Horizontal drilling work. Search for vacancies and applicants. Other HDD jobs

Work of the engine driver of the GNS vacancies of the driver of the GNS in Moscow. Vacancy GNB machinist from direct employer in Moscow job advertisements hbb machinist Moscow, vacancies recruiting agencies in Moscow, looking for a job as a GNS driver through recruitment agencies and from direct employers, vacancies as a GNS driver with and without work experience. The site of announcements about part-time work and work Avito Moscow job vacancies of the GNB machinist from direct employers.

Work in Moscow as a driver of the GNB

Site work Avito Moscow work fresh vacancies GNB machinist. On our website you can find high-paying job GNB driver. Look for a job as an engine driver in Moscow, browse vacancies on our job site - an aggregator of vacancies in Moscow.

Avito jobs Moscow

Work of the GNB machinist on the site in Moscow, vacancies of the GNB machinist from direct employers Moscow. Vacancies in Moscow without work experience and highly paid with work experience. Vacancies GNB machinist for women.

17 February 2020 - Job responsibilities: - performing the duties of a HDD operator of the installation - performing pilot drilling, expansion, pulling through cases - working as part of a HDD team Requirements: - ability to work on Vermeer and XCMG installations - knowledge of logistical ...

February 26, 2020 - Since 2012, our company has been engaged in the construction of engineering networks (power supply): cable, overhead lines 0.4-10 kV, equipment for KTP, RTP. According to the contracts already concluded, we need to perform a large number of punctures in the soil under the roads in ...

February 20, 2020 - Responsibilities: - Work in a team of 2-3 people; - Preparation, execution of work on trenchless laying of pipelines using the method of horizontal directional drilling (HDD); - Transportation of the drilling rig and equipment to the object; - Installation / disassembly ...

February 19, 2020 - Responsibilities: Work at the company's construction sites (Moscow, Moscow region, regions) on the XZ 360 E HDD installation Requirements: Knowledge technological processes GNB Conditions: Registration by TC Readiness for business trips Accommodation is provided ...

March 11, 2020 - Required work experience: 3-6 years Full-time, full-time Our company has been building engineering networks (power supply) since 2015: cable, overhead lines 0.4-10 kV, equipment for transformer substations, RTP. According to the contracts already concluded, we need ...

February 26, 2020 - Requirements: secondary vocational / secondary technical education; availability of training as a HDD operator; at least 3 years of experience with horizontal directional drilling rigs, including locating rigs; knowledge of technology ...

February 25, 2020 - Due to the expansion of the business, the company is looking for experts in horizontal directional drilling. Tasks: - Support construction works from the moment of the conclusion of the contract and until the commissioning of the object.

March 8, 2020 - Responsibilities: Preparation, execution of works on trenchless laying of pipelines. Requirements: Experience in Vermeer-Navigator installations as a location operator, installation operator, mixing installation operator. Driving license ...

February 26, 2020 - Required! In connection with the expansion, an employee is needed! On-site training! You can do without experience in the field of HDD, BUT LEARNING TO TRAIN! training at the expense of the employer. A hardy employee is required. Responsibilities: Preparation of process fluid for drilling ...

March 2, 2020 - Responsibilities: Working on horizontal directional drilling rigs Ditch Witch, Vermeer, etc. Requirements: Readiness for business travel Experience in construction Conditions: Formal employment Readiness for business travel Training ...

February 17, 2020 - Job responsibilities: Working as part of the HDD brigade. Acting as a locator operator on the Eclipse during pilot drilling. Associated work during drilling and laying of cases. Requirements: Ability to work at a location ...

February 17, 2020 - Job responsibilities: - delivery of equipment to the object (single van) - control over technical condition vehicle - work as part of a HDD brigade - independent performance of the necessary technical works at emergency situations in mode ...

February 25, 2020 - Required work experience: 1-3 years Full-time, full-time Description: Installation of engineering systems using horizontal directional drilling, gas pipeline, water supply, sewerage of communication lines Requires a horizontal directional drilling rig operator ...

March 12, 2020 - Responsibilities: Working in the project team under the leadership of the project manager for new construction, cap. repair, reconstruction, tech. re-equipment of ASG facilities, including in the field of transport infrastructure; Analysis of initial performance requirements ...

March 15, 2020 - Requirement: knowledge of the Hanlyma518B installation. Welding of PE pipes, laying of pipelines. Driving license D, E is welcomed. Work in Kirov and nearby regions. ...

March 12, 2020 - Lead the HDD team; visit the site before the work, draw up a work plan, determine the location of equipment and work conditions; ensure the safety of underground communications during the work; control the maintenance of ...

In the last article, we talked about the history of the HDD method and mentioned that in the early 80s, when the method was just beginning to develop, there were no location tracking systems, and we had to drill “for luck”.

Today things are different. In the USA and European countries, the volume of the horizontal directional drilling market is more than 95% of the entire communications market. In Russia, the method of horizontal directional drilling is at the stage of development. The HDD technology is approved and recommended by the RF Gosstroy for the construction of underground utilities. As of 2013 in Russian Federation the scope of work performed by the horizontal directional drilling method was:

in housing and communal services and construction - 34%,
electric power industry - 30%,
laying of engineering communications - 23%,
laying pipes for transporting oil and gas - 18%,
other use - 5%.

No horizontal drilling rig is complete without an accurate locating system that allows you to track the drilling process "from" to "to". However, some customers still have concerns about the reliability of the method, since there is no direct eye contact with the drilling equipment in the ground. In this article, we will describe the algorithm for locating systems in horizontal directional drilling to allay concerns.

Locating systems were created at the end of the 80s to control the drilling process; today they are most convenient for operation, and perform the following functions:

tracking the location and movement of the drill head;
monitoring the temperature regime of the drill head;
determination of the required grounding depth of the drill head.

Each locating system consists of three key elements:

The probe is a transmitter built into the drill head. It gives signals that the locator receives. The probe records the position of the drill head in the ground - depth, tilt angle and rotation angle, as well as its temperature and other parameters.
The receiver - the HDD locator, processes the information coming from the probe, converts it into a readable format, and displays it on the display. The locator operator (locator) accompanies the drill head all the way and sees the information on the locator screen. The operator of the drilling machine sees the same information on a repeater screen, thus the information is broadcast to two screens: the operator of the locating unit (locator) and the operator of the drilling rig.
Radio communication is organized between the locator and the HDD operator. It is the operator of the location installation by radio communication that gives commands to the HDD operator. The HDD operator, in turn, executes his commands and corrects the movement of the drilling tool, the angle of inclination and the angle of rotation, if necessary. It also sees any changes in the actual position of the drill head on a follow-up screen.

Thus, the probe installed in the drill head transmits information about its location, and also records the depth, tilt and rotation angle, temperature and other parameters. The signal is received by the ground locator, after which the information is converted into a readable format and transmitted to two displays: the receiver display and the repeater screen.

The locating rig operator accompanies the drill head and sees the information on the locator screen. The drill operator sees the same information on a follow-up screen. Radio communication is organized between the locator and the operator of the HDD installation using walkie-talkies. It is the locator who directs the process, he gives commands to the HDD operator about what actions he should perform (at what angle to turn the drill head, drill with rotation or crush the rods, etc.) He promptly corrects the direction of the drill head according to the instructions. If the head deviates from the design direction, the HDD operator changes the drill trajectory, bypassing underground obstacles, in order to avoid collisions with underground utilities: gas, water and oil pipelines, collectors, telephone lines, etc. The operation of drilling a pilot well ends with an exit drill head in the specified location.

With the advent of Locating Systems, the drilling process has become completely controlled and safe. In this article, we talked about the sequence of operation of the location system. We hope that you can now more clearly imagine all the stages of drilling tracking. Note that tracking the drill head when laying communications is not the only geolocation process in HDD practice: thermal imager installations are used at the previous stages of HDD operation, for example, at the stage of soil study and geodetic works.

Today there are at least a dozen location systems of different companies for HDD, each of them has both advantages and disadvantages. If you want to see an article in which we will compare the receivers, leave a request in the comments on Google+ and she will appear on the blog!

Almost 50 years ago (60s) was first developed new technology, named GNB. And immediately such work became in demand. Horizontal directional drilling instantly became popular in the United States. Americans have stopped:

Open up asphalt;
Disassemble rail tracks;
Change traffic flows in order to lay communications.

In such conditions, the Americans, and then everyone else, began to use the GNB method. On a construction site where the GNB method is used, if ancillary workers are excluded, three specialist operators must work without fail. They must attend:

Mixing plant.

The technology of the method consists of three stages, each of which requires an GNB operator. All data on the well operation is displayed on the monitor of the employee, whose work is performed at the GNB unit. Thanks to this information, the operator is able to follow the drill and precisely control its operation, setting the drilling depth and the correct direction.

As you can see, the GND operator, whose training is carried out in various specialized training centers, is an important link when using the horizontal drilling method.

Taking into account the need (it is constantly increasing) of a modern building complex for professional staff, many companies have begun to open centers where they provide training for personnel who will work in the field of HDD.

Perhaps, best center is located in the city of Kazan. For many years now, specialists from GNS complexes representing different regions of the Russian Federation (there are even representatives foreign countries) gather here to improve their qualifications. And training is carried out by the International Association of Specialists (IAS) GNB.

The GNB driver is obliged to manage the installation, install the drilling tool, carry out minor repairs and maintain the complex. In addition, his duties include maintaining the adjacent construction site, as well as loading (unloading) work (for example, pipes, bentonite).

The GNB master organizes all the necessary HDD work before the object is commissioned. He must:

Supervise the work of the brigade;
Understand project documentation;
Coordinate engineering communications;
Maintain reporting documentation.

A specialist performing the duties of a foreman must know drilling rigs, understand the repair of equipment and its maintenance, be able to work with location equipment. In a word, he must have practical skills in organizing work and its leadership.

The GNB engineer is engaged in the design of closed passages, performs their surveys and provides support for the construction of passages for:

Gas pipeline and water supply;
Sewerage;
Electric cable.

The duties of this specialist include:

Control of work on objects;
Control over the supply of equipment and necessary materials;
creation of ID (executive documentation) and its coordination with operating organizations;
Commissioning of the object.

As you can see, to become a really cool specialist, you need hb training.

The laying of communications by the method of horizontal directional drilling (HDD) is gaining more and more popularity. At the construction site, such work is carried out by a HDD team, and vacancies in this area of \u200b\u200bemployment help to fully reveal their professional potential. Remuneration for labor corresponding to qualifications, the possibility of professional and career growth - factors that attract a large number of candidates for such HDD vacancies, such as operator, locator, machinist, engineer, etc.

The presence of secondary specialized education is necessary, since the work of HDD involves the use of technologies that require knowledge of their competent application.

Requirements for the applicant for the vacancy "HDD installation operator"

There should be 3 operators on the construction site, each of whom is responsible for different stages of drilling:

the plant operator directing the blade movement;
locator that tracks the passage of the drill using a location system;
the operator of the mixing plant, responsible for the bentonite slurry, which prevents overheating of the drill blade and helps to soften the soil.

One of the main roles at the construction site is performed by the HDD operator, the vacancy is accompanied by the following requirements:

Knowledge of horizontal directional drilling technology.
Service skills technical equipment.
Additional requirements may be the ability to weld HDPE pipes and work experience of at least 1 year.

Expensive installations are used to carry out trenchless laying, so their management is impossible without the appropriate qualifications. Some firms organize training and accept newcomers to the industry.

This step can be explained by the fact that technical equipment at the enterprises is different, and the models of the drilling rig may require specific knowledge for proper handling of the equipment. On the territory of Russia, both foreign installations (Vermeer, XCMD, Ditch Witch) and domestic ones ("Svyatovit", "Enerprom" and others) are used.

The operator's responsibilities include maintenance drilling rigs, preparation of equipment and performance of HDD works (drilling the soil, pulling through cases), control of the depth and correct direction of the drill.

Considering that the drilling technology presupposes employment in the crew, employers include in the list of duties loading and unloading the complex, cleaning the construction site and installation work.

In Russia salariesspecified in the vacancy announcements "HDD operator" may differ by several tens of thousands of rubles. The difference in wages is due to the fact that the different purpose of drilling (laying a cable for power grids, water pipes or gas pipelines) involves different amounts of work and the complexity of their implementation.

The size of the rate depends both on the region in which the company is located and on the equipment it uses.

Requirements for the applicant for the vacancy "Locator"

An HDD locator, whose vacancy may also be called "location system operator", must meet the following requirements:

Knowledge of the location system.
Reading project documentation, drawings.
The presence of a driving license of category B.
Welding and installation of HDPE pipes.

His responsibilities include monitoring the entire process of the installation. The higher the salary, the more requirements are put forward to the applicant. He must lay and control the path of the drilling rig, preventing damage to other communications.

The operator has at his disposal a special locating system, which is a probe fixed on the drill head and a special device that provides synchronization. The device is equipped with a display with control buttons. With the help of the probe, information is recorded about where the drilling line is directed, how many rotations of the drill head are made and what is the temperature of the HDD installation.

The data obtained by the locator allows you to drill a well using minimal time and material costs.

New location systems are designed in such a way as to spend a minimum amount of time on personnel training. This explains why firms are opening new training centers and ready to accept newbies.

An error in calculations or inattention when performing a location will lead to losses and call into question the advisability of using trenchless technology. Therefore, the requirements for the "Locator" vacancy remain high.

Other HDD jobs

Drilling requires a number of workers in the crew. Along with the operators of the drilling and mixing rig and the locator, there are vacancies for the HDD operator, foreman, engineer

The driver is responsible for controlling the installation. His responsibilities also include the installation of equipment, repair and maintenance of the tool. The area for which he is responsible includes the area of \u200b\u200bthe construction site, loading and unloading of pipes and bentonite slurry components.

The vacancy of a foreman assumes the skills of organizing all types of drilling work, including the commissioning of an object. He must understand the design of installations and locators, the specifics of project documentation, carry out maintenance and repair of equipment.

The foreman leads the team, maintains reporting documentation and coordinates engineering communications. His job requires skill in organizing the team and experience in managing operations and executing the drilling plan.

An engineer is involved in the design of closed passages. His responsibilities include:

filming and support of drilling operations for sewerage communications, water and gas pipelines, electric cables, etc .;
control of work at the HDD facility;
solving issues of supply of technical equipment and materials;
preparation of as-built documentation for agreement with representatives of organizations operating the facility;
commissioning of ready communications.

To perform all types of work in the field of HDD requires careful preparation. Therefore, without appropriate training, admission to such activities is prohibited.

It might be useful to read: