DIY plastic earrings. DIY earrings made of plastic. Rings from polymer clay photo

plastic fimo of red and green colors,
earring accessories: pins, hooks
and a little creativity!

How to make earrings from plastic - a master class with a photo

So, take the red plastic and roll it into a ball. Cut it into 2 equal parts with a knife and roll 2 balls out of them. We now have a base for the raspberries.

If you do not have a crimson color, it does not matter - this color can be easily obtained by adding a drop of black to the red and mixing the two colors thoroughly.

Form a thin "sausage" from the raspberry mass with your palms and cut it into many equal parts.

Now you can start modeling the berries directly. Roll from the resulting pieces into small balls with a diameter of 1-1.5 mm and attach them to the surface of the raspberry bases.

After the surfaces of both berries are covered, give the berries a slightly oval shape by rolling them in your palms. Do not press hard, otherwise they will become completely flat.

To sculpt leaves, form two identical green cakes and cut the leaves in them in a circle.

"Plant" the leaves on the berries and lightly press them in the middle with an even object so as not to leave roughness. Then fold the tips of the petals.

Insert hook pins in the center of the leaves

and send the plastic earrings (berries) to the oven for baking. Leave them there for half an hour at a temperature not exceeding 130 degrees Celsius, as written on the fimo package.

After the berries have cooled, coat them with fimo varnish (or simple acrylic craft varnish) and attach them to earring hooks.

Beautiful and mouth-watering earrings made of plastic "Malinka" are ready!

The earrings chosen in the store do not always meet all our requirements. Therefore, today, many needlewomen are interested in how to make beautiful earrings hand made- a win-win option, because you make them yourself, according to your taste. This clay jewelry will suit your style and emphasize your individuality.

Earrings in the form of fruits, vegetables and various berries look very unusual.

Such decorations are especially popular on sunny summer days. They will add lightness, airiness and charm to your look.

There are two types: the one that freezes and dries just in the air and the one that needs to be baked in the oven. Today we will be working with a material that will need to be dried in the oven.

To make plastic earrings in the form of juicy ripe yellow lemons, we need the following:

multi-colored polymer clay (white, transparent, yellow, green);
sandpaper;
blade;
rolling pin for rolling;
pins and toothpicks;
colorless varnish;
special fittings for earrings.

We make earrings from plastic: mix two clays - transparent and white until smooth, then gradually add yellow clay to this mixture until the color becomes as close to lemon as possible. We roll the resulting mass into a ball and divide it with a blade into ten equal parts, five in each half. Now we roll out the white plastic with a rolling pin into a strip. Its width should be equal to the height of the ball.

Cut into slices and insert them into the cut of the ball. We press through the middle of the ball carefully with a toothpick and insert a string twisted from clay into it. This is the heart of our lemon. Combine both halves of the lemon and wrap them on the outside with a thin layer of white plastic. This should be done very carefully and carefully so that no air bubbles remain between the layers, otherwise, when heated in the oven, they will burst or move away from each other.

Now is the time to make the rind from polymer clay... To do this, we need to mix yellow and transparent colors in the following proportion: for two thirds of yellow we take one third of transparent and quite a bit green. If you don't have green, you can easily get it by mixing blue plastic with yellow in a seven-to-one ratio. Roll out the clay into strips and wrap it around the lemon.

Then squeeze the lemon until you get a roll about half a centimeter wide.

The plastic earrings are almost ready. Cut the resulting roll into small pieces about 0.4 centimeters wide. Tighten each side of the lemon with yellow skin.

Using toothpicks and sandpaper, give the lemon the necessary roughness and uneven surface.

Carefully cut the lemon in half with a blade.

Use a pin or a needle to form a hole for the fittings.

We pass the pins into the holes. Plastic earrings are baked in the oven on a glass surface at a temperature of 100-130 degrees. Let the earrings cool down and thread the purchased accessories through the holes. We cover them with colorless varnish.

By the way, such wonderful lemons can also be used to decorate bracelets or as a necklace. They look fresh and bright.

You will need

Light-colored plastic;
The image of the earring, printed on the printer;
Formic alcohol;
Sharp blade;
Cotton wool.

Instructions

Roll out with a rolling pin, glass bottle, or other handy tool. Place the previously selected and printed image face down on the plastic.

Now saturate the cotton with ants and smooth it with a cotton swab with smooth light movements so that the whole image is transferred to the plastic. Be patient, because you will have to repeat this procedure several times, taking short breaks so that the newly translated image is absorbed into the plastic.

After the picture is finally transferred to a "cake" (it will take at least half an hour), carefully roll up the paper with a cotton swab.

Now cut off the excess with a sharp blade, giving the workpiece any shape you like. Make a hole in the upper part of the future earring and send your piece to the oven, where it should sit for about half an hour at a temperature of 130 ° C. A exact time you can find out the plastic exposure by reading the instructions attached to it.

After the required amount of time has passed, remove the earring and let it cool down. Once the earring has cooled down, cover it with a layer of varnish. Better use artistic acrylic varnish. If there is none, buy it, spare the money. After all, an unvarnished surface will wear out faster, and the image will be erased.

Do not forget that the second earring must be made in parallel with the first. Otherwise, spend at least an hour on the second earring. When the earrings are ready, put them on and enjoy wearing them.

Sources:

how to make plastic earrings with a picture

Thermoplastic, thermoplasticine, or just plastic - these are all names for polymer clay. Externally, plastic is very similar to the most ordinary plasticine known to all, the only difference is that the plastic hardens during heat treatment or simply in air. Thanks to this property of plastic, it is possible to make various souvenirs and unique jewelry from it.

You will need

- a set of plastics;
- collet knife with a set of blades;
- board for work;
- roller;
- tweezers;
- templates;
- an awl or toothpicks.

Instructions

The variety of accessories that can be made from this wonderful material is limited only by the flight of your imagination. All kinds of jewelry, beads, rings, and many other gizmos can be molded from plastic. It is convenient to have a box with polymer clay with you during any trips or travel, for example, if you are going to the country. After all, sometimes there are times when during the rain or on a hot afternoon. With the help of this material, you will spend interesting minutes, and maybe hours.

Plastics can be purchased at any art salon in your city. In addition, before you start working with this wonderful material, it is worth acquiring the necessary special tools. Although, when sculpting, you can use any available means, for example, using toothpicks, it is easy to make holes for beads.

There are a variety of techniques that can be used to create different pieces of jewelry. However, most of them are mixing of two or more colors. An unusual texture can be given with various materials, for example, by rolling the parts in coarse salt, and then washing it off after firing. Beautiful color combinations can be obtained by placing pieces of plastic on top of each other in layers, then roll them into a roll. If you cut it into pieces, you get a pretty pattern on the cut. Press the resulting roll onto a flat surface and shape.

Having blinded required amount beads, stick a toothpick into each of them, and bake the parts in the oven. Please note that the plastic is baked at 130 ° C. During this procedure, monitor the temperature very carefully, otherwise the plastic may start to burn, while giving off a pungent odor. Then let the product cool down, remove the toothpicks from the beads, if necessary, you can paint them with acrylic paints. It remains to string the beads on a thread or fishing line and attach the clasp. Voila! In just half an hour, you have created an exclusive piece of jewelry for yourself.

Polymer clay is a very convenient material for making jewelry with your own hands. This plastic mass lends itself well to sculpting. It comes in initially different colors, and is also easily dyed in the finished product. Depending on the type of material chosen, the workpieces are baked in the oven or hardened in the air.

DIY polymer clay beads

For this decoration, you need to make beads, which in their own way outward appearance resemble colored stones. Select several pieces of baked polymer clay that will go together in one bead. Knead two of them in your hands to make the clay even more plastic.

On glass or on an ordinary white sheet, roll out two crushed pieces with a rolling pin, turning them into rectangles of approximately the same size. Place two layers on top of each other. With a sharp knife, cut off the colored shavings from the rest of the pieces and place them evenly on top of the layers.

Roll the resulting layers with a rolling pin. Tear off small uneven pieces from the formation and form balls from them. Then roll each into a smooth bead. If you wish, you can not roll the bead, but leave the roughly shaped pieces of plastic.

Bake the resulting beads in the oven. Set the temperature according to the instructions on the polymer clay label. Holes in the beads can be made before baking with an awl, or drilled ready-made with a small drill.

Collect the resulting colored beads into a single piece. String them, one at a time, on a waxed cord of the appropriate color, and tie knots on both sides of the beads so that they are held in place. Connect the ends of the cord in beautiful knot... The beads are ready.

Beads can be strung on a thin satin ribbon.

Polymer clay earrings

Original earrings resembling bunches of mountain ash can be made of polymer clay. Knead a piece of orange clay in your hands and roll it into about forty small balls. Use the tip of a knife to make cuts in the center of each ball so that it looks like rowan berries.

Insert the hardware stud on the other side of the ball. Its cap should be immersed in clay, and the sharp tip should stick out. Use a toothpick to smooth the clay around the bonnet. Repeat this operation with each orange ball.

Knead a piece of green clay and roll it into a thin layer. Cut out a few leaves with a mold or knife according to the template. Make veins on the leaves with a knife or the sharp end of a toothpick and poke holes for the rings.

To make the leaves, you can use special silicone molds, which are sold in art stores.

Mash a piece of red pastel on a piece of paper. With a soft brush, tint the leaves along the edges and in the veins, as well as all the berries from one side. Bake the resulting blanks in the oven at the temperature indicated in the instructions.

After taking out the baked elements for the earrings, stick the clay berries with the sharp edge of the fittings into a piece of foam or crumpled foil. Drop in liquid brown acrylic paint in the notches on each berry and leave to dry.

Bite off the cloves with a pair of pliers so that the remaining tail is about 1 cm. Fold it into a loop with round-nose pliers. Attach chains 5-7 cm long to the hooks. Divide the berries in half and fasten them to the chains. Pinch the loops with pliers. Attach metal rings to the leaves and secure them on top of each bunch.

Polymer clay is a very malleable material and therefore allows you to make a wide variety of jewelry. Even novice needlewomen can make such a ring.

You will need

-polymer clay
-a piece of leather
-shapes (circle and star)
- the base for the ring
-glue

Instructions

On a clean surface, roll out clay about 5 mm thick and cut a circle out of the layer with a round mold. Now you need to cut a star out of the circle. Using a spatula, carefully remove the workpiece from the work surface and bake it in the oven as indicated in the instructions on the package from your clay.

Now we cut out the same star from the leather, adding 3 mm on each side. We grease the clay star with glue and glue it on the leather one. We put them on a round workpiece and press firmly so that the stars fit firmly into it.

Lubricate everything with glue. If the ends of the skin stick out somewhere, cut off the excess. We glue the base for the ring. Let it dry. Ready!

Helpful advice

To make the clay softer and easier to work with, knead it between your palms.
To easily cut any parts from the clay layer, put it in the refrigerator for 10 minutes. It will become harder.
It is advisable to work with clay with rubber gloves so as not to leave marks on the product.
If you want to add shine to the finished product, you can varnish its surface.

Sources:

Dana "s fashion blog

Nowadays, jewelry made of polymer clay, or, as it is also called, plastics, is in vogue. Many interesting and unique jewelry can be created from this material. Cherry earrings are easy to make and will add charm to the summer look of their owner.

You will need

Polymer clay of red and green colors,
Toothpicks,
Pins - 2 pieces of carnations,
Earring hooks 2 pieces,
Jumper rings for jewelry 2 pieces,
Stationery knife,
Oven

Instructions

For cherries, you need a piece of red polymer clay. Cut it off and divide it into four pieces with a knife. Mash each piece well and roll them into balls. Then pierce each ball with a toothpick and insert stud pins into them.

Cut a piece of green plastic and divide it in two. Knead, mold the leaves. Using a clerical knife, carefully draw the veins on both sides of the leaves. Also pierce the leaf closer to the edge with a toothpick and insert rings for jewelry.

Bake the sculpted pieces in the oven at 110-130 degrees. Place them on a regular ceramic hob to bake. If you are using a metal baking sheet, be sure to cover it with baking paper.

Bend the ends of the pins with round nose pliers to create a loop. Connect the pin and the earring hook on the ring, which is fixed in the leaf.

DIY polymer clay decoration. Polymer clay sausages

Polymer clay sausages- these are blanks for future jewelry, including beads, from which thin plate-drawings. "Sausages" also called "Canes" or "Keynes"(eng. cane).

We offer you a master class on making a very beautiful black and white sausages that can be used to create stylish and very original jewelry.

What you need:

- White and black polymer clay

- Knife or plaque with a blade

- Ruler

- Extruding press

Let's get to work:

Take two identical pieces of white and black clay and roll them into two squares 8 by 8 centimeters thickness of about 0.5 centimeters.

Place one layer on top of the other and then split them into two equal parts. Repeat this procedure. You should get something like this striped "sandwich".

Squeeze the resulting rectangle so that you get elongated round sausage.

Then use your palm to twist the sausage to get spiral... Simply pressing the sausage with your palm against the table, roll it in one direction. Do this very carefully so as not to damage the drawing.

If you cut the resulting product in half, the inside should be here's a picture:

Put the sausage inside clay press and squeeze out a thin long sausage.

In the context, it will look like this:

Slice the sausage thinly for drawing up:

As a result, you can use the drawing for a variety of original decorations:

The simplest polymer clay sausages master class (video lesson):

Polymer Clay Beads

Multicolored beads that can be used to make a variety of jewelry can be made from multi-colored polymer clay. If you do not know the peculiarities of their manufacture, it seems as if the drawing on these products was applied with the help of paint, but only multi-colored clay was used.

See for yourself.

What you need:

- Self-hardening polymer clay of 5 colors (in this case, white, gray, green, brown and yellow, but any others are possible)

- Knife or metal ruler with blade

- Rolling pin and plank for clay

- Rubber gloves to avoid fingerprints

Let's get to work:

In order to get a picture in the form of a chamomile, first you need to "compose" it from clay of different colors. Take white clay and roll it into a sausage about 8 centimeters and diameter 4 centimeters.

Roll out a gray clay plate about 2 millimeters.

Wrap the gray platinum about halfway around the white cylinder, cut off excess knife or ruler.

Take green clay, roll it into a plate and also wrap the first piece on top of the gray layer... Trim the resulting sausage, remove excess on the sides.

Use a ruler to make cuts on the white part of the part as shown. First in the middle, then two more cuts on the sides, so that there is approximately equal distance.

Then insert the cut rectangular pieces of the gray plate into the cuts.

Squeeze the resulting sausage, but not too tightly so that all the parts stick together and between them. the air layer disappeared... With your hands you can shape the shape of the future petal. The photo shows a petal in the form truncated triangle... The whole sausage was stretched in length by about 30 centimeters.

The length of the sausage depends on how many petals you wish to receive. For example, for this flower, the author of the master class is going to make 9 petals, so the length was 32 centimeters, that is 3.5 centimeters one petal. Divide the sausage into 9 pieces.

Let's start making the middle of the chamomile. Take yellow clay and roll out a sausage length 5 centimeters and diameter 2 centimeters.

Roll out brown clay into a plate about 6 mm and completely wrap the yellow sausage with it.

You should get something like this chamomile:

Fill in the blank spaces between the petals pieces of green clay:

Wrap the chamomile completely rolled out green plate.

Squeeze chamomile sausage so as to release all the air between the parts.

Then you can start slicing. If you have some of the chamomile sausage, save it for future products, wrapped in film without air access. Stick a ball of clay with daisies cut from sausage, then smooth.

Several options can be made beads:

Polymer clay decoration master class. Beads (video tutorial):

Hairpins made of polymer clay

Very simple hairpins can be made using invisibility and polymer clay... Here's one of the options:

What you need:

- Polymer clay of the desired color

- Hairpin-invisible

- Glue

Let's get to work

Roll out of a piece of clay small ball and then crush it with your fingers into a round plate.

Pinch the edges to get petal... Make as many petals as you like.

Connect all the petals together. If you have fired clay, bake the flower to harden the clay. Then you can stick it on the invisible one with using a piece of thick fabric.

Using this simple technique, you can make a variety of hairpins:

By the way, hairpins can be made using ready-made flowers and base accessories... You can take advantage of the master classes from the article Polymer Clay Flowers.

Here are some examples:

Polymer clay earrings

Very simple earrings can be made from clays, foils and wires... They are perfect for winter outfits.

What you need:

- Self-hardening polymer clay (white and pearlescent)

- Knife

- Accessories for earrings (wire, rings, hooks)

- Foil

- Molds

- Sequins

- Needle-nose pliers

Let's get to work

Roll out the clay into a plate of the desired thickness (approx. 3 mm). Divide the white piece into thirds. The fourth will be a pearlescent color. Of these you will cut mugs for details... Place foil on one sheet.

With the help of round molds with a diameter of about 5 mm cut out circles from each sheet.

Cut the wire into lengths approximately 7 centimeters... Place each circle on the wire. Do this very carefully so as not to poke a hole in the circle in an unnecessary place.

Wrap the shiny circle again foil.

Roll some of the white circles into sequins.

Make as many details as you like. The author of this master class used 13 pieces for each earring. Let the clay dry and harden.

Wire tip on every piece bend into a loop using needle-nose pliers.

On some details, shorten wire.

Pair the parts different colors and different lengths(one piece is left without a pair).

Connect the details of one earring using wire ring.

Attach accessories for earrings.

Original earrings made of polymer clay (video tutorial):

Polymer clay pendant

What you need:

- Self-hardening polymer clay (black)

- 2 sheets aluminum foil(golden and silver)

- Drop shape

- Clay cutting blade

- Shiloh

- Pasta machine or rolling pin with a plate for rolling out a thin layer

Let's get to work

Roll the foil into tight ball... This will be the centerpiece of our pendant. Such a core will allow the product to not be too heavy. You can make the center from clay, but if you wear such a pendant for a long time, it will remain on your neck imprint from the chain.

Using a pasta machine or manually roll out thin clay slab and cut out an even circle. Wrap it in a foil ball. Remove excess clay.

Once the balloon is ready, pierce it pin for jewelry through.

Roll out a sheet of black clay about 3 mm, cover it with a layer of very thin gold foil and extrude with a drop part shape.

Then start attaching the drops one at a time to round base future bumps. Don't worry if thin layer gold will crack, it will give a special stylish look to your product.

Cover with drops all bump to the very end.

If you are using baked clay, bake the product at recommended temperature... Once it has cooled down, attach the chain.

Polymer clay modeling. Pendant (video tutorial):

Polymer clay beads

We invite you to get acquainted with unusual technique creating jewelry using polymer clay, balls and wire in the following example of creating beads. You can make whole sets in the same way: beads, earrings, bracelets, pendants.

What you need:

- Self-hardening translucent polymer clay (several shades)

- Small rubber balls

- Thin wire

- Scissors

- Accessories for jewelry (pin with an eyelet, chain)

- Pasta machine or rolling pin with a plate for rolling out a thin layer

- Pin

Let's get to work

1. Inflate the rubber balls desired size... You can make balls of different sizes, as shown in this master class, or the same. The number of balls will determine the size of the item.

2. Twist several segments wire as shown in the photo to make a loop.

3. Put a loop on the ball in the place where it is tied knot.

4. Wrap the wire around the ball to make net.

5. You should have a wrapped ball wire mesh.

6. 7. Remove excess wire ends with scissors.

8. Roll out very thin sheet made of translucent polymer clay.

9. Completely wrap a sheet of clay around the ball with wire mesh.

10. 11. Pop the ball inside with a safety pin and pull it out out through a small hole.

12. Press the clay inward to make a little crumpled sphere... Do this very carefully so as not to damage the thin layer of clay.

Let the clay cure thoroughly, and then apply with the help of special paints desired drawing.

Polymer clay video. Beads

Polymer clay bracelet

This original bracelet is made using an old glass dish with floral embossed pattern. Perhaps something similar can be found in your kitchen.

What you need:

- Baked polymer clay (desired color)

- Metal molds for the bracelet

- Glass saucer with relief

- Nail polish in different colors

- Satin wide ribbon

- Scissors

- Pasta machine or rolling pin with a plate for rolling out a thin layer

- Glue

Let's get to work

1. Roll out the clay into a long strip approximately 0.5 centimeters... Use a saucer to paint. You can use any molds that you have in stock.

2.Use scissors or a clay blade to cut a flat rectangular strip width, which is slightly larger than the width of the metal mold for the bracelet.

3. Wrap clay around the metal mold.

4. Fold the edges of the clay inward... Then bake the product until the clay is completely hardened.

5. Optionally, you can paint the product nail polish... To hide the metal shape inside, you can glue satin ribbon.

DIY polymer clay. Bracelet (video tutorial)

Polymer clay ring

We offer you a master class on making a very simple but original rings made of polymer clay in the form of a bow.

What you need:

- Polymer clay (desired color)

- Blade

- Pasta machine or rolling pin with a plate for rolling out a thin layer

- Sequins

Let's get to work

Knead the clay in your hands to make it more pliable, and roll out a plate about 0.5 centimeters.

Use a blade or knife to cut details for a bow: two rectangles (one wider, one narrower). Wrap the edges of the longer one inward, and wrap the other rectangle around the first part.

You should get something like this bow:

Mold from clay ring, then attach a bow to it. To make the ring fit you, you need to wrap it around first own finger and fit to the desired size. Don't worry if your fingerprints or bumps remain on the ring. By using sequin this problem will be masked.

Cover the ring sparkles and let it harden.

Polymer clay for beginners. Ring (video tutorial):

Rings from polymer clay photo

Each of us is a fashionista at heart, each of us is not indifferent to all kinds of accessories, be it earrings, rings, beads, key chains. But the easiest way is to go to the store and buy finished products... But what if you try to do this with your own hands? In case of ultimate success, you will kill two birds with one stone - you will become the owner of exclusive earrings and at the same time save on the purchase of store jewelry. True, if you decide to do these things cute to a girl's heart and eyes, be prepared for the cost of consumable will be quite large. First of all, this concerns the purchase of polymer clay, sometimes it is also called plastic, in any case, do not fall into a stupor - these concepts are completely identical. Plastic is known for its production: Fimo, Cernit and Sculpey.

Materials and tools

So what do we need to get started?
First of all, these are several colored blocks of plastic, for my work I used plastic from the firm "Fimo". Plastic from this manufacturer, by the way, German, is distinguished by its durability. Available in a wide range of colors, from classic models to glowing in the dark. So, we will make earrings in the shape of grapes, so for our work we need plastic blocks of two colors: lilac and green. The first color will be used to create the berry itself, and we need green to decorate the leaves.

Next, we will deal with the organization of our workspace: we need any surface that will quite calmly withstand the impact of a knife - take a durable glass, a rectangular piece of tile - in a word, the most dense material. Ideally, the surface is considered most suitable if the clay does not stick to it.
For direct cutting of plastic, you will need a knife - it is best to buy a special clerical knife, by adjusting the length of the blade, you can cut off the required volumes of clay. I recommend the readers of MirSovetov to get a pair of knives. Let me explain why: in your work you will use several colors of plastic, and these colors are often contrasting, so in order not to stain the light plastic with the blade of a knife, it is worth buying knives for light clay and for dark one separately.
Do not forget about hand protection, it is best to use disposable gloves, they will protect your hands and, at the same time, you will not lose sensitivity to the material in them.
Directly for heat treatment, you will need the oven itself and any surface suitable for "baking": it can be a baking sheet, a wooden board or a plate. If you prefer a metal surface, be sure to cover it with baking paper. This is to ensure that your products do not overheat and burn.

Making earrings

The process of making berries itself is quite simple: you take the pieces of plastic you need, carefully cut off the pieces you need for work with a clerical knife.

In order for your sculpting to be neat, as mentioned above, use gloves. Roll out the plastic and slowly mold the berries for the grapes, make sure that they are all the same size.

Next, we turn to green clay - roll out a flat plate, carefully cut out the outline of the leaf with the same clerical knife.

Also, no less carefully, we combine the plastic of two colors: put a green leaf on a lilac base. That's all - the main work is done.

Then comes the stage of "baking" - we put the future grape on paper and send it to the oven.

Keep track of the time, remember that you should not keep polymer clay in the oven for more than half an hour. It took 30 minutes - we take out our work of art and fix it with varnish. For the coating, acrylic glossy varnish is most often used, designed specifically for working with plastics (in this case, the Sonnet varnish was used).
After the work is completely dry, you can proceed to the most pleasant stage - creating the earring itself. To do this, you need hardware, which can be found in stores that sell sewing supplies. In order to get a full-weight "grape" earring, we take earrings, special hook-shaped devices. We put the resulting berries on them, that's all - the extraordinary earrings, made with our own hands, are ready. You can rest assured of their durability, the lacquer coating reliably protects the earrings.

It might be helpful to read: