

Advertising campaign

Marketing tools to attract customers:

readable sign;
advertising on billboards located near the tire shop;
business cards and flyers with directions;
promotions indicating the timing of the event (change the radius of 16 "at a price of 15");
contextual advertising, groups in social networks;
corporate offer to taxi services;
bonuses for purchases with which you can pay off next time.

Step-by-step instructions for opening a tire shop

Step-by-step instructions will help you understand where to start opening a tire service. It will also explain whether it can be opened in the garage and what is needed to open it. An entrepreneur who wants to determine for himself whether it is profitable to open a tire shop must decide how much each type of service will cost.

After identifying the target audience and analyzing the market, the following steps should be taken:

Prepare a detailed tire fitting business plan.
Collect documents for opening a case.
Find a suitable space.
Procurement and installation of equipment and inventory.
Select staff.
Run an advertising campaign.
Open tire shop.

Documentation

The tire fitting license has now been cancelled. It is only required, there will be no problems with this. When registering, you must specify all types of activities of the organization.

Types of activities according to OKVED:

50.20.2 - "Maintenance and repair of other vehicles" (reflects the entire list of tire fitting services);
50.20.3 - "Provision of other types of vehicle maintenance services" (for a mobile tire shop).

The certificate will confirm the classification of the tire shop, the level of services provided and will positively affect its reputation.

Necessary documents for registering a business form (individual entrepreneurs and LLCs are suitable for tire fitting):

receipt of payment of state duty 800 rubles. for individual entrepreneurs (4000 rubles for LLC);
application in the form No. P21001 for individual entrepreneurs (No. P11001 for LLC);
application for the transition to the simplified tax system (otherwise it will be OSNO by default);
a copy of all pages of the passport;
charter of LLC;
a decision to open an LLC or a protocol if there are several founders (partners).

The minimum amount of the authorized capital of an LLC is 10,000 rubles.

Documents to get started:

certificate of registration of an individual entrepreneur or LLC;
certificate confirming ownership (or lease agreement).

The room and its location

Room requirements:

an area of at least 10 sq. meters;
availability of communications (water, electricity, heating);
a separate room (not in residential buildings);
the presence of ventilation;
safe lighting and electrical appliances;
the presence of a natural light source (window);
finishing of floors and walls with moisture-resistant and explosion-proof materials.

To reduce rental costs, you can open a tire shop in the garage. The benefit is obvious - the savings will be about 15 thousand per month. Its subsequent profitability depends on the location of the workshop. In turn, the optimal location of the workshop depends on the type of installation.

The best options for the location of the tire fitting:

area near active highways;
entry and exit from the city;
central, busy streets for passenger tire fitting;
visibility of the sign and premises from the side of a busy road;
proximity to gas stations, parking lots;
the proximity of warehouses and intercity routes for truck tire fitting.

Equipment and inventory

To increase the profitability of the enterprise, it is necessary to offer customers a wide range of services of the highest quality. Many entrepreneurs buy quality used equipment, which saves an impressive amount.

Calculation of the need for equipment:

The video shows an overview of tire fitting equipment. Filmed by the channel Svoe Delo - Svoi Biznes.

Consumables that are used in the tire fitting process:

stuffed loads;
harnesses;
valves;
caps;
chemicals to speed up work;
adhesive cargo.

Balancing stand from 35 thousand rubles. Compressor from 30 thousand rubles. Lift from 55 thousand rubles. Tire changer from 30 thousand rubles. Machine for straightening discs from 200 thousand rubles. Bath for checking tires and cameras from 6 thousand rubles.

Staff

For the work of a tire shop in one shift, two masters with a salary of 15 thousand rubles will be required. The function of the administrator and manager can be taken over by the organizer of the business, the accountant will be a freelancer. If necessary, it will be possible to increase the staff.

Master Requirements:

competence in matters related to installation;
good physical form;
performance;
attentiveness;
politeness;
responsibility.

Financial plan

On the network, you can download ready-made examples of a tire shop business plan for free. A profitable business can be opened with careful planning of the size of investments and forecasting of income.

Features of the financial plan:

a tire shop is opened in their own garage on a busy street, which helps to increase the profitability of the business;
garage area - 30 sq. meters;
form of ownership - individual entrepreneur with simplified tax system (tax is 15% on net profit).

How much does it cost to open a tire shop?

In order to determine how much it costs to open a tire shop, you need to sum up the following cost items:

funds for the purchase of equipment;
advertising expenses;
business registration costs;
amount of money for repairs.

Recurring costs

Monthly expenses during the period of work.

Income

Projected earnings.

Calendar plan

Calendar plan for the implementation of the business idea of opening a tire workshop.

Risks and payback

Due to the competent choice of the opening season, reaching the break-even point is possible within 2 months. And the payback period of the project is from 4 months. Mobile tire changers pay off faster than stationary ones, but bring less profit.

Types of risks and measures to prevent them:

High level of competition. In addition to specialized workshops, tire fitting services are provided by many car services with a comprehensive range of services, large service centers. To prevent this type of risk, you need to choose the right location for your workshop and a loyal pricing policy. It also requires a competent marketing campaign aimed at forming a circle of regular customers.
Low quality of service. The negligence of an employee directly affects the size of the company's profit. To minimize the risk, it is worth establishing a piecework wage system (percentage of revenue).
Equipment failure. Any malfunction can lead to a stop in the work of the workshop. Customers will not wait long and turn to another workshop. To minimize the consequences of this risk, it is necessary that at least one of the employees understands the technology. Part of the net profit should be directed to the formation of a reserve fund for the replacement of equipment.
periods of low demand. In the "off season" revenue may be so low that the company's activities will not be profitable. The formation of a reserve fund to cover losses and pay wages will also help here.

Video

Organization of seasonal tire fitting in 7 days, advice on implementing a business idea. Filmed by the channel Svoe Delo - Svoi Biznes.

The procedure for opening a truck tire fitting center includes several main steps. The consistent implementation of the items in the list below will allow you to organize this business without any problems.

IP registration. And what about without it! The government wants tax revenue from you, and you don't need to disappoint it. As a taxation system, the USN, or, in common people, "simplified" is most suitable for you. You don’t even have to hire an accountant, because the report is submitted once a year, and tax payments are fixed and made every quarter. An important nuance! Since 2003, private tire shops have been exempted from compulsory licensing. As they say: thanks for that - one less worry.
Rent or purchase of premises for a tire box. Naturally, it is best to rent a box that is already equipped with a pit and guides, so as not to invest in its “finishing” to the desired state. It is advisable to look a few steps ahead and, when equipping the premises, provide for its subsequent expansion to a car wash and a full-fledged service station. Be sure to equip the box with a sufficient number of standard sockets for connecting equipment.
Personnel selection. The ideal tire shop worker can be described in four words: honest, non-drinking, responsible, savvy. Hire workers who meet at least three of the above criteria. The number of workshop staff depends on the amount of work, but, as a rule, two or three people are enough.

Important! Remember that massive trucks will drive into the tire box, so the access roads must be of the appropriate width. Unfortunately, many tire shops for large vehicles often have extremely inconvenient access roads, which is why their traffic suffers.

Truck tire fitting equipment

The list of necessary equipment that should be equipped with a truck tire fitting box includes the following items:

Tire stand. Standard equipment used to change tires and tubes in wheels includes a work surface, a mounting stand and fixing elements for the tire, equipped with control pedals. It connects directly to the AC mains, without any adapters.
Balancing stand. It analyzes and eliminates wheel imbalance using an electronic programmable system. A detailed report on the identified shortcomings is displayed on the liquid crystal display.
Vulcanizer. This device is used to eliminate mechanical damage to cameras and tires. Simply put, the vulcanizer puts a patch of raw rubber on the pierced chamber, which is firmly glued under the influence of high temperature. It consists of a working table, clamps and a thermal chamber.
Various auxiliary items and tools. For example, baths for detecting damage in chambers, nitrogen generators, compressors for inflating wheels and tire flanging devices.

Selection of equipment should be carried out based on the characteristics of freight transport. Accordingly, it must withstand a lot of weight and serve large diameter tires.

Eventually

The two main questions that concern entrepreneurs opening a new business: how much can you earn, and when will it all pay off? With minimal investment (from 350-400 thousand rubles), the payback period will be no more than two seasons. The average net profit from the project will be about 50 thousand rubles per month. Not bad at all considering the ease of doing business. By opening two truck tire fitting points (if there is demand), it will be possible to periodically allow yourself sandwiches with black caviar for breakfast. Good luck in business!

It might be useful to read: