Polymer clay sweets using an extruder. Plastic pendants "Chocolate candies" Polymer clay pendants master class

Modeling from polymer clay is one of the most popular types of needlework in our time. One is available to everyone, regardless of age, social status and other interests, allows you to develop your creative abilities.

As a rule, something small: small figurines, souvenirs, jewelry, magnets on the refrigerator. They are more popular, because in order to make really beautiful souvenirs or jewelry, you need to gain experience and professionalism in this matter, but to glue magnet on a more or less resulting figure you can always, because you can glue anything on the refrigerator door. There are no rules here, and everything depends only on personal imagination.
But it's better to start with figurines that are simple in terms of making, which, when finished, will look very attractive. Magnet in the form of a chocolate bar is one of such simple but very effective souvenirs that even a beginner can handle.
1. To make "Chocolate" you will need:
Polymer clay"Chocolate color" (the color can be lighter or darker, depending on the type of chocolate that is planned to be dazzled). If there is no suitable color, you can mix several colors of clay to achieve the desired shade.
Knitting needle
Knife

2. You need to knead the clay with your fingers.

3. Using the means at hand (a thick marker, spray - air freshener or any other bottle) roll it into a pancake.

4. Grasp the knitting needle.

5. Make vertical stripes on the pancake by pressing a little knitting needle over it.

6. Make horizontal stripes, thus forming classic squares on the chocolate bar.

7. It turns out this is such an appetizing chocolate pancake.

8. Using a knife, make diagonal stripes inside the cubes so that they become as similar as possible to real ones.

9. You should get something like this.

10. Cut off all unnecessary and leave only 4 whole cubes.

11. It remains to bake a clay chocolate bar in the oven, preheating it to 130 degrees (no higher !!!) for 20 minutes. After the end of this period, you must let it cool for at least an hour. After, you can stick on reverse side magnetic plate.

12. The magnet is ready. You just need to warn all households that it is inedible. If you wish, you can make several of these magnets and give them to friends and acquaintances, work colleagues, etc.

Today I will show you how to make an uncomplicated chocolatier pendant. Such a pendant will add charm to your look or can be a great gift for a fashionista.

We will need:

Baked polymer clay.
Rolling pin or pasta machine.
The cutter is round.
A needle or a sharply sharpened toothpick.
Liquid plastic gel.
Dots.
Silicone mold on request.

Knead in your hands and then roll out a layer of clay with a rolling pin or a pasta machine, which is slightly larger than the cutter. Don't make it very thin. Attach the cutter without cutting, but only outlining its contours.

Make three indentations of different sizes with the dots.

Then, with a needle, begin to loosen all the clay, without going into the grooves and slightly going over the edges. This should be done without going deep, literally on the surface of the clay, in circular motions. I do this with a medical syringe needle, you can sharpen a toothpick sharply.

When you are finished loosening, barely, lightly apply your finger, smooth the strongly protruding particles of clay. True, our surface has become like sprinkled with grated chocolate ...?

To decorate the grooves, take a very small piece of the same clay and start mixing gel into it. Until he begins to stretch in his hands like chewing gum.

Then transfer the clay to a container for further mixing. I have this unnecessary cap. Continuing to add the gel, stir until it reaches a consistency so that the plastic will slowly and viscidly descend from the stick or spatula.

Now we will fill the indentations with our polymer cream (it is so similar to ganache cream in cooking). You do not need to achieve the perfect drop, after 5-10 minutes it will settle by itself, settle down and straighten out.

Now put the cutter on top, gently turn it over, press the clay firmly against the cutter. The clay should not cut through, but only stick tightly!

Now, gently, slowly, begin to stroke the surface of the clay, pressing lightly, slightly. The clay will stretch, and the desired depression will appear. You don't need to make it very voluminous.

Then take another layer of clay. If you do not have a textured silicone mat, then you can roll it onto a piece of linen fabric, to a small piece of textured wallpaper. But I was recently given this "miracle", so I will use it.

First, I pressed the clay layer against the silicone mat with my hands, then rolled it more tightly with a rolling pin.

We remove it carefully. We admire.

Now it is important for us to put this layer on the surface on which you will bake the pendant. It can be ceramic tiles or glass from a frame. I took the iron cap.

Lay the textured layer with the beautiful side down. Don't press, don't roll it.

Place our cutter with the workpiece on top and press firmly on top with your hand. This will automatically glue both parts and cut off the excess.

At this stage, I got distracted and forgot to take a photo of how I took off the cutter. You can leave it on, but then you will need to sand the edges of the pendant. My idea was to process the edges as well as the entire surface, loosening it with a needle, so I took it off.

We put the pendant to bake. Be sure to watch the temperature indicated on your clay. I set it for 25 minutes at 110 degrees.

If in the future you just screw in the pin and attach the bail for the pendant, then no more baking will be needed. Your decoration will be ready. Fast, in one bake and with a minimum of time and tools.

And also I want to show you how great these pendants look in a different color.

Polymer clay pendants are a fairly popular topic today. Many people choose to wear stylish DIY jewelry. Paying attention to young people, you can see that in their jewelry and accessories there are original elements such as sweets, cakes, pastries, etc. And so today we will learn how to make polymer clay pendants in the form of chocolates.

Polymer clay pendants master class:

To make chocolates from polymer clay, we need:

Plastic of flesh-colored, translucent raspberry, white and chocolate color;

Toothpick;

Something with which you can roll out plastic (rolling pin, glass bottle).

How to make a polymer clay pendant:

1. Roll a small ball out of raspberry-colored plastic - this is the filling of our chocolate candy. Roll a thin pancake out of flesh-colored plastic.

2. Now we wrap the filling in a pancake so that the layer of flesh-colored plastic is evenly distributed. If there is excess at the edges, then they need to be cut off. We should get an even ball.

3. We roll a pancake out of chocolate-colored plastic and place our ball with filling in it. In the same way, we roll it all into an even ball.

4. Slightly flatten the resulting chocolate-colored ball and cut off small pieces with a blade so that it looks like a bite.

5. Decorate the candy with white chocolate made of white plastic. To do this, you need to roll out a thin strip of white color and lay it on our chocolate bar.

6. And the final touches. Use a toothpick to poke around the filling to complement it with a crumbly bite-like effect.

7. Now insert the pin for jewelry on any side from which you want and send the candy to the oven. After baking, the resulting polymer clay pendant must be polished and varnished.

Have you ever seen blue chocolate? If not, then I suggest you make it yourself, only with us it will not be edible, but in the form of a beautiful bracelet made of polymer clay. When I saw something like this, I could not help but make such beauty for myself.

Making it should not cause any difficulties, the work is not difficult, so I can recommend it even to everyone who has recently become acquainted with such a wonderful material as polymer clay. The bracelet is very delicate and feminine, I would say airy and light. So exclusive decoration made of plastic handmade will perfectly complement your individual look.

For work we need the following materials:

Roll up small balls (future petals) from polymer clay of turquoise color and flatten them to the working surface. Pry off with a blade and fold into a flower. One flower needs five petals. I made white and turquoise flowers. I added brown plastic to the middle.

We fix it on future sweets.

When the candies are ready, they can be sent to the oven for baking. Strictly observe the baking time and temperature, following the directions on the instructions.

On the one hand, it is not difficult to wind the lollipops, but whoever has tried it knows that it is difficult to make a lot of them, especially if you need paired ones for earrings. Today, to simplify the task, I suggest using an extruder.

Mixing clay of delicious colors:

First, I make barrels of polymer clay, cut each into 3 parts, then I stack the colors in a pile, fill it like this with a multi-colored sausage inside:

I squeeze through a hexagon or a not very small circle. I roll the lollipops into spirals. You can also pre-tighten the flagellum:

We continue the topic. Now add the multi-colored segments. We squeeze through the nozzle in the form of a three-petal flower:

We change the nozzle for the thinnest noodles. Extrude the colored threads and bake them.

Cut with scissors or a knife. We get colored sprinkles:

When gluing to the cream, you need to press them a little into the surface so that they do not sprinkle. On top, I covered the bagels with varnish, it gives additional bonding of the surfaces:

A slightly larger hole nozzle helps us make these sausages. After baking, I cut it and glue it onto the fimo gel. It turns out a cake with polka dots:

And if you wrap a piece of light beige clay in brown and squeeze it through a nozzle in the form of a droplet, you can get a lot of almond sprinkles. We simply plan the baked sausage in as thin layers as possible:

Such beads can become not only jewelry, but also come in handy for a dollhouse or soft toys sewn by your hands!

It might be helpful to read: