Equipment for the production of sip panels. Equipment for the production of sip panels Production line uip 6m 3

1 600 000 rub / set

Selling many...

People buy from us because there is always someone who does better than others!

Equipment from the manufacturer, for the production of sheet foam with a volume of 40 cubic meters. up to 100 cu. meters per shift.

The price of a line with a capacity of 20 cubic meters is from 990,000 rubles - up to 1,200,000 rubles, depending on the configuration.

The price of a line with a capacity of 40 cubic meters is from 1,300,000 rubles to 1,400,000 rubles, depending on the configuration.

The price of the line with a capacity of 100 cubic meters is subject to agreement between the parties.

Any equipment.

Always available.

A responsibility.

Decency.

Reliability.

Contact person: Vladimir Petrovich.

Water-dispersion paints (or water-soluble or latex paints as they are sometimes called) are among the most economical and easy-to-apply products.

The process of creating a water-dispersion paint consists of the following steps: combining and mixing an aqueous solution of a polymer dispersion with a filler and a pigment; dispersing the resulting pigment paste; introduction of a number of additives that bring the composition of the paint to the TU standard; filtration and packaging of the finished product.

Technological lines use a vacuum system for pumping and discharging raw materials, fully automatic lines. Electronic weighing sensors, monitoring, electronic control of all valves. The bead mill is the key equipment. The line is equipped with vacuum loaders, dissolvers, mills, cooling systems, filters, packaging equipment, and other equipment necessary to organize everything. production process. The line minimizes the influence of the human factor due to the high...

During installation, the panels must be fixed to a reinforced welded network. The panels are used in the construction of high-rise buildings, they are characterized by light weight, high utilization rate. The roll forming machine consists of decoiler, feed table, bending unit, punching system, cutting mechanism, hydraulic system, computer control system. The unit can be equipped with a mechanical and hydraulic decoiler

Email: [email protected]

Tel: 81086-18245344417

Skype (Skype): benban2013

Website: www.jzcljxcn.ru

Fiber cement panel production equipment

Raw material preparation

Low production costs thanks to highly efficient machines and technologies, it includes a sand grinding section, silos for...

The equipment is designed to produce various box-type panels for home, wall panels, door panels, rock wool sandwich panels, cold storage panels, steel sheet. The main advantage of the equipment is that it combines such technological processes such as punching, edge folding and shaping.

Equipment features:

The equipment adopts PLC and touch screen for easy operation.

Frequency stepless speed control. The molding speed can be adjusted.

Automatic punching, trimming, bending. Several panels of different lengths can be produced in one setting.

The width and thickness of the panels can be adjusted. The equipment is equipped with a slitting machine and a roll winder.

Technical specifications:

Equipment mounting dimensions: 6500*1300*1500mm

Main engine power: 7 kW (of which hydraulic power is 4 or 2.2 kW)

Equipment weight about 6000kg

Automatic drywall production line

Chinese factory specially sold automatic line for the production of drywall with a paper protective surface. Annual capacity is 500,000-1,000,000 sq.m and 2,000,000 sq.m per year.

line set:

1. raw material supply, mixing, molding

2. conveyor belt

3.automatic accelerator conveyor

4. drying chamber

high quality equipment at a low price. We offer delivery, commissioning, installation supervision, operator training. We will be very glad to receive your requests and wishes, preferably with your phone number and email address. Looking forward to cooperate with you!

The Chinese factory specially produces and sells equipment for the production of napkins, high quality equipment at a low price, 12 months warranty period, We offer delivery, commissioning, installation supervision, operator training. We will be very glad to receive your inquiries and wishes and look forward to cooperating with you!

Note: in the letter, please write your contact phone number to contact you, and the specific requirement for the equipment, for example: performance, etc!

Equipment for the production of facade fiber cement panels

Fiber cement board is mainly composed of cement and fiber, and cement is the main raw material. After the autoclave, these materials form a new building and decorative material.

Our fiber cement panel production line includes blending equipment, mixing machine, cutting machine, molding machine, etc.

Fiber cement board comes with such main features as light weight, high strength, fireproof, heat resistant, anticorrosive, good size and easy to recycle, etc. fiber cement panel is mainly produced in southeast China, but in recent years with the development of the economy and the development of construction. Our equipment technology is also developing faster, and right now we will not only satisfy domestic demand, but also expand our foreign markets.

Raw material preparation

Low operating costs thanks to highly efficient machines and technologies includes a sand grinding section,...

Chengdu Jin Bin LLC www.prof777.ru is one of the most dynamically developing companies supplying high-quality equipment and materials for construction and decoration directly from China. Our company was founded in 2005 in Chengdu, China.

The scope of our company:

Line for the production of corrugated board, metal tiles.

Supply of aluzinc (Aluzinc) with polymer coated from China.

Siding production line.

Line for the production of Knuf profiles for drywall.

Automatic line for the production of welded pipes.

Machine for the production of welded meshes.

Galvanized and painted steel coils for roll forming equipment.

Line for the production of drainage systems (drains)

Finished corrugated board and metal tiles of any thickness and any color, and other equipment, materials for construction and decoration. The company "Jin Bin" is ready to offer you transportation by rail(wagon or container) from K...

Panel sip - construction material, consisting of three layers, made using panel-frame technology. Such houses are much better than frame structures. And they are several times cheaper. Therefore, this material is very popular. Production of sip panels promising business, which pays off quickly and is easy to implement.

To create sip panels, you will need the following materials:

OSB (oriented strand board);
PSB (polystyrene foam suspension non-shrinking plate);
polyurethane adhesive.

Equipment and personnel for the production of sip panels

You can buy equipment for the production of sip panels in any major city in Russia. It can also be ordered from China. But the price will also be different. On average, you will have to pay about 2 million rubles. Chinese machines will cost a little less, but most often they are semi-automatic. As a result, additional employees will have to be hired.

How much money do you need to start a business

The most popular production complex is UIP-6M. In one shift, it is capable of producing up to 200 panels. This line includes machines for gluing, cutting foam, etc. A very profitable solution for manufacturing is to buy a ready-made complex. Having bought everything necessary equipment you can set up production on a large scale. And at the same time always remain in demand in the construction industry market.

In the table below, you can find a list of the necessary equipment and its approximate cost.

As mentioned earlier, it is better to buy a ready-made automatic complex for production. Of course, it will cost more, but such a purchase will have a positive effect on performance.

In order for the products that are produced to meet all the requirements of European standards, the manufacture must clearly follow all the rules. Therefore, there must be a specialist technologist in production. Also, the rest of the workers must undergo a short training to correct operation on the machines.

Sip panel production technology

Assembly of sheets. OSB sheets are laid on the machine table and glue and water are applied to them. After that, layers of PSB are laid, while applying several thin strips of polyurethane glue and water to the polystyrene foam sheet. Further, all layers are closed with an OSB sheet. It is worth noting that some complexes are capable of gluing several panels at the same time (usually up to three pieces), which lie on top of each other.
Gluing. Sheets are fed to the press via an automatic conveyor. With a force of 25 tons, the press compresses the vulture panels. This procedure is necessary so that the glue is evenly distributed. This procedure takes about 20 minutes (depending on the type of press: membrane-vacuum, pneumatic or hydraulic).
Cutting. After going through the first two stages, the main part finished products sent to the warehouse. But the other remains at the last stage of production. On some sip panels, as conceived by the customer, cutouts for doors or windows can be provided. And therefore, before sending them to the warehouse, docking grooves are made in the cut panels, using a knife or a thermal cutter.

How much can you earn?

If you want to make sip panels in a “handicraft” way, then it’s better not to start at all. Production will become profitable only if there is high productivity and the necessary equipment. After all, the production of panels takes place in a strictly limited time. The adhesive used hardens very quickly and can only be removed mechanically. You also need a special press. If you do not use it, then the glue will begin to “emerge” with foam and increase in volume.

Production is represented by assembly, gluing and cutting processes. Consider the phased technology for manufacturing SIP panels. The two main stages are carried out on the line, while cutting is carried out with the help of additional equipment.

Assembly of sheets. The first stage is divided into six steps:
laying the OSB sheet on the machine platform;

applying glue and water to the OSB sheet;

laying a layer of PSB on top of an oriented strand board;

parallel application of thin strips of polyurethane adhesive on expanded polystyrene;

spraying water over the glue;

coating of expanded polystyrene with a second layer of OSB.

Some lines allow you to glue several panels at the same time, which are placed one on top of the other. Then the first stage is repeated 2-3 times.
Panel gluing. On the this stage the products are transported by automatic conveyor to the location of the press (membrane-vacuum, pneumatic or hydraulic), which squeezes the SIP panels with a force of 15-30 tons so that the glue is evenly distributed between the parts. Gluing the panel takes about 10-15 minutes.
Panel cutting. After polymerization of the adhesive, the finished panels are sent to the warehouse. However, some of them are involved in final stage production process. In these SIP panels, according to the architectural plan, slots for windows and doors will be made. Cutting takes place using a special machine. Before being sent to the warehouse, docking grooves are created in the cut SIP panels using a thermal cutter or a knife.

It might be useful to read: