Business at the production of greenhouses. Production and installation of greenhouses: cost-effective business for the summer season How to make a business plan for the production of greenhouses

The production of polycarbonate greenhouses as a business can have a great return, the profitability indicators of finished structures exceed 100%. The benefit is that they are interested in acquiring them and small business, due to the increase in population's demand for natural products, and business industrial scales.

Customize work in this direction It is easy, having the skills of working with the material, for the beginning of enough two people, and for high-quality start, a business plan is needed.

Double. Most often are rectangular, the bias of the roof is calculated in such a way that snowproof rolls from it under the influence of gravity, did not accumulate and did not deform the design. Double greenhouse structures May be wondered or located separately from a residential building.

Arched. Due to the lack of angles for this type of greenhouse, the economical consumption of the underfloor material is characteristic, good light and resistance to the wind, however, snow covers will have to be deleted independently and for this type of construction requires additional equipment.

Which greenhouse is better?

To choose 1 option

Common score

Double

Common score

Single car

Common score

After selecting the type of greenhouse design frame, you need to determine what it will be manufactured.

Material for the carcass greenhouse	Properties
Wood	It has low thermal conductivity, environmentally friendly, easy to install. Of the minuses - does not tolerate low temperatures, high humidity, prone to deformation in the process of long-term operation.
Profile steel trumpet	Not subject to corrosion, withstands the load of the snow cover, suitable for year-round use. Of the minuses - the big value and heavy weight, the complexity of installation - welding and bolted compounds are necessary.
From galvanized corner	Easy and lightweight design protected from corrosion. Of the minuses is not stable, prone deformation from snow covers.

In addition to the carcass, an important point - from which material will be the foundation of the greenhouse:

Wooden timber - popular, easy to use, has a small cost and mobile, if necessary, you can transfer to another place. It has antiseptic impregnation, but upon contact with the Earth, the service life inevitably decreases.
Brick (or stone) foundation has a long service life of 20 years or more, but requires preparation in laying and is characterized by a high cost.
Ribbon. A complex foundation, characterized by high cost and high demand, as reliable, is durable and provides a flat surface. For its manufacture, you will need to dig a trench (for this you will need cars for the transport of land), set the formwork, make a strapping of reinforcement and pour the base with concrete (a concrete mixer and welding machine will be required).

You can proceed to further actions for the implementation of the business idea of \u200b\u200bthe manufacture of greenhouses.

Greenhouse production

If there is no possibility to start a large-scale case in this industry, then really start with a small one. It is worth studying not only the process of manufacturing structures, but also their design so that it does not have to initial stage Attract an additional workforce, because to install an amateur option, it is enough to purchase equipment, and 2 people knowledgeable in the case, may well cope with the task.

Equipment and parts for the production of polycarbonate greenhouses

The placement location should be large, well ventilated, most often the room outside the city is rented, its rent will not cost more than 10,000 rubles, you can start working. What equipment will need:

Welding machine for assembling frame and reinforcement of reinforcement.
The pipe bending machine is especially relevant in manufacturing with its own hands from the profile of a greenhouse with an arched frame type.
Metal cutting machine.
Concrete mixer
Drill.
Electrolzik, for cutting and melting polycarbonate.
Corometger, caliper.

This is a minimum set, but still important details will be required:

Plastic thermoshabs for the reliability of fastening and protection against corrosion.
Galvanized tape - needed when placing sheets of vents in the installation of arched construction.
Plastic perforated tape to protect the ends.
P-shaped end plugs to protect the lower part of the structure.
The n-profile is detachable or permanent for fastening.

In addition, it is required to purchase such materials as the sheets of polycarbonate and a metal profile, in further development, it is necessary to purchase autopolive systems, heating and lighting items.

Photo: Greenhouse options

Main steps

To install the greenhouse, it is necessary to observe the technology in stages, setting the standard version of the greenhouse as follows:

Foundation arrangement. It is done depending on the wishes of the client. You can do without this step, but then the greenhouse can be deformed and becomes short-lived in operation.
The framework of the frame is also made at the request of the client, most often from aluminum or galvanized pipes, not subject to corrosion, can be recommended to be recommended and the wooden basis.
Construction assembly: installation of the frame and the sheath sheets of polycarbonate.
Installation of additional elements: pedigrees, systems of autopolivation, heating and light sources.

Business plan

First you need to decide on the room, it is usually a workshop with high ceilings about 4 meters, heating (seasonal production and requires the highest possible work in winter), power supply to 220-380 V, and the area should begin with 40 square meters.

Suppose, I received an order to a greenhouse with a length of 6m, 2 m wide, 3m height. First, we build a table of necessary initial costs:

Based on the initial data, we construct a greenhouse cost table:

Materials	Sum
Polycarbonate 6 * 2.1m 4 sheet	7000
Galvanized profile20 * 20 * 2m	10000
Profile connecting 12m.	600
Stone plug 12m	600
Thermosyba 300 pcs.	1800
Loops 8 pcs.	150
Ribbon perforated 26m.	400
Roelf self-tapping screw	350
TOTAL:	20900
Foundation	Sum
Foundation from bar 18 m	1100
Foundation of belt	8000
The foundation is brick	5000

If consider market value The greenhouses of this size are 25,000 rubles, the profit of the greenhouse without the foundation will be 4,100 rubles. Consider the option with the styling of the foundation:

Installation	Amount of work
Tape	11000
Brick	5500
Wooden bar	2000
Build construction	7000

Depending on the complexity of laying the foundation, the profit is growing, the most profitable - the ribbon: 4100 + 11000 + 7000 \u003d 22100 profits from the object.

Monthly costs:

It turns out 61700 + 68000 \u003d 129700 costs in the first month of work with the initial contribution, if 4 employees, including the host, will perform permanent orders, you can maximize up to 15 arched structures: 22100 * 15 \u003d 331500 rub. Monthly income, taking into account the deduction of taxes in any case, the initial costs will be covered in the same month.

Would the business on the production of greenhouses?

Yeah interestingNot

The production of greenhouses need to be launched in winter to have time to accommodate the client base and in the spring to cover their initial costs, go into profits. Good luck!

Reading: 7 min · Viewed:.

In the middle lane of Russia without greenhouses can not do. We enjoy the dacciandians, and professional farmers. Quality and functional appointments, of course, they have different. There are many models of different forms from a wide variety of materials on the market today. Thanks to the permanent demand for these designs, you can open profitable business. To do this will need necessary equipment and production areas for the production of greenhouses.

What equipment to choose for the manufacture of greenhouses?

For the production of greenhouses from polycarbonate, there will be enough spacious room. The technology consists of two stages:

the framework of the frame (for this it uses profile pipes, dimensions of 20x20 or 25x25);
flooring sheets of polycarbonate on the basis.

Such equipment is necessary for work:

From special equipment you can highlight the last position. Pipe bender is also called profilegility or pipe bender profile pipe. This equipment belongs to roller devices, due to the billet supply system for bending. For industrial purposes, trilding machines are most often used. They allow you to curb the blanks on large radii. Standard equipment allows you to do it in the same plane. There are additional devices that make it possible to bend profiled pipes even on the helix.

There is a manual version of such equipment. It is suitable only for very little workshops. In serial production, its use is unprofitable. However, I. small production It has its own reason. It is so easier to produce designs to order - in size and client preferences. For example, you can install a small greenhouse that large enterprises Not issued.

Most of all uses in demand in the market of CML and Ercolina firms. They are characterized by reliability, durability and economy energy consumption. There are models that are equipped with microprocessor control. They definitely repeat the desired billets. The construction time is significantly reduced.

The automatic cold profiling line of La 157 is worthy of domestic equipment. Its capacity is 350 parts per hour, which have three meters long. Tape thickness from 0.5 to 2 mm, and width from 50 to 210 mm. Change the view of the manufactured profile can be changed by replacing the tool snap on the line. It can have a different cross section, be closed or open, profiled.

Domestic manufacturers often collect lines by customer parameters. Given the characteristics of the future product, they complete the equipment with the necessary nodes and aggregates. Profiling is achieved by adding punch or puncturing devices to the line. On cold-made profiles there are hooks and ribs of stiffness. With the help of such a line, it is possible to produce arched and tunnel greenhouses for various purposes.

Technology manufacturing greenhouses

The two main components of any greenhouse are a frame and a case. Previously, the foundation was made of wood, and the whole design was covered with film or glass. Today exist modern materialswhich are capable of making conditions in the greenhouse more acceptable for plants. The same design of them is quite lightweight and mobile. An example of such a material can serve as polycarbonate.

Using the welding machine, the parts are connected. They are adjusted and painted. The installation of polycarbonate itself occurs most often on the plot where the greenhouse is installed. In the workshop, all small details should be provided: fasteners, fittings, slots for the vessels and more.

An important factor in the manufacture of greenhouses is its design. It should be borne in mind that from the distance between arcs and the number of horizontal guides depends on which snow load can withstand ready product. From how accurately all the details in the workshop will be completed, the time and quality of the design of the design on the site depends.

Polycarbonate production

Polycarbonate can be purchased in the finished form from the manufacturer, and you can organize your own production. Then it will be possible to expand its product range and even industrial hydroponic greenhouses do. Polycarbonate production line is complex equipment. It consists of such aggregates:

The cost of such a line begins from 650 thousand rubles. The price depends on the power of the extruder, the speed of broaching blanks and performance of the pulling device. Modern lines Allowed to make plastic of increased strength, which is in demand in the production of greenhouses.

In the middle lane of Russia without greenhouses can not do. We enjoy the dacciandians, and professional farmers. Quality and functional appointments, of course, they have different. There are many models of different forms from a wide variety of materials on the market today. Thanks to the constant demand for these designs, you can open a profitable business. To do this, you need the necessary equipment and production areas for the production of greenhouses..

What equipment to choose for the manufacture of greenhouses?

For the production of greenhouses from polycarbonate, there will be enough spacious room. The technology consists of two stages:

the framework of the frame (for this it uses profile pipes, dimensions of 20x20 or 25x25);
flooring sheets of polycarbonate on the basis.

Such equipment is necessary for work:

There is a manual version of such equipment. It is suitable only for very little workshops. In serial production, its use is unprofitable. However, a small production has its own reason. It is so easier to produce designs to order - in size and client preferences. For example, you can install a small greenhouse, which is not available at large enterprises.

Technology manufacturing greenhouses

The two main components of any greenhouse are a frame and a case. Previously, the foundation was made of wood, and the whole design was covered with film or glass. Today there are modern materials that are capable of making conditions in the greenhouse are more acceptable to plants. The same design of them is quite lightweight and mobile. An example of such a material can serve as polycarbonate.

An important factor in the manufacture of greenhouses is its design. It should be borne in mind that from the distance between the arcs and the number of horizontal guides depends, which snow load can withstand the finished product. From how accurately all the details in the workshop will be completed, the time and quality of the design of the design on the site depends.

Polycarbonate production

Polycarbonate can be purchased in the finished form from the manufacturer, and you can organize your own production. Then it will be possible to expand its product range and even industrial hydroponic greenhouses do. Polycarbonate manufacturing line is complex equipment. It consists of such aggregates:

The cost of such a line begins from 650 thousand rubles. The price depends on the power of the extruder, the speed of broaching blanks and performance of the pulling device. Modern lines make it possible to produce plastic of increased strength, which is in demand in the production of greenhouses.

It is becoming increasingly popular. But in order to succeed in this matter, it is important not only to know the technology of their manufacturing. The choice of equipment for the production of greenhouse has not the last value.

General

Nowadays, people seek to eat ecologically pure Products. Most have their cottages and grow vegetables and fruits themselves. But they can not do without certain equipment. Entrepreneurship in the field of providing such people with all necessary gradually gaining momentum.

Dual greenhouses are particularly popular. They differ from each other with dimensions, equipping and complete. For their manufacture use various materials. By appointing the greenhouses are divided into personal, industrial and farmers.

Plastic designs

Polycarbonate greenhouses are considered to be the most common view that is in great demand. This material is a wonderful alternative film and glass. Pluses in such greenhouses mass:

The quality of the material that provides for a long service (about 30 or more years).
Well spend light.
Protect from ultraviolet radiation.
Good thermal insulation.
Materials for making are inexpensive.

Polycarbonate is a practical material that is distinguished by lightness, plasticity and durability. The designs from it are sustainable.

Equipment for the production of polycarbonate greenhouses

The technology is as follows:

frame is manufactured ( profile trumpet 20 * 20, 25 * 25, etc.);
with the help of the factory tape you need to connect plastic sheets and secure them on the design.

The tools used in the manufacture following:

welding machine;
screwdriver;
kraskopult compressor;

Produce details in the utility room, for example, in the garage. Its square should be enough to establish a machine for the production of greenhouses (cutting and processing plastic, for example). And the installation is carried out already in place where the client will say. This usually happens on the garden plot. On the greenhouse, the foundation is made in advance and then install it. Although you can do without it. Finishing windows and doors.

Is it profitable?

The cost of the greenhouse is 10 thousand rubles, provided that it is manufactured independently. For all work spend about 4 hours. For labor day, with a deduction of expenses, you can get about 30 thousand rubles at the initial stage. All stages of the process for installing the greenhouse take 2 days.

The cost of installation is not more than 25 thousand rubles. You can install a greenhouse without a foundation. In this case, the buyer saves a significant amount. In addition, the installation time is spent less. Expenditures will be still on heating (aluminum convectors, which are installed throughout the perimeter of the greenhouse).

The profitability of this project is 100-150%. But there is one important circumstance: the proposals exceed the demand. As mentioned above, the greenhouses from polycarbonate are popular. Therefore, competition in the market is plenty.

Other types of designs

And yet do not despair, because there are still a lot of options in this direction. Let some of them are more costly, but they are more expensive. The demand for them is also great. There are the following types of greenhouses:

the frame is made of wood, the frames are glazed;
metal frame using wooden frames;
metal design covered with glass (easily passes ultraviolet rays);
frame from polyethylene tubes, film coating.

Choice of equipment for the production of greenhouses

You can purchase the necessary techniques in order to independently make parts of the modular design (tube, support, fences, etc.). The choice of equipment for the production of greenhouses depends on your money. Its cost begins from 200 thousand rubles. Designs from wood are usually collected manually and are expensive. If you do not have the required amount of money, the components of the details can be purchased from other entrepreneurs. Modular structures on average can be bought for 20-25 thousand rubles.

To begin with this kind of activity, you will need a sum of 60 thousand rubles - and this is excluding its own technology. If you quickly have a customer base yourself, then in a couple of months, these investments will be able to pay off. Behind the absence of developments in this area, you are better to give ads in advance, bypass farmers and gardeners and talk to them.

It is possible that they will agree to cooperate with you. The manufacture of greenhouses in demand is mainly in the spring-autumn period. The best months for the opening of the business is February and March. Earn money you can continue to invest in your business. For example, in the choice of equipment for the production of greenhouses of greater power. In winter, you can do winter gardens and greenhouses. But this case is more costly and difficult than the production and installation of ordinary greenhouses. The help of specialists in this matter will not be superfluous.

Perhaps it will be useful to read: