Locksmith of emergency recovery work. Emergency recovery locksmith ETX What an avr locksmith should know 4 grade
This job description has been translated automatically. Please note that automatic translation does not provide 100% accuracy, so there may be minor translation errors in the text.
| Instructions for the position " Locksmith of emergency recovery work of the 4th category"presented on the site meets the requirements of the document -" REFERENCE qualification characteristics professions of workers. Issue 87. Housing and communal services settlements... (Taking into account the annexes approved by: order of the State Committee of Ukraine for Housing and Utilities Sector 09.07.2004 N 132, order of the State Housing and Communal Services of Ukraine 22.11.2004 N 210, order of the Ministry of Housing and Communal Services 08.12.2009 N 387, by order of the Ministry of Housing and Communal Services of Ukraine on December 23, 2010 N 464) ", which was approved by the order of the State Committee for Construction, Architecture and Housing Policy of Ukraine on June 14, 1999 N 144. Approved by the Ministry of Labor and social policy Ukraine. The status of the document is "valid". |
|
Preface to job description
0.1. The document comes into force from the moment of its approval.
0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
0.3. The document has been agreed upon: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
0.4. Periodic check of this document produced at intervals not exceeding 3 years.
1. General Provisions
1.1. The position "Locksmith of emergency recovery work of the 4th category" belongs to the category "Workers".
1.2. Qualification Requirements- complete or basic general secondary education. Vocational education. Training. Work experience as a locksmith in emergency recovery work of the 3rd category - at least 1 year.
1.3. Knows and applies in activities:
- water supply scheme of the site;
- rules for reading complex drawings and sketches;
- drawing up diagrams, sketches in kind;
- rules of detailing;
- methods of plugging sockets manually and using a pneumatic tool;
- the structure of the device for plunging under pressure;
- rules and methods for disconnecting frozen pipelines and their heating;
- layout of the sewerage network of the area in which the work is carried out;
- technology of cleaning the sewer network and collectors in a hydraulic way and removing blockages with a flexible shaft;
- main equipment and mechanisms used during the repair and cleaning of sewer pipelines and structures;
- rules for performing earthworks in dry soils;
- the procedure for performing work associated with increased danger.
1.4. A locksmith of emergency recovery work of the 4th category is appointed and dismissed by order of the organization (enterprise / institution).
1.5. Locksmith of emergency recovery work of the 4th category reports directly to _ _ _ _ _ _ _ _ _ _.
1.6. Locksmith of emergency recovery operations of the 4th category supervises the work of _ _ _ _ _ _ _ _ _ _.
1.7. A locksmith of emergency restoration work of the 4th category during his absence is replaced by a person appointed in accordance with the established procedure, who acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.
2. Description of work, tasks and duties
2.1. Performs work on cleaning the sewer network and collectors hydraulically at a depth of 12 m.
2.2. Eliminates blockages in pipes with a flexible shaft, water jet washout and hydraulic back pressure method using mobile auto pumps.
2.3. Prepares rope and winches with a lifting capacity of up to 1 t, metal balls and cylinders of a given specific gravity.
2.4. Repairs sewerage networks under the guidance of a highly qualified locksmith.
2.5. Carries out repairs of equipment and mechanisms used during cleaning.
2.6. Welds plastic pipes.
2.7. Knows, understands and applies the current regulatory documents concerning his activities.
2.8. Knows and complies with the requirements of regulatory enactments on labor protection and environment, complies with the norms, methods and techniques for the safe performance of work.
3. Rights
3.1. A locksmith of emergency recovery work of the 4th category has the right to take actions to prevent and eliminate cases of any violations or inconsistencies.
3.2. A locksmith of emergency restoration work of the 4th category has the right to receive all social guarantees provided for by law.
3.3. A locksmith of emergency recovery work of the 4th category has the right to demand assistance in the performance of his job responsibilities and the exercise of rights.
3.4. A locksmith of emergency recovery work of the 4th category has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision of necessary equipment and inventory.
3.5. A locksmith of emergency recovery work of the 4th category has the right to get acquainted with the draft documents relating to his activities.
3.6. A locksmith of emergency recovery work of the 4th category has the right to request and receive documents, materials and information necessary for the performance of his official duties and orders of the management.
3.7. A locksmith of emergency restoration work of the 4th category has the right to improve his professional qualifications.
3.8. A locksmith of emergency recovery work of the 4th category has the right to report all violations and inconsistencies identified in the course of his activities and make proposals for their elimination.
3.9. A locksmith of emergency restoration work of the 4th category has the right to familiarize himself with the documents defining the rights and obligations of the position held, the criteria for assessing the quality of the performance of official duties.
4. Responsibility
4.1. A locksmith of emergency recovery work of the 4th category is responsible for non-fulfillment or untimely fulfillment of the duties assigned by this job description and (or) non-use of the granted rights.
4.2. A locksmith of emergency recovery work of the 4th category is responsible for non-compliance with the rules of internal labor regulations, labor protection, safety, industrial sanitation and fire protection.
4.3. A locksmith of emergency recovery operations of the 4th category is responsible for disclosing information about an organization (enterprise / institution) related to a trade secret.
4.4. A locksmith of emergency recovery work of the 4th category is responsible for non-performance or improper performance requirements of internal normative documents organizations (enterprises / institutions) and legal orders of the management.
4.5. A locksmith of emergency recovery work of the 4th category is responsible for offenses committed in the course of his activities, within the limits established by the current administrative, criminal and civil legislation.
4.6. A locksmith of emergency recovery work of the 4th category is responsible for causing material damage organization (enterprise / institution) within the limits established by the current administrative, criminal and civil legislation.
4.7. A locksmith of emergency recovery work of the 4th category is responsible for the misuse of the granted official powers, as well as their use for personal purposes.
We bring to your attention a typical example of the job description of an emergency recovery locksmith, sample of 2019. A person with primary or secondary vocational education, special training and work experience can be appointed to this position. Do not forget, each instruction of a locksmith of emergency recovery work is handed out against a receipt.
This section provides typical information about the knowledge that an emergency recovery locksmith should have. About duties, rights and responsibilities.
This material is included in the huge library of our site, which is updated daily.
1. General Provisions
1. The locksmith of emergency recovery works belongs to the category of workers.
2. A person with secondary professional education or initial vocational education and special training and work experience ________ years.
3. A locksmith of emergency recovery works is hired and dismissed by the director of the organization on the proposal of the head of production (site, workshop)
4. The locksmith of emergency recovery work should know:
a) special (professional) knowledge of the position:
- device of drainage mechanisms and pneumatic tools;
- ways to eliminate malfunctions in the operation of mechanisms and pneumatic equipment;
- frequency and rules of preventive repair of tools and devices;
b) general knowledge of an employee of the organization:
- rules and norms of labor protection, safety engineering, industrial sanitation and fire protection,
- rules for using personal protective equipment;
- requirements for the quality of work (services) performed, for the rational organization of work in the workplace;
- types of marriage and ways to prevent and eliminate it;
- industrial signaling.
5. In his activities, an emergency repair locksmith is guided by:
- the legislation of the Russian Federation,
โ The charter of the organization,
- orders and orders director of the organization,
- this job description,
- the rules of the internal labor regulations of the organization,
โ __________________________________________________.
6. A locksmith of emergency recovery works reports directly to a worker with a higher qualification, the head of production (site, workshop) and the director of the organization.
7. During the absence of an emergency repair locksmith (business trip, vacation, illness, etc.), his duties are performed by a person appointed by the director of the organization on the proposal of the head of production (site, workshop) in the prescribed manner, who acquires the corresponding rights, obligations and bears responsibility for the performance of the duties assigned to him.
2. Responsibilities of an emergency repair locksmith
The duties of an emergency repair locksmith are:
a) Special (professional) job responsibilities:
- Carrying out works on the repair of water supply networks under the guidance of a mechanic of higher qualifications: cleaning and removing blockages of sewer networks, excavation of canals and pits and their fastening; caulking and sealing of joints, filling and caulking with lead, sulfur alloy or cement of pipe sockets.
- Performing simple plumbing renovation works.
- Delivery and laying of pipes and fittings.
- Work on manual drainage mechanisms and pneumatic tools.
b) General job responsibilities of an employee of the organization:
- Compliance with the Internal Labor Regulations and other local regulations of the organization,
- internal rules and regulations of labor protection, safety, industrial sanitation and fire protection.
- Execution within employment contract orders of employees, by whom it was repaired in accordance with this instruction.
- Carrying out work on acceptance and delivery of the shift, cleaning and washing, disinfection of serviced equipment and communications, cleaning of the workplace, devices, tools, as well as keeping them in proper condition;
- Maintenance of established technical documentation
3. Rights of an emergency repair locksmith
A locksmith of emergency recovery works has the right to:
1. Submit proposals to the management:
- to improve the work related to the provisions of this instruction responsibilities,
- on bringing to material and disciplinary responsibility of employees who have violated production and labor discipline.
2. Request from structural units and employees of the organization information necessary for him to carry out his job duties.
3. To get acquainted with the documents defining his rights and obligations in the position held, the criteria for assessing the quality of the performance of official duties.
4. To get acquainted with the draft decisions of the organization's management concerning its activities.
5. Require the management of the organization to provide assistance, including the provision of organizational and technical conditions and the execution of the established documents necessary for the performance of official duties.
6. Other rights established by the current labor legislation.
4. Responsibility of the emergency repair locksmith
An emergency repair locksmith is responsible in the following cases:
1. For improper performance or non-performance of their official duties provided for by this job description - within the limits established by the labor legislation of the Russian Federation.
2. For offenses committed in the course of their activities - within the limits established by the current administrative, criminal and civil legislation of the Russian Federation.
3. For causing material damage to the organization - within the limits established by the current labor and civil legislation of the Russian Federation.
The job description of an emergency repair locksmith is a sample of 2019. Responsibilities of an emergency recovery locksmith, rights of an emergency recovery locksmith, responsibility of an emergency recovery locksmith.
1. Locksmith of emergency recovery work in the gas sector of the 4th category belongs to the category of workers.
2. A person with secondary vocational education or primary vocational education and special training and work experience of one year or more is accepted for the position of an emergency repair locksmith in the gas sector of the 4th category.
3. A locksmith of emergency recovery work in the gas sector of the 4th category is hired and dismissed by the director of the organization on the proposal of the head of production (site, workshop).
4. Locksmith of emergency recovery work in the gas sector of the 4th category should know:
a) special (professional) knowledge of the position:
Device, rules technical operation and repair of household gas equipment, apartment heating boilers with automatic equipment, cooking boilers and group cylinder installations of liquefied gas;
Rules for putting gas into the network, installation and connection to the network gas equipment;
Layouts of gas pipelines and communications;
Boiler supervision rules for the design and safe operation of tanks and other pressure vessels;
Rules for conducting emergency repair work on the routes of existing low and medium pressure gas pipelines with a diameter of up to 500 mm inclusive;
Rules for purging, steaming and testing gas pipelines for tightness;
Arrangement of temporary bypasses on emergency gas pipelines;
Repair work on socket joints of cast iron gas pipelines and methods for installing couplings on gas pipelines;
Technical conditions for the installation and operation of underground gas pipelines;
b) general knowledge of an employee of the organization:
Rules and regulations of labor protection, safety, industrial sanitation and fire protection,
Rules for the use of personal protective equipment;
Requirements for the quality of work (services) performed, for the rational organization of work in the workplace;
Types of marriage and ways to prevent and eliminate it;
Industrial signaling.
5. In his activity, the mechanic of emergency recovery work in the gas sector of the 4th category is guided by:
RF legislation,
The charter of the organization,
By orders and orders of the director of the organization,
This job description,
The internal labor regulations of the organization,
6. Locksmith of emergency restoration work in the gas sector of the 4th category reports directly to a worker with a higher qualification, the head of production (section, workshop) and the director of the organization.
7. During the absence of an emergency repair locksmith in the gas sector of the 4th category (business trip, vacation, illness, etc.), his duties are performed by a person appointed by the director of the organization on the proposal of the head of production (site, workshop) in the prescribed manner, who acquires relevant rights, obligations and is responsible for the performance of the duties assigned to him.
II. Job responsibilities
The duties of an emergency repair locksmith in the 4th category gas facilities are:
a) Special (professional) job responsibilities:
Performing emergency repair work on existing low and medium pressure gas pipelines with a diameter of up to 500 mm inclusive.
Removing gas condensate from condensate traps.
Lubrication of valves, testing of gas pipelines for tightness, purging and steaming them.
Digging pits along the route of underground gas pipelines to eliminate the accident.
Carrying out repair work to restore household gas equipment, cooking boilers, group cylinder installations of liquefied gas, as well as gas equipment installed on gas-consuming furnaces and other units of industrial, municipal and agricultural enterprises and institutions.
Putting gas into the network and connecting gas equipment to the network.
b) General job responsibilities of an employee of the organization:
Compliance with the Internal Labor Regulations and other local regulations of the organization,
Internal rules and regulations of labor protection, safety, industrial sanitation and fire protection.
Fulfillment of the orders of employees within the framework of the employment contract, by whom it was repaired in accordance with this instruction.
Carrying out work on acceptance and delivery of a shift, cleaning and washing, disinfection of serviced equipment and communications, cleaning the workplace, devices, tools, as well as keeping them in proper condition;
Maintenance of established technical documentation
Locksmith of emergency recovery works, 2nd category
Description of works.
1. Execution of works on the repair of water supply networks under the guidance of a mechanic of higher qualifications, cleaning and elimination of blockages of sewer networks, excavation of canals and pits and their fastening; caulking and sealing of joints, filling and caulking with lead, sulfur alloy or cement of pipe sockets.
2. Performing simple plumbing repairs.
3. Delivery and laying of pipes and fittings.
4. Work on manual drainage mechanisms and pneumatic tools.
Must know:
The device of drainage mechanisms and pneumatic tools;
- ways to eliminate malfunctions in the operation of mechanisms and pneumatic equipment;
- the frequency and rules of preventive repair of tools and devices.
Locksmith of emergency recovery work, 3rd category
Description of works.
1. Execution of works on the repair of water supply networks, caulking, filling with lead or sulphurous alloy of sockets of pipes of small diameters up to 300 mm.
2. Determination of malfunctions of water columns and fire hydrants on the network.
3. Heating of metering pipelines in various ways.
4. Switching on and off the inputs of networks of small diameters according to sketches and diagrams.
5. Production of hydraulic testing of the input of small-diameter networks.
6. Cutting of pipes of all diameters with rollers, pipelines with manual drive.
7. Caulking and pouring with lead and various substitutes for pipe solutions under the guidance of a more qualified locksmith.
8. Cleaning the sewer network by a hydraulic method, removing blockages in pipes with a flexible shaft to a depth of 7 - 8 m.
9. Preparation of inflatable balls, disks of the required specific gravity and winches with a lifting capacity of 0.5 tons.
10. Checking the suitability of the rope for work in waste water.
11. Removing sediment from underlying wells.
12. Excavation work with the installation, driving and excavation of metal sheet piles manually or mechanically using water-lowering devices.
13. Installation of plastic pipelines, including flared connections with rubber rings.
Must know:
The device and principle of operation of valves, hydrants, standpipes, pipelines, manual hydraulic presses and pressure gauges;
- rules and methods for sealing sockets with lead and lead substitutes;
- methods for determining the presence of gas in wells;
- method of hydraulic testing;
- ways to eliminate damage to pipelines, fittings, as well as ways to eliminate water leaks;
- Methods for chlorination of pipelines with chlorine and bleach;
- reading simple drawings, diagrams and sketches;
- rules for preventive repair of tools and devices.
Locksmith of emergency recovery works, 4th category
Description of works.
1. Execution of works on the repair of water supply networks, caulking, filling with lead and various substitutes for sockets of pipes with a diameter of over 300 to 900 mm.
2. Installation and replacement of fittings and fittings on existing networks and highways.
3. Determination of the nature of damage on networks and highways.
4. Shutdown of individual sections of pipelines, emptying and filling them with the installation of air inlet and outlet air.
5. Flushing of pipelines.
6. Adjustment of gate valves on networks and pipelines.
7. Taking readings of pressure on the manometer.
8. Tapping under pressure in pipelines.
9. Production of cleaning the sewer network and collectors at a depth of 12 m using a hydraulic method.
10. Elimination of blockages by flexible shaft, water jet washout and hydraulic back pressure method using mobile auto pumps.
11. Preparation of a cable and a winch with a lifting capacity of up to 1 ton, metal balls and cylinders of a given specific weight.
12. Production of repair of the sewerage network under the guidance of a mechanic of higher qualifications.
13. Production of preventive maintenance of equipment and mechanisms used for cleaning.
14. Welding of plastic pipes.
Must know:
Water supply scheme of the site;
- rules for reading complex drawings and sketches;
- drawing up diagrams, sketches and detailing from nature;
- methods of sealing sockets manually and using pneumatic tools;
- device for tapping under pressure;
- rules and methods for disconnecting metering pipelines and heating them;
- layout of the sewerage network of the area in which the work is carried out;
- technology of cleaning the sewer network and collectors in a hydraulic way and removing blockages with a flexible shaft;
- main equipment and mechanisms used in the repair and cleaning of sewer pipelines and structures;
- rules for earthworks in dry soils.
Locksmith of emergency recovery work, 5th grade
Description of works.
1. Execution of work on the repair of water supply networks, caulking, filling with lead and various substitutes for sockets of pipes with a diameter of over 900 mm.
2. Pressure connection of pipes of all diameters with preparation and scraping of large surfaces of saddles to existing pipelines.
3. Chlorination of highways and networks with bleach, liquid or gaseous chlorine in urban environments; discharge of chlorine water after chlorination.
4. Production of emergency repair or filling of stuffing box expansion joints on pipelines under pressure without turning off the network.
5. Closing and opening of large valves on highways and water conduits by an automatic drive, a pneumatic drive and an electric drive.
6. Installation, regulation and repair of mechanical drives.
7. Cleaning the sewer network, siphons, canals and collectors of round, egg-shaped, hipped-roof and other sections at a depth of over 12 m using a hydraulic method.
8. Preparation of the cable and winches with a lifting capacity of up to 2 tons.
9. Preparation of wooden and metal cylinders of a given specific weight.
10. Removal of blockages in the sewer network and collectors using various rods with ball and ruff anchors.
11. Repair of the existing sewerage network using dewatering equipment and mobile cranes.
12. Bonding and assembly of plastic pipes.
Must know:
The device and the principle of operation of the equipment for tapping under pressure;
- the operating mode of the network of the site;
- rules and methods for chlorination of pipelines in urban environments;
- safe ways of dumping water after chlorination of pipelines;
- the device and the peculiarity of the siphons' work;
- construction of stuffing box expansion joints on pipelines of various diameters;
- methods for flushing pipelines;
- device and principle of operation of mechanical, hydraulic and electrical drives used when opening and closing large valves;
- ways to eliminate faults in the applied drives;
- layout of the entire sewer network, emergency outlets;
- technology of cleaning the sewer network, siphons, collectors and channels by the hydraulic method;
- ways to eliminate blockages;
- methods for establishing the elimination of gas contamination, the rules for earthworks in wet soils, the timing of the repair of mechanisms and equipment.
Locksmith of emergency recovery work, 6th grade
Description of works.
2. Maintenance, adjustment and repair of pipelines, water supply, sewerage networks, valves and valves with a diameter of over 1200 mm.
3. Shutdown and start-up of main pipelines.
4. Performing switching on the main collectors and channels.
5. Determination of the state of networks and pipelines with diagnostic devices.
6. Control of the sewer cleaning machine when removing blockages from the sewer network.
7. Management of work on elimination of accidents, adjustment and start-up of complex equipment.
Must know:
Rules for conducting emergency repair work on large-diameter water supply and sewerage networks;
- layout of the serviced water supply and sewerage network;
- features of welding of pipes operating under pressure;
- classification of defects welded joints, methods of their identification and elimination;
- methods of establishing and eliminating gas contamination.
Work examples.
1. Shandorny and shield gates, gates - assembly and disassembly.
2. Gate valves with a diameter over 1200 mm - closing, opening and repairing.
3. Device for energy explosion - preparation for work.
4. Underground pipelines - repairs without opening the ground.
Locksmith of emergency recovery work, 7th grade
Description of works.
1. Performance of particularly complex emergency recovery work on the existing water supply and sewerage networks.
2. Maintenance, regulation and repair of water supply and sewerage networks: valves, valves, sockets of pipelines with a diameter of over 1200 to 2000 mm.
3. Installation, dismantling, regulation and testing of automatic equipment pumping units, compressor equipment, automatic temperature control systems in heat supply networks and water heaters of all types.
4. Management of pumping stations in emergency modes.
5. Evaluation technical condition heat-consuming installations and heating networks with drawing up a list of defects.
6. Verification of assembly accuracy of remanufactured equipment and carrying out load test.
Must know:
Rules for conducting emergency recovery work on water supply and sewerage networks with large-diameter pipelines;
- design features and hydraulic diagrams of the equipment being repaired;
- methods of repair, assembly, installation of units and parts of the serviced equipment;
- permissible values โโof loads on units and mechanisms;
- rules for accepting equipment from repair and putting it into operation.
I APPROVE:
[Job title]
_______________________________
_______________________________
[Name of company]
_______________________________
_______________________/[FULL NAME.]/
"______" _______________ 20___
JOB DESCRIPTION
Locksmith of emergency recovery work of the 4th category
1. General Provisions
1.1. This job description defines and regulates the powers, functional and job responsibilities, rights and responsibilities of an emergency repair locksmith of the 4th category [Name of the organization in the genitive case] (hereinafter - the Company).
1.2. An emergency repair mechanic of the 4th category is appointed and dismissed in accordance with the procedure established by the current labor legislation by order of the head of the Company.
1.3. An emergency repair mechanic of the 4th category belongs to the category of workers and is subordinate to the [name of the position of the immediate supervisor in the dative case] of the Company.
1.4. A person with secondary education, appropriate training in the specialty and work experience of at least 1 year is appointed to the position of a locksmith of emergency recovery work of the 4th category.
1.5. A locksmith of emergency recovery work of the 4th category should know:
- water supply scheme of the site;
- rules for reading complex drawings and sketches;
- drawing up diagrams, sketches and detailing from nature;
- methods of sealing sockets manually and using pneumatic tools;
- device for tapping under pressure;
- rules and methods for disconnecting metering pipelines, and heating them;
- the layout of the sewerage network of the area in which the work is carried out;
- technology of cleaning the sewer network and collectors in a hydraulic way and removing blockages with a flexible shaft;
- main equipment and mechanisms used in the repair and cleaning of sewer pipelines and structures;
- rules for earthworks in dry soils.
1.6. In his activities, the 4th category emergency recovery locksmith is guided by:
- normative acts and methodological materials on the issues of the work performed;
- internal labor regulations;
- orders and orders of the head of the Company and the immediate supervisor;
- this job description;
- rules on labor protection, safety, industrial sanitation and fire protection.
1.7. During the period of temporary absence of a locksmith of emergency recovery work of the 4th category, his duties are assigned to [the name of the position of the deputy].
2. Job responsibilities
A locksmith of emergency recovery work of the 4th category is obliged to carry out the following labor functions:
2.1. Execution of works on the repair of water supply networks, caulking, filling with lead and various substitutes for sockets of pipes with a diameter of over 300 to 900 millimeters.
2.2. Installation and replacement of fittings and fittings on existing networks and highways.
2.3. Determination of the nature of damage on networks and highways.
2.4. Shutdown of individual sections of pipelines, emptying and filling them with the installation of air intake and exhaust air.
2.5. Flushing of pipelines.
2.6. Adjustment of gate valves on networks and pipelines.
2.7. Taking readings of pressure on the manometer.
2.8. Tapping under pressure in pipelines.
2.9. Hydraulic cleaning of the sewer network and collectors at a depth of 12 meters.
2.10. Elimination of blockages by flexible shaft, water jet washout and hydraulic back pressure method using mobile auto pumps.
2.11. Preparation of a cable and a winch with a lifting capacity of up to 1 ton, metal balls and cylinders of a given specific weight.
2.12. Repair of the sewerage network under the guidance of a more qualified locksmith.
2.13. Production of preventive maintenance of equipment and mechanisms used for cleaning.
2.14. Welding of plastic pipes.
In case of official necessity, a locksmith of emergency recovery work of the 4th category may be involved in the performance of his official duties overtime, by the decision of his immediate supervisor, in the manner prescribed by law.
3. Rights
A locksmith of emergency recovery work of the 4th category has the right
3.1. Give instructions to subordinate employees, assignments on a range of issues included in his functional duties.
3.2. Monitor the execution of production tasks, the timely execution of individual orders by employees subordinate to him.
3.3. Request and receive necessary materials and documents related to the issues of their activities and the activities of subordinate employees.
3.4. Interact with other services of the enterprise on production and other issues within its functional responsibilities.
3.5. To get acquainted with the draft decisions of the management of the enterprise concerning the activities of the Division.
3.6. Submit proposals for improving the work related to the provisions of this Job description responsibilities.
3.7. Submit for consideration by the head of the proposal on the encouragement of distinguished workers, the imposition of penalties on violators of production and labor discipline.
3.8. Report to the manager about all identified violations and shortcomings in connection with the work performed.
4. Responsibility and performance evaluation
A locksmith of emergency recovery work of the 4th category bears administrative, disciplinary and material (and in some cases stipulated by the legislation of the Russian Federation - and criminal) responsibility for:
4.1.1. Failure to comply or improper fulfillment of the official instructions of the immediate supervisor.
4.1.2. Failure to fulfill or improper fulfillment of one's own labor functions and the tasks assigned to him.
4.1.3. Misuse of the granted official powers, as well as their use for personal purposes.
4.1.4. Inaccurate information about the status of the work entrusted to him.
4.1.5. Failure to take measures to suppress identified violations of safety regulations, fire safety and other rules that pose a threat to the activities of the enterprise and its employees.
4.1.6. Failure to enforce labor discipline.
4.2. Assessment of the work of a locksmith of emergency recovery work of the 4th category is carried out:
4.2.1. Immediate supervisor - regularly, in the process of the employee's daily performance of his labor functions.
4.2.2. Attestation Commission enterprises - periodically, but at least once every two years, based on the documented results of work for the evaluation period.
4.3. The main criterion for evaluating the work of a locksmith of emergency recovery work of the 4th category is the quality, completeness and timeliness of his performance of the tasks provided for in this instruction.
5. Working conditions
5.1. The work schedule of the 4th grade emergency recovery locksmith is determined in accordance with the internal labor regulations established by the Company.
5.2. In connection with the production need, an emergency recovery locksmith of the 4th category can go on business trips (including local ones).
Acquainted with the instructions ___________ / ____________ / "____" _______ 20__
It might be useful to read:
- Scenario for adults new year's commotion in the chicken coop;
- We make handmade soap for the new year;
- "Let's draw Santa Claus";
- A funny new year script with a modern twist for high school students;
- New Year's scenarios for a corporate party are cool;
- New Year's family photo session: ideas for clothes and bright images;
- How to make New Year's soap: photo master class;
- Games, contests for a feast;