Emergency repair worker. Locksmith of emergency repair work, etc. What should a locksmith of the 4th category

This job description has been translated automatically. Please note that automatic translation does not provide 100% accuracy, so there may be minor translation errors in the text.

Instructions for the position " Locksmith of emergency and restoration works of the 4th category", presented on the site, complies with the requirements of the document - "DIRECTORY qualification characteristics occupations of workers. Issue 87 public utilities settlements. (Taking into account the applications approved by: order of the State Committee of Ukraine on Housing and Communal Services of 09.07.2004 N 132, order of the State Housing and Communal Services of Ukraine on 22.11.2004 N 210, order of the Ministry of Housing and Communal Services of 08.12.2009 N 387, order of the Ministry of Housing and Communal Services of Ukraine on December 23, 2010 N 464), which was approved by the order of the State Committee for Construction, Architecture and Housing Policy of Ukraine on June 14, 1999 N 144. Agreed by the Ministry of Labor and social policy Ukraine.
The status of the document is "valid".

Preface to job description

0.1. The document comes into force from the moment of its approval.

0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.3. Document approved: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.4. Periodic check this document produced at intervals not exceeding 3 years.

1. General Provisions

1.1. The position "Mechanic of emergency and restoration works of the 4th category" belongs to the category "Workers".

1.2. Qualifications- complete or basic general secondary education. Vocational education. Training. Work experience by profession as an emergency repair worker of the 3rd category - at least 1 year.

1.3. Knows and applies:
- site water supply scheme;
- rules for reading complex drawings and sketches;
- drawing up in kind schemes, sketches;
- detailing rules;
- methods of clogging sockets manually and using pneumatic tools;
- the structure of the apparatus for cutting under pressure;
- rules and methods for disconnecting frozen pipelines and their heating;
- the layout of the sewerage network of the area in which the work is carried out;
- technology for cleaning the sewer network and collectors in a hydraulic way and removing blockages with a flexible shaft;
- the main equipment and mechanisms used during the repair and cleaning of sewer pipelines and structures;
- rules for earthworks in dry soils;
- the procedure for performing work associated with increased danger.

1.4. An emergency repair fitter of the 4th category is appointed to the position and dismissed by order of the organization (enterprise / institution).

1.5. The locksmith of emergency repair work of the 4th category reports directly to _ _ _ _ _ _ _ _ _ _ .

1.6. The locksmith of emergency and restoration works of the 4th category directs the work of _ _ _ _ _ _ _ _ _ _ .

1.7. The locksmith of emergency repair work of the 4th category during his absence is replaced by a person appointed in the prescribed manner, who acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.

2. Description of work, tasks and job responsibilities

2.1. Performs hydraulic cleaning of the sewer network and collectors at a depth of up to 12 m.

2.2. Eliminates clogging in pipes with a flexible shaft, washing out with a jet of water and the method of reverse hydraulic pressure using mobile auto pumps.

2.3. Performs preparation of a cable and winches with a lifting capacity of up to 1 t, metal balls and cylinders of a given specific gravity.

2.4. Repairs sewer networks under the guidance of a highly qualified locksmith.

2.5. Carries out repairs of equipment and mechanisms used during cleaning.

2.6. Welds plastic pipes.

2.7. Knows, understands and applies the current regulatory documents relating to its activities.

2.8. Knows and complies with the requirements of normative acts on labor protection and environment, complies with the norms, methods and techniques for the safe performance of work.

3. Rights

3.1. The Level 4 Repairman has the right to take action to prevent and correct any violations or inconsistencies.

3.2. An emergency repair worker of the 4th category has the right to receive all social guarantees provided for by law.

3.3. The locksmith of emergency repair work of the 4th category has the right to demand assistance in the performance of his duties. official duties and exercise of rights.

3.4. An emergency repair fitter of the 4th category has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision necessary equipment and inventory.

3.5. The locksmith of emergency repair work of the 4th category has the right to get acquainted with the draft documents relating to his activities.

3.6. The emergency repair fitter of the 4th category has the right to request and receive documents, materials and information necessary for the performance of his duties and orders of the management.

3.7. An emergency repair fitter of the 4th category has the right to improve his professional qualifications.

3.8. The locksmith of emergency repair work of the 4th category has the right to report all violations and inconsistencies identified in the course of his activities and make proposals for their elimination.

3.9. An emergency repair fitter of the 4th category has the right to get acquainted with the documents defining the rights and obligations of the position held, the criteria for assessing the quality of the performance of official duties.

4. Responsibility

4.1. The locksmith of emergency repair work of the 4th category is responsible for non-fulfillment or untimely fulfillment of the duties assigned by this job description and (or) non-use of the rights granted.

4.2. The locksmith of emergency repair work of the 4th category is responsible for non-compliance with the rules of internal labor regulations, labor protection, safety, industrial sanitation and fire protection.

4.3. The locksmith of emergency and restoration works of the 4th category is responsible for the disclosure of information about the organization (enterprise / institution), which is a trade secret.

4.4. The locksmith of emergency and restoration works of the 4th category is responsible for non-fulfillment or improper fulfillment of the requirements of internal normative documents organizations (enterprises/institutions) and legal orders of management.

4.5. The locksmith of emergency repair work of the 4th category is responsible for offenses committed in the course of his activities, within the limits established by the current administrative, criminal and civil legislation.

4.6. The emergency repair worker of the 4th category is responsible for causing material damage organization (enterprise/institution) within the limits established by the current administrative, criminal and civil legislation.

4.7. The emergency repair fitter of the 4th category is responsible for the misuse of the granted official powers, as well as their use for personal purposes.

We bring to your attention a typical example of a job description for an emergency repair worker, a sample of 2019. A person with primary or secondary vocational education, special training and work experience can be appointed to this position. Do not forget, each instruction of an emergency repair worker is issued on hand against receipt.

It provides typical information about the knowledge that a repair fitter should have. About duties, rights and responsibilities.

This material is included in the huge library of our site, which is updated daily.

1. General Provisions

1. An emergency repair fitter belongs to the category of workers.

2. A person with an average professional education or initial vocational education and special training and work experience of _______ years.

3. An emergency repair fitter is hired and dismissed by the director of the organization on the proposal of the head of production (section, workshop)

4. The emergency repair fitter must know:

a) special (professional) knowledge of the position:

- arrangement of drainage mechanisms and pneumatic tools;

- ways to eliminate malfunctions in the operation of mechanisms and pneumatic equipment;

- the frequency and rules for preventive maintenance of tools and fixtures;

b) general knowledge of the employee of the organization:

— rules and norms of labor protection, safety measures, industrial sanitation and fire protection,

- rules for the use of personal protective equipment;

- requirements for the quality of work (services) performed, for rational organization work in the workplace;

- types of marriage and ways to prevent and eliminate it;

- production signaling.

5. In his activities, the emergency repair worker is guided by:

- the legislation of the Russian Federation,

— Charter of the organization,

- orders and directives organization director,

- this job description,

— Rules of internal labor regulations of the organization,

— __________________________________________________.

6. An emergency repair fitter reports directly to a worker with a higher qualification, the head of production (section, shop) and the director of the organization.

7. During the absence of an emergency repair worker (business trip, vacation, illness, etc.), his duties are performed by a person appointed by the director of the organization on the proposal of the head of production (section, workshop) in the prescribed manner, who acquires the appropriate rights, duties and is responsible for the performance of his duties.

2. Responsibilities of an emergency repair fitter

The duties of the locksmith of emergency repair work are:

a) Special (professional) duties:

– Performing work on the repair of water supply networks under the guidance of a more highly qualified locksmith: cleaning and removing blockages of sewer networks, excavating channels and pits and fixing them; caulking and sealing of joints, pouring and caulking with lead, sulfur alloy or cement pipe sockets.

- Performing simple plumbing repair work.

- Toe and lay pipes and fittings.

— Work on manual dewatering mechanisms and pneumatic tools.

b) General duties of an employee of the organization:

— Compliance with the Internal Labor Regulations and other local regulations of the organization,

— internal rules and norms of labor protection, safety measures, industrial sanitation and fire protection.

— Execution within employment contract orders of employees to whom it is repaired in accordance with this instruction.

– Performing work on the acceptance and delivery of shifts, cleaning and washing, disinfection of serviced equipment and communications, cleaning the workplace, fixtures, tools, as well as keeping them in proper condition;

- Maintenance of established technical documentation

3. Rights of an emergency repair worker

The emergency repair worker has the right to:

1. Submit proposals for management consideration:

– to improve the work related to the provisions of this responsibilities,

- on bringing to material and disciplinary responsibility of employees who violated production and labor discipline.

2. Request from structural divisions and employees of the organization the information necessary for him to perform his duties.

3. Get acquainted with the documents that define his rights and obligations in his position, the criteria for assessing the quality of performance of official duties.

4. Get acquainted with the draft decisions of the organization's management regarding its activities.

5. Require the management of the organization to provide assistance, including the provision of organizational and technical conditions and execution of the established documents necessary for the performance of official duties.

6. Other rights established by the current labor legislation.

4. Responsibility of the emergency fitter

The emergency fitter is responsible for the following:

1. For improper performance or non-performance of their official duties provided for by this job description - within the limits established by the labor legislation of the Russian Federation.

2. For offenses committed in the course of their activities - within the limits established by the current administrative, criminal and civil legislation of the Russian Federation.

3. For causing material damage to the organization - within the limits established by the current labor and civil legislation of the Russian Federation.

Job description for an emergency repair worker - a sample of 2019. Job responsibilities of an emergency repair fitter, rights of an emergency repair fitter, responsibility of an emergency repair fitter.

1. The locksmith of emergency and restoration work in the gas sector of the 4th category belongs to the category of workers.

2. A person with a secondary vocational education or primary vocational education and special training and work experience of at least a year is accepted for the position of a locksmith for emergency and restoration work in the gas sector of the 4th category.

3. A locksmith for emergency and restoration work in the gas sector of the 4th category is hired and dismissed by the director of the organization on the proposal of the head of production (section, shop).

4. The locksmith of emergency and restoration work in the gas sector of the 4th category must know:

a) special (professional) knowledge of the position:

Device, rules technical operation and repair of household gas equipment, apartment heating boilers with automation, cooking boilers and group liquefied gas bottled gas installations;

Rules for starting gas into the network, installation and connection to the network gas equipment;

Schemes of location of gas pipelines and communications;

Boiler Supervision Rules for the Construction and Safe Operation of Tanks and Other Pressure Vessels;

Rules for conducting emergency repair work on the routes of existing low and medium pressure gas pipelines with a diameter of up to 500 mm inclusive;

Rules for purging, steaming and testing gas pipelines for tightness;

Arrangement of temporary bypasses on emergency gas pipelines;

Production of repair work on socket joints of cast-iron gas pipelines and methods for installing couplings on gas pipelines;

Technical conditions for the installation and operation of underground gas pipelines;

b) general knowledge of the employee of the organization:

Rules and norms of labor protection, safety measures, industrial sanitation and fire protection,

Rules for the use of personal protective equipment;

Requirements for the quality of work (services) performed, for the rational organization of labor in the workplace;

Types of marriage and ways to prevent and eliminate it;

Production alarm.

5. In his activities, a locksmith of emergency and restoration work in the gas sector of the 4th category is guided by:

RF legislation,

the charter of the organization,

Orders and instructions of the director of the organization,

By this job description,

The internal labor regulations of the organization,

6. The locksmith of emergency and restoration work in the gas sector of the 4th category reports directly to a worker with a higher qualification, the head of production (section, shop) and the director of the organization.

7. During the absence of a locksmith for emergency and restoration work in the gas sector of the 4th category (business trip, vacation, illness, etc.), his duties are performed by a person appointed by the director of the organization on the proposal of the head of production (section, workshop) in the prescribed manner, which acquires corresponding rights, obligations and is responsible for the fulfillment of the duties assigned to him.

II. Job Responsibilities

The duties of a locksmith for emergency and restoration work in the gas sector of the 4th category are:

a) Special (professional) duties:

Performance of emergency repair work on existing gas pipelines of low and medium pressure with a diameter of up to 500 mm inclusive.

Removal of gas condensate from condensate collectors.

Lubrication of taps, testing of gas pipelines for tightness, purging and steaming them.

Digging pits along the route of underground gas pipelines to eliminate the accident.

Performing repair work on the restoration of household gas equipment, cooking boilers, group liquefied gas cylinder installations, as well as gas equipment installed on gas-consuming stoves and other units of industrial, municipal and agricultural enterprises and institutions.

Launching gas into the network and connecting gas equipment to the network.

b) General duties of an employee of the organization:

Compliance with the Internal Labor Regulations and other local regulations of the organization,

Internal rules and norms of labor protection, safety, industrial sanitation and fire protection.

Fulfillment, within the framework of the employment contract, of the orders of the employees to whom it was repaired in accordance with this instruction.

Performing work on the acceptance and delivery of shifts, cleaning and washing, disinfection of serviced equipment and communications, cleaning the workplace, fixtures, tools, as well as keeping them in proper condition;

Maintaining established technical documentation

Locksmith of emergency and restoration works, 2nd category

Job Description.

1. Performing work on the repair of water supply networks under the guidance of a more highly qualified locksmith, cleaning and removing blockages of sewer networks, excavating channels and pits and fixing them; caulking and sealing of joints, pouring and caulking with lead, sulfur alloy or cement pipe sockets.
2. Performing simple locksmith repairs.
3. Toe and lay pipes and fittings.
4. Work on manual drainage mechanisms and pneumatic tools.

Must know:

Installation of drainage mechanisms and pneumatic tools;
- ways to eliminate malfunctions in the operation of mechanisms and pneumatic equipment;
- the frequency and rules of preventive maintenance of tools and fixtures.

Locksmith of emergency and restoration works, 3rd category

Job Description.

1. Performing work on the repair of water supply networks, caulking, pouring lead or sulfur alloy sockets of pipes of small diameters up to 300 mm.
2. Determination of malfunctions of water columns and fire hydrants on the network.
3. Heating of metering pipelines in various ways.
4. Turning on and off the inputs of networks of small diameters according to sketches and diagrams.
5. Manufacture of hydraulic testing of input of networks of small diameters.
6. Cutting pipes of all diameters with rollers, pipelines with a manual drive.
7. Caulking and pouring with lead and various substitutes for pipe mortars under the guidance of a more highly qualified locksmith.
8. Cleaning the sewer network by the hydraulic method, removing blockages in pipes with a flexible shaft to a depth of 7-8 m.
9. Preparation of inflatable balls, disks of the required specific gravity and winches with a lifting capacity of 0.5 tons.
10. Checking the suitability of the cable for work in waste water.
11. Extraction of sediment from the underlying wells.
12. Earthworks with the installation, driving and excavation of metal sheet piles manually or mechanized using water-reducing devices.
13. Installation of plastic pipelines, including socket connections with rubber rings.

Must know:

The device and principle of operation of valves, hydrants, standpipes, pipelines, manual hydraulic presses and pressure gauges;
- rules and methods for sealing sockets with lead and lead substitutes;
- methods for determining the presence of gas in wells;
- method of hydraulic testing;
- ways to eliminate damage to pipelines, fittings, as well as ways to eliminate water leaks;
- methods of chlorination of pipelines with chlorine and bleach;
- reading simple drawings, diagrams and sketches;
- Rules for preventive maintenance of tools and devices.

Locksmith of emergency repair work 4th category

Job Description.

1. Performance of work on the repair of water supply networks, caulking, pouring with lead and various substitutes for pipe sockets with a diameter of more than 300 to 900 mm.
2. Installation and replacement of fittings and fittings on existing networks and highways.
3. Determining the nature of damage on networks and highways.
4. Turning off individual sections of pipelines, emptying and filling them with the installation of air inlets and outlets.
5. Flushing pipelines.
6. Adjustment of the operation of valves on networks and pipelines.
7. Taking readings of pressure on the manometer.
8. Tapping under pressure in pipelines.
9. Production of cleaning the sewer network and collectors at a depth of up to 12 m using a hydraulic method.
10. Removal of blockages by flexible shaft, water jet washout and reverse hydraulic pressure method using mobile auto-pumps.
11. Preparation of a cable and a winch with a lifting capacity of up to 1 ton, metal balls and cylinders of a given specific gravity.
12. Repair of the sewer network under the guidance of a more highly qualified locksmith.
13. Production of preventive maintenance of equipment and mechanisms used in cleaning.
14. Welding of plastic pipes.

Must know:

Site water supply scheme;
- rules for reading complex drawings and sketches;
- drawing up schemes, sketches and details from nature;
- ways of sealing sockets manually and with the use of pneumatic tools;
- device for tapping under pressure;
- rules and methods for disconnecting metering pipelines and their heating;
- layout of the sewerage network of the area in which the work is carried out;
- technology for cleaning the sewer network and collectors in a hydraulic way and removing blockages with a flexible shaft;
- the main equipment and mechanisms used in the repair and cleaning of sewer pipelines and structures;
- rules for earthworks in dry soils.

Locksmith of emergency and restoration works, 5th category

Job Description.

1. Performance of work on the repair of water supply networks, caulking, pouring with lead and various substitutes for pipe sockets with a diameter of more than 900 mm.
2. Connection under pressure of pipes of all diameters with preparation and scraping of large surfaces of saddles to existing pipelines.
3. Chlorination of highways and networks with bleach, liquid or gaseous chlorine in urban areas; discharge of chlorine water after chlorination.
4. Production of emergency repair or filling of stuffing box compensators on pipelines under pressure without turning off the network.
5. Closing and opening of large valves on highways and conduits with an automatic drive, pneumatic drive and electric drive.
6. Installation, regulation and repair of mechanical drives.
7. Cleaning of the sewer network, siphons, channels and collectors of round, ovoid, tent and other sections at a depth of more than 12 m using a hydraulic method.
8. Preparation of cable and winches with a lifting capacity of up to 2 tons.
9. Preparation of wooden and metal cylinders of a given specific gravity.
10. Removing blockages in the sewer network and collectors using various rods with ball and brush anchors.
11. Production of repair of the existing sewer network using dewatering devices and mobile cranes.
12. Bonding and assembly of plastic pipes.

Must know:

The device and principle of operation of equipment for tapping under pressure;
- mode of operation of the site network;
- rules and methods of chlorination of pipelines in urban areas;
- safe ways to discharge water after chlorination of pipelines;
- device and features of the operation of siphons;
- construction of stuffing box compensators on pipelines of various diameters;
- methods of flushing pipelines;
- device and principle of operation of mechanical, hydraulic and electric drives used for opening and closing large gate valves;
- ways to eliminate faults in the applied drives;
- layout of the entire sewer network, emergency outlets;
- technology for cleaning the sewer network, siphons, collectors and channels using the hydraulic method;
- ways to eliminate blockages;
- methods for determining the elimination of gas pollution, the rules for excavation in wet soils, the timing of the repair of mechanisms and equipment.

Locksmith of emergency and restoration works, 6th category

Job Description.


2. Maintenance, adjustment and repair of pipelines, water supply, sewer networks, shut-off valves and valves with a diameter of more than 1200 mm.
3. Shutdown and start-up of main pipelines.
4. Perform switching on the main collectors and channels.
5. Determination of the state of networks and pipelines with diagnostic devices.
6. Management of a sewer cleaning machine when removing blockages in the sewer network.
7. Management of work on the elimination of accidents, adjustment and start-up of complex equipment.

Must know:

Rules for conducting emergency repair work on large-diameter water supply and sewerage networks;
- layout of the serviced water supply and sewerage network;
- features of welding of pipes working under pressure;
- classification of defects welded joints, methods for their determination and elimination;
- methods for establishing and eliminating gas pollution.

Work examples.

1. Stop and shield gates, gate - installation and dismantling.
2. Gate valves with a diameter of over 1200 mm - closing, opening and repair.
3. Device for energy explosion - preparation for work.
4. Underground pipelines - repair without excavation.

Locksmith of emergency and restoration works, 7th category

Job Description.

1. Performance of particularly complex emergency and restoration work on existing water supply and sewerage networks.
2. Maintenance, regulation and repair of water supply and sewerage networks: shut-off valves, gate valves, sockets of pipelines with a diameter of more than 1200 to 2000 mm.
3. Mounting, dismantling, adjustment and testing of automatic equipment pumping units, compressor equipment, automatic temperature control systems in heat supply networks and water heaters of all types.
4. Management of the operation of pumping stations in emergency modes.
5. Evaluation technical condition heat-consuming installations and heat networks with the compilation of a list of defects.
6. Checking the accuracy of the assembly of remanufactured equipment and carrying out a load test.

Must know:

Rules for conducting emergency recovery work on water supply and sewerage networks with large diameter pipelines;
- design features and hydraulic circuits of the repaired equipment;
- methods of repair, assembly, installation of components and parts of serviced equipment;
- admissible values ​​of loadings on knots and mechanisms;
- rules for acceptance of equipment from repair and putting it into operation.

APPROVE:

[Job title]

_______________________________

_______________________________

[Name of company]

_______________________________

_______________________/[FULL NAME.]/

"______" _______________ 20___

JOB DESCRIPTION

Locksmith of emergency and restoration works of the 4th category

1. General Provisions

1.1. This job description defines and regulates the powers, functional and job duties, rights and responsibilities of an emergency repair worker of the 4th category [Name of organization in the genitive case] (hereinafter referred to as the Company).

1.2. An emergency repair fitter of the 4th category is appointed to the position and dismissed in accordance with the procedure established by the current labor legislation by order of the head of the Company.

1.3. The emergency repair fitter of the 4th category belongs to the category of workers and reports to [position title of the immediate supervisor in the dative case] of the Company.

1.4. A person with a secondary education, relevant training in the specialty and work experience of at least 1 year is appointed to the position of a locksmith for emergency repair work of the 4th category.

1.5. The locksmith of emergency repair work of the 4th category must know:

  • site water supply scheme;
  • rules for reading complex drawings and sketches;
  • drawing up schemes, sketches and details from nature;
  • ways of sealing sockets manually and with the use of pneumatic tools;
  • device for tapping under pressure;
  • rules and methods for disconnecting metering pipelines, and their heating;
  • the layout of the sewerage network of the area in which the work is carried out;
  • technology for cleaning the sewer network and collectors hydraulically and removing blockages with a flexible shaft;
  • the main equipment and mechanisms used in the repair and cleaning of sewer pipelines and structures;
  • rules for the production of earthworks in dry soils.

1.6. In his activities, the emergency repair worker of the 4th category is guided by:

  • normative acts and methodological materials on the issues of the work performed;
  • internal labor regulations;
  • orders and orders of the head of the Company and the immediate supervisor;
  • this job description;
  • rules on labor protection, safety precautions, industrial sanitation and fire protection.

1.7. During the period of temporary absence of the locksmith of emergency and restoration works of the 4th category, his duties are assigned to [name of the position of the deputy].

2. Job responsibilities

The locksmith of emergency and restoration works of the 4th category is obliged to carry out the following labor functions:

2.1. Performance of work on the repair of water supply networks, caulking, pouring with lead and various substitutes for pipe sockets with a diameter of more than 300 to 900 millimeters.

2.2. Installation and replacement of fittings and fittings on existing networks and highways.

2.3. Determining the nature of damage on networks and highways.

2.4. Shutdown of individual sections of pipelines, emptying and filling them with the installation of air inlet and outlet air.

2.5. Flushing of pipelines.

2.6. Adjusting the operation of valves on networks and pipelines.

2.7. Taking pressure readings on a manometer.

2.8. Tapping under pressure in pipelines.

2.9. Production of cleaning of the sewer network and collectors at a depth of up to 12 meters in a hydraulic way.

2.10. Removal of blockages by flexible shaft, water jet washout and reverse hydraulic pressure method using mobile auto-pumps.

2.11. Preparation of a rope and a winch with a lifting capacity of up to 1 ton, metal balls and cylinders of a given specific gravity.

2.12. Production of repair of the sewer network under the guidance of a locksmith of a higher qualification.

2.13. Production of preventive repairs of equipment and mechanisms used in cleaning.

2.14. Welding of plastic pipes.

In case of official necessity, an emergency repair fitter of the 4th category may be involved in the performance of his official duties overtime, by decision of the immediate supervisor, in the manner prescribed by law.

3. Rights

The locksmith of emergency and restoration works of the 4th category has the right

3.1. Give assignments to subordinate employees, tasks on a range of issues included in his functional duties.

3.2. Supervise the fulfillment of production tasks, the timely execution of individual orders by subordinate employees.

3.3. Request and receive necessary materials and documents related to the issues of its activities and the activities of employees subordinate to it.

3.4. Interact with other services of the enterprise on production and other issues that are part of its functional responsibilities.

3.5. Get acquainted with the draft decisions of the enterprise's management regarding the activities of the Division.

3.6. To propose for consideration by the head of the proposal to improve the work related to the provisions of this job description responsibilities.

3.7. Submit proposals for the consideration of the head of the proposal on the promotion of distinguished employees, the imposition of penalties on violators of production and labor discipline.

3.8. Report to the manager about all identified violations and shortcomings in connection with the work performed.

4. Responsibility and performance evaluation

The locksmith of emergency and restoration works of the 4th category bears administrative, disciplinary and material (and in some cases provided for by the legislation of the Russian Federation - and criminal) responsibility for:

4.1.1. Non-fulfillment or improper fulfillment of official instructions of the immediate supervisor.

4.1.2. Failure or improper performance of labor functions and the tasks assigned to him.

4.1.3. Unlawful use of the granted official powers, as well as their use for personal purposes.

4.1.4. Inaccurate information about the status of the work entrusted to him.

4.1.5. Failure to take measures to suppress the identified violations of safety regulations, fire and other rules that pose a threat to the activities of the enterprise and its employees.

4.1.6. Failure to enforce labor discipline.

4.2. Evaluation of the work of a locksmith of emergency repair work of the 4th category is carried out:

4.2.1. Direct supervisor - regularly, in the course of the daily implementation by the employee of his labor functions.

4.2.2. Certification Commission enterprises - periodically, but at least once every two years, based on the documented results of work for the evaluation period.

4.3. The main criterion for evaluating the work of an emergency repair worker of the 4th category is the quality, completeness and timeliness of his performance of the tasks provided for in this instruction.

5. Working conditions

5.1. The mode of operation of an emergency repair worker of the 4th category is determined in accordance with the internal labor regulations established by the Company.

5.2. In connection with the production need, an emergency repair worker of the 4th category can travel to business trips(including local values).

Familiarized with the instruction ___________ / ____________ / "____" _______ 20__

 

It might be useful to read: