Word wrap in turn point. Hyphenation

In section Software to the question How to hyphenate in Microsoft Power point 2007? given by the author Eurovision the best answer is Automatic - no way. As conceived by the developers, this is not required, because the presentation is a visual line to the report, and there should not be a lot of text (and therefore, there is nothing to hyphenate). So either arrange it manually, or take care of shortening the text, because anyway such a presentation will have no effect due to the imperceptibility of information.

22 answers

Hello! Here is a selection of topics to answer your question: How to hyphenate in Microsoft Power Point 2007?

Appendix 5. Tasks performed by students in MicrosoftOfficePowerPoint with links to the teacher's educational space.

Exercise 1 ... "Transfer rules". Editing the presentationPowerPoint.

/mod/forum/view.php?id\u003d2699538

Guys, edit the presentation, adding the hyphenation rules with the necessary words.

Slide 1. Slide 2.

Slide 3. Slide 4.

Assignment 2 ... "Solve the problem of comparing quantities." Learn to work with a pie chart inPowerPoint.

/course/view.php?id\u003d8787&topic\u003d25

/mod/forum/view.php?id\u003d2700445

Students download a slide - a blank, on which the text of the problem, a template for solving it and a place for the future diagram. Then, under the guidance of the teacher, using the Insert - Chart menu item, they learn to create a pie chart with the specified parameters, varying the appearance of the chart.

Assignment 3 ... "Chicken and Duckling". Learning to edit a presentationPowerPoint.

/course/view.php?id\u003d8787&topic\u003d25

/mod/forum/view.php?id\u003d2699208

Guys! Edit your presentation:
-complete it with a portrait of the writer (from the Internet),
-complete it with portraits of heroes,
-remove unnecessary characteristics of heroes,
- maybe you can add your own characteristics?
-decide on the background color and font.
Attach edited presentations to the forum.

Slide 1. Slide 2.

Assignment 4 ... "Make a sound model of the word." Learning to model in a presentationPowerPoint.

/mod/forum/view.php?id\u003d2727039

Words are given to students to choose from or distributed among them from the lesson materials.

Assignment 5 ... “The Book of Agnia Barto”. Learn to create a presentationPowerPoint.

/course/view.php?id\u003d8787&topic\u003d26

/mod/forum/view.php?id\u003d2727132

Slide 1. Slide 2.

The work begins with a discussion of the question of what should be in the book, only then the template is downloaded. As a result of the work of the slides, a collective presentation of the works of A. Barto is obtained.

Assignment 6 ... "Types of transport". Distribute. Learning to classify inPowerPoint.

/mod/forum/view.php?id\u003d2757375

Slide 1. Slide 2.

Slide 3. Slide 4.

The modes of transport (slides 2 - 5) can be named in advance, but it is better when they appear as a result of collective discussion, and only after that the students download the template.

Assignment 7 ... "Tomka and the Cow". Restore the presentation to the work.

/course/view.php?id\u003d8787&topic\u003d27

/mod/forum/view.php?id\u003d2757366

Slide 1. Slide 2.

Slide 3. Slide 4.

Slide 5. Slide 6.

The order of the slides is out of order. Students are invited to restore it in accordance with the text.

Assignment 8 ... "How much more?". Learning to model.

/course/view.php?id\u003d8787&topic\u003d27

/mod/forum/view.php?id\u003d2752361

Students are offered a blank, where pictures are mixed, and it is proposed to draw up a model that will help solve the problem with the given explanations.

Assignment 9 ... “We are solving new problems”. Learning to model.

/course/view.php?id\u003d8787&topic\u003d27

/mod/forum/view.php?id\u003d2760191

Students are invited to edit the prepared presentation slide by drawing up a model of the problem and solving it. The task can be offered both at the stage of studying new material and at the stage of consolidation.

Assignment 10 ... Cyril and Methodius project. Learning to create a presentation.

/mod/forum/view.php?id\u003d2781765

Students are encouraged to decide what material can be presented in this presentation and create a presentation using the materials on the Internet.

Assignment 11 ... Project "Amphibians". Learning to create a presentation.

/course/view.php?id\u003d8787&topic\u003d28

/mod/forum/view.php?id\u003d2769346

Students are asked to create presentations "Amphibians". It is up to them to decide what they will present at it.

Sergey Kozyrev

How do I hyphenate in Microsoft Power Point 2007?

9months ago

0 comments

Answers (1)

Automatically - no way. As conceived by the developers, this is not required, because the presentation is a visual line to the report, and there should not be a lot of text (and therefore, there is nothing to hyphenate). So either arrange it manually, or take care of shortening the text, because anyway such a presentation will have no effect due to the imperceptibility of information.

answered 9 months ago

0 comments

MS Word

Move text quickly up and down

This is the most quick way move text without using the mouse. The text is moved by the up and down arrows while holding down the Shift and Alt keys. There is no need to select the text before moving it - it will happen automatically, and each press of the up or down arrow will move the text one paragraph up or one paragraph down. This method effective not only when moving paragraphs, but also when moving rows in a table.

Remove links in a document

If there are links in the document you have created and you need to make them inactive, then you can select each link, select the command Insert \u003d\u003e Hyperlinkand click on the button Remove link... It is very long and laborious process... There is a faster way to solve the problem: select the entire document with the Edit \u003d\u003e Select All command and click on the keyboard shortcut Ctrl + Shift + F9 - links will be removed, and all other document formatting options will be preserved.

About text, text boxes, and autoshapes

When you need to write a lettering, many people first create a lettering block and then type the text in it. You can achieve the same result by selecting the text that has already been typed and then clicking on the toolbar Drawing label creation button - the text will move inside the label.

You can also insert text into autoshapes (except for lines, polylines, etc.) - as a rule, this is done in several stages: create an autoshape, select it, click on the button for creating an inscription and enter the text. There is also an alternative option: draw the desired autoshape, right-click on it, select Add text and enter your text.

Perhaps, while working, you will change your mind and decide that the text needs to be taken out of the label or from the autoshape. To do this, it is not at all necessary to cut it into the clipboard and then paste it. You can select a text box (or an autoshape) and right-click on it while holding down the Ctrl key - the text will appear in the nearest text field.

Autoshape lighting

By default in the panel Drawing missing button Lighting; there is no corresponding command in the context menu, which is called when the right mouse button is pressed on the autoshape.

However, it is possible to change the lighting of the AutoShape. To do this, add to the panel Drawing button Lightingby calling the command Service \u003d\u003e Settings \u003d\u003e Commandsby choosing from the list Categories paragraph Drawing and by dragging the corresponding button from the window Commands(fig. 1). It is not difficult to use the button - select the autoshape, click on the button Lighting and adjust the lighting as needed (fig. 2).

Figure: 1. Adding the Lighting button to the Drawing toolbar

Figure: 2. Setting up the lighting of the autoshape

Hyphenation

To avoid overly sparse lines in the document, it is recommended to turn on automatic hyphenation. For this in the menu Service select team Language \u003d\u003e Hyphenation and check the box next to the corresponding option (Fig. 3). Just keep in mind that Word always tends to hyphenate words in place of the hyphen. In some cases, it is desirable to avoid such a gap (for example, 10 percent, 1st number, 234-345, etc.). To do this, instead of the usual hyphen, use the non-breaking hyphen by pressing the key combination Ctrl + Shift + Hyphen.

Figure: 3. Setting automatic hyphenation

At the same time, it is quite possible that hyphenation is not required in part of the document, in particular in the headings. To disable hyphenation in a number of paragraphs, select them, use the command Format \u003d\u003e Paragraph \u003d\u003e Position on Page and check the box next to the corresponding option (Fig. 4).

It should be admitted that some words Word cannot transfer correctly. In these words, in the position where you can carry out the transfer, you should insert a soft transfer character by pressing the keys Ctrl + Hyphen... This transfer will take precedence over transfers inserted automatically.

Indexed text

If your document contains variables with indices typed directly in the text and in formulas created using the MS Equation formula editor, then by default they will look different (different sizes of variables and indices and different levels of their arrangement on a line), which significantly spoils appearance of the document (fig. 5).

Figure: 5. Text with an index (the first option is typed in Word, the second in MS Equation)

You can achieve almost complete identity of the appearance of variables with indexes by changing a number of characteristics of manually typed variables. To do this, type all text in Times New Roman, size 12, and the variables additionally in italics. Also, move variables down 1.5 pixels and the indices down 3 pixels with Format \u003d\u003e Font \u003d\u003e Spacingby choosing in the field Bias option Downand indicating the size of the offset (Fig. 6).

Figure: 6. Setting the offset

Also, check that the size is selected in the formula editor Usual (team Size \u003d\u003e Regular) and make it fit 12 pixels (command Size \u003d\u003e Determine- fig. 7).

Figure: 7. Correcting the sizes of the regular font

Breaks in tables

When working with multi-page tables, it sometimes happens that the table breaks not at the end of the sheet, but much earlier, leaving only two-thirds or even a third of the page filled (this depends on the width of the particular table row on which the break occurs). Subsequent lines of the table are transferred to the next page, although they could well fit on the previous one (Fig. 8). This often happens when filling table cells by ordinary copying, when, along with the data, their formats are also copied.

Figure: 8. An example of a table in which the line break does not reach the end of the sheet

The reason for this phenomenon is that the paragraph settings were violated in the text in the table cells. To change the situation, select the table, open the menu Format command Paragraph \u003d\u003e Position on Page and remove the checkboxes Don't break a paragraph, Don't tear yourself away from the next and From a new page (fig. 9) - the table will return to its usual form.

Figure: 9. Changing paragraph parameters

Date in document

Most documents should contain the date of their creation; it is not uncommon to create or update documents of the same type on a daily basis. Therefore, it is very convenient to use automatic date insertion: you press the key combination Alt + Shift + D, and the current date, updated each time the document is opened, is inserted at the cursor position. But this method is not always suitable, since the date is inserted in the traditional format dd.mm.gggg... If this format does not suit you, then use the command Insert \u003d\u003e Field, in the list of fields, select the field Dateand specify the required date format (fig. 10).

Figure: 10. Selecting the date format

If none of the date formats suits you, for example, you need the date in the first line in the document and the day of the week in the second (as in Fig. 11), then you will have to find a more or less similar date format and edit it. In this example, there are no difficulties with the date printed in the top row of the table, since such a format is in the list of formats, and the problem is to insert the day of the week - this is the format of the field Date does not exist. To edit the format, open the menu Insertcommand Field, in the list of fields, specify the field Date and select the original date format in which the desired day of the week appears (Fig. 12). Click on the button Field codesand edit the date format in the field Field codesby removing the unnecessary part of the format (fig. 13). Complete the operation by clicking on the button Ok, - after that, every time the document is opened, the current day of the week will be printed.

Figure: 11. Document with changed date field

Figure: 12. Selecting the original date format for editing

Figure: 13. Date format after editing

Document search

The necessary documents can be searched not only in the usual way, that is, using the command Start \u003d\u003e Find \u003d\u003e Files and Folders, but also directly in Word when opening documents, and when searching in Word, you can rely on the specific properties of documents (document name, author, subject, keywords, file size, date of last update, etc.) or on words found in text.

To search for documents by a word in the text, select the command File \u003d\u003e Open and click on the button Service \u003d\u003e Find \u003d\u003e Normal... Enter a search word, define the search area (Fig. 14), the types of files you are interested in (Fig. 15) and click on the button To find (fig. 16).

Figure: 14. Determining the area for search

Figure: 15. Determining the file type

Figure: 16. Result of a search for documents with the word "Internet" in the text or in the title

To search for documents by their properties, select the command File \u003d\u003e Openand click on the button Service \u003d\u003e Find \u003d\u003e Advanced... Suppose that not only your personal documents are on the computer, but also files of other authors with whom you are working on a common project. In this case, in the field Property specify option Author, in field Condition - option Contains (this is more reliable, since in one case the author can enter only the last name, in the other first and last name, etc.), in the field Value enter the author's last name and click on the button To find(fig. 17).

Figure: 17. Search for all documents of a specific author

However, it should be borne in mind that searching for documents by their specific properties makes sense only if these properties are indicated by all the authors of the documents - the option of filling them in by default, alas, will not provide the desired result. You can specify properties separately for each document using the command File \u003d\u003e Properties \u003d\u003e Document (fig. 18). However, it is unlikely that none of the authors will forget to do this in any document, so it is better to enable the mandatory filling of the key properties of the document when it is first saved. To do this, use the command Service \u003d\u003e Options \u003d\u003e Save and check the box Suggest filling in document properties (fig. 19).

Figure: 18. Filling in document properties

Figure: 19. Setting the mandatory preservation of key document properties

You can search for documents by the date of their creation, and specify not only specific dates, but also their intervals or a list, which is carried out when using tokens AND or OR... In order to find all documents, for example for 2003, in the field Property specify option date of creation, in field Condition- option Not earlier, in field Value enter date January 1, 2003and click on the button Add to... Then again specify in the field Property option date of creation, in field Condition - option Not later, in field Value enter date January 1, 2004, click on the button Add toand then by button To find - all documents for 2003 will be found (Fig. 20).

Figure: 20. Setting up the search for documents created during a certain period

MS Excel

Assigning a color to sheet tabs

Sheet labels can be multi-colored, which is convenient in books with a large number of sheets - then the color, along with the title, will be responsible for the type of information on the sheets. To assign a specific color to individual sheets, select them, right-click, choose Label color and define the color you want.

Fast insertion of columns and rows

To add a row or column to a table, it is not necessary at all, by selecting the column or row before which you need to insert, access the context menu and select the command Add cells... You can press the key combination Ctrl + Shift simultaneously with the "+" sign on the numeric keypad - the result will be the same.

Column mutants

By default, columns in Excel are designated by letters of the Latin alphabet, and rows by numbers. If, after opening the table again, you find that the columns are numbered in the same way as the rows (Fig. 21), do not be alarmed - this is not a virus action. Use the command Service \u003d\u003e Options \u003d\u003e Generaland uncheck the box R1C1 link style (fig. 22) - everything will fall into place.

Figure: 21. Table with numbered columns

Figure: 22. Return to standard column designations

Speeding up printing

If you need a large number of tables, and you are limited in time, then when printing on a black-and-white printer, you can speed up the process by abandoning color (printing in black and white). On black and white printers, colors are displayed as shades of gray, and it takes a while to match a shade to a specific color. When printing in black and white, colored text and borders are displayed in black instead of grayscale, which saves time. To set black and white printing, open the menu Filecommand Page Options \u003d\u003e Sheet and in the group Printing check the box Black and white (fig. 23).

Figure: 23. Setting printing in black and white mode

It is also possible to print without grid lines - in this case large sheets print faster. To do this, use the command File \u003d\u003e Page Setup \u003d\u003e Sheet and uncheck Grid (fig. 24).

Figure: 24. Refusal to print a grid

Entering fractional numbers

By default, in Excel, fractional numbers are entered in accordance with the way it is set in the Windows settings: Control Panel \u003d\u003e Language and Standards \u003d\u003e Numbers... In other words, if a comma is intended for entering fractional numbers in Windows, then in Excel they will be entered separated by commas. However, in practice it may turn out to be different. For example, on computers that have a large number of users, especially in educational institutions, where program settings change in the most unpredictable way. If, when entering a comma-separated fractional number, you see a dot-separated number on the screen and have already checked that Windows settings assume comma-separated input, use the command ServiceParametersInternational and highlight the checkbox Use system separators (fig. 25).

Figure: 25. Return to system separators

Representation

When finalizing the appearance of a table and preparing it for printing, it is often necessary to repeatedly change the features of formatting and printing. Usually, in such cases, sheets are copied and the peculiarities of their display on the screen and when printing are changed. However, it is more convenient to create different sheet views that allow you to view the data in different modes and do not require creating separate sheets.

Before creating a view, the book must be completely configured: it must be given the required appearance and all the necessary printing parameters must be set for it. When printing options are entered into the view, it will automatically include specific print areas of each sheet or the entire sheet if no print area is defined for it.

To create a menu view View select team Representation, press the button Add to and in the field Name enter the name of the view (fig. 26). In this case, it is better to include in the name of the view the name of the active sheet in order to make it easier to find the desired view later.

Figure: 26. Create a view

To return to one of the previously created views, if, for example, you need to print a sheet, use the command View \u003d\u003e Viewsand in the field Viewsselect a view for printing (fig. 27), then press the button Apply and click on the button Printing- the sheet will be printed in black and white.

Figure: 27. Selecting the desired view

Subtotals

Quite often, you have to deal with large lists containing multiple cell values \u200b\u200bfor which you need to know the subtotals. Excel can automatically calculate both subtotals and grand totals in any list. Usually, for this, they first sort by the command Data \u003d\u003e Sort (to group the rows by which you need to summarize), then calculate the grand totals, and then insert the rows for the subtotals and calculate them (Fig. 28).

Figure: 28. Calculation of subtotals

With a significant table size and a large number of areas for which subtotals must be calculated, this process will take a long time. To speed up the work, you can first select a unique list, for each of the values \u200b\u200bof which you need to determine the subtotal, and only then calculate the totals themselves. To create a unique list, select the required column or row and use the command Data \u003d\u003e Filter \u003d\u003e Advanced Filter... Set the group switch Treatmentto position, specify the range of cells where you want to place the result, and enable the option Unique records only (fig. 29, 30). As a result of such filtering, all unique objects of the initial list will appear in the specified area of \u200b\u200bthe table.

Figure: 29. Advanced filter command window

Figure: 30. Result of creating a unique list

Then use the function SUMIF (range, criterion, sum_range)that sums the cells that meet a specific criterion. A range is the range of cells that are checked against a criterion; criterion - a criterion in the form of a number, expression or text that determines the cells to be added; summation range - summed cells (Fig. 31).

Figure: 31. Calculation of subtotals for each of the values \u200b\u200bof the unique list

Removing duplicate lines

Imagine that you have a table-telephone directory (dictionary, etc.), consisting of two columns and a huge number of rows. In the first column, for example, the names of the clients are entered, and in the second - their telephones, while the lines can be repeated (Fig. 32). The challenge is to remove all duplicate lines. The first option that comes to mind is to sort the table by the first column with the command Data \u003d\u003e Sort and manually remove duplicate lines.

Figure: 32. Source table

If the table is very large, you can achieve the same result in a faster, albeit more complex, way. First, select a unique list of phones using the command Data \u003d\u003e Filter \u003d\u003e Advanced Filterby setting the group switch Treatment into position Copy the result to another locationby specifying the range of cells where the result should be placed and enabling the option Unique records only (fig. 33).

Figure: 33. Result of creating a unique list of phones

Now you need to use the function VLOOKUP (lookup_value; table; column_num; value True or False), where the search value is the value to be found in the first column of the table; table - a table with information in which data is searched; column number - the number of the column in the table with information in which the corresponding value should be found. Considering that the function works in such a way that the search for the desired value is possible only in the first column, you will need to swap the columns "FULL NAME" and "Telephone", and then in column D enter the formula with the VLOOKUP function (Fig. 34). Using this formula, the program will take the next value from column C, look for it in column A, and then return the value from column B located in the found row. After that, it remains to make a copy of column D using special paste so that the cells are not formulas, but values \u200b\u200b(command Paste \u003d\u003e Paste Special \u003d\u003e Values - fig. 35), and delete columns A, B, and D that are no longer needed.

Figure: 34. The result of calculations through the VLOOKUP function

Figure: 35. Appearance tables after applying Paste Special

MS PowerPoint

Slides from files

When preparing a presentation, you can use pre-created Word documents and slides from other presentations.

In the first case, when it comes to creating new presentation, open a Word document and apply the command File \u003d\u003e Send \u003d\u003e Microsoft PowerPoint - as a result, a new presentation will be created with text from the file. If you need to insert text from a Word document into an existing presentation, open the presentation in PowerPoint and click on the tab Structure (fig. 36). Specify the slide icon behind which a new slide with text should appear. On the menu Insert select team Slides from structure and indicate required document... Keep in mind that the text that is inserted into the presentation is generated based on the style of the headings of the document, and you can only use texts from files in * .doc, * .rtf or * .txt formats.

Figure: 36. Structure tab

If you want to insert a slide from another presentation into an open presentation, then from the Insert menu, select the command Slides from files, specify the presentation and the inserted slide (fig. 37) and click on the button Paste... If you have inserted all slides, click the button Paste all.

Figure: 37. Selecting the slide to insert

Complex numbering

Page numbering in slides is done by inserting the page number in the footer with the command View \u003d\u003e Headers and Footerswhich opens the Header and Footer window, where you need to enable the checkbox footer (fig. 38) and click on the button Apply to all... Keep in mind that hidden slides continue to count towards numbering. To avoid this, you can put all hidden slides at the end of the presentation - and then all shown slides will be numbered in order.

Figure: 38. Inserting a footer

Naturally, slide pages are numbered in order. If you need to start pagination again in different places of the same presentation (this may be required if your presentation is still under development and represents several separate series of slides), then, alas, you cannot do this within one presentation ... To solve the problem, you will need to create different presentations for each series of slides and link them to each other with hyperlinks.

Presentation template

If presentations are held frequently, it is advisable to spend time carefully preparing a non-standard presentation template - today this is no less relevant than, for example, letterhead for business letters. The logo of the organization, etc. are saved in the template. elements that will automatically play on all created slides in the presentation. In addition, the template determines the format, size and relative position of objects, used fonts, background and other design parameters for presentation elements.

Template development begins with creating a new presentation using the team File \u003d\u003e New... Then select a design template for your slide from the list of default templates. Before changing the design template in accordance with the intended plan, in the menu Viewselect team Master \u003d\u003e Slide Master... On the master slide, make the changes you want to reflect on each new slide. the presentation being created... First of all, change the design and set up the fonts (Fig. 39), in the next step, insert the logo (Fig. 40), and after all the changes are completed on the toolbar Sampleclick on the button Close wizard view.

Figure: 39. Result of customizing the main elements of the presentation template

Figure: 40. The appearance of the slide after inserting the logo

Save your presentation as a template with the command File \u003d\u003e Save As, specify the option as the file type Presentation template and enter the name of the template (fig. 41).

Figure: 41. Saving presentation template

To use the template when creating your presentation, click the button Slide builder, click the link Overview in the lower right corner of the slide and point to the created presentation template.

The template you create can be added to the list of templates in the Auto Content Wizard. For this in the menu File select team Create a... In area Create a click on the link From Auto Content Wizard, press the button Further... Then select the category in which to place the template, click the button Add to and specify the added presentation template (fig. 42).

Figure: 42. Result of adding a template to the list of the auto content wizard

Several design options in one presentation

There are several templates you can use to design individual slides in your presentation. To do this, select specific slides, right-click on the required template and select the option Apply to selected slides... If this command is not available, use the command Service \u003d\u003e Options \u003d\u003e Edit and in the area Disabling new features uncheck the box Several samples (fig. 43).

If you use the templates you have created to design your presentation slides, and not the default templates, then a new template for a specific slide will be installed automatically when you click the Browse link and select a previously created presentation template, unless, of course, you have set a ban on the use of different design options

Figure: 43. Setting permission to use multiple templates in the presentation

MS Outlook

Spellchecking

By default, Outlook does not check documents for spelling errors. To enable automatic spell checking of messages before sending them, use the command Service \u003d\u003e Options \u003d\u003e Spellingand enable the option Always spell check before submitting (Fig. 44) - as a result, when an error is detected, Outlook will inform you and offer options for replacing the misspelled word.

Figure: 44. Setting up automatic spell checker

Using a data file to export contacts

All created messages, appointments, tasks and diary entries are saved in a data file on the local computer. This data file is called a Personal Folders file and has the PST extension. When reinstalling the system, this file can be easily saved in a separate folder on your hard disk or on a CD, and then reconnected.

In addition, a .pst file allows you to access or share information such as contacts from another computer. All you need to do is export the data to a PST file using the Import and Export Wizard. Open in the menu File command Import and export, select the option as an action Export to file, and in the next window, indicate that you want to create a PST file (Fig. 45). Next select a folder Contacts and define the features of saving the file (Fig. 46). Click on the button Done, and then your contacts will be saved in the folder you specified on the disk, which will be easy to connect on another computer using the same Import and Export Wizard. Connecting a PST file with contacts is no different from connecting a regular PST file. In order not to forget the location of the file, it is best to add it to the Outlook data files list right away. To do this, use the command File \u003d\u003e Processing Data File, click the button Add to and point to the generated PST file. As a result, in the list of data files, in addition to personal folders, the file you have created with contacts will also appear (Fig. 47).

Figure: 45. Determining the type of created file

Figure: 46. \u200b\u200bDetermining the conditions for the saved file

Figure: 47. Outlook data files

Working time planning

The final result depends on how well the work is planned. To some extent, Outlook helps to organize the list of tasks, but it only reminds that it is time to start performing this or that task, that it is already overdue; in addition, Outlook can reassign a task to another employee and allow you to control its execution. And this, by and large, exhaust Outlook capabilities in terms of task processing.

However, it is very important not only to outline a number of tasks, but also to plan them so that everything can be done on time and that planning is automated as much as possible. You need to know when you will complete a specific task, whether it is possible in principle to complete it by the deadline and when it is better to start the task in order to complete it.

It's a good idea to be able to assess in advance how realistic your plan is (subject to the specifics of your work week, lunch breaks, scheduled appointments, etc.). In addition, tasks should automatically go to the calendar, and the calendar status should automatically update as tasks are rescheduled. All this can be done by the plug-in for Microsoft Outlook 2002 / XP Taskline (http://www.taskline.info/MAPI/TasklineSetup.exe, shareware, 1.2 MB) from ResultsWare Limited, which is a convenient and easy-to-use task manager, which will allow you to optimally create your schedule.

Before using the plugin, you need to configure it in accordance with the specifics of the working day. To do this, click on the button Taskline, go to the tab Working week and indicate the working days of the week, the beginning and end of the working day and all available breaks (lunch, technical break, etc.) - fig. 48.

Figure: 48. Drawing up a work schedule

Then outline the tasks ahead for the coming days. Please note that an additional tab will appear in the task creation window after installing the plugin Taskline, on which you need to indicate the estimated duration of the work, and if the work has already begun, then the amount of time spent on it and the percentage of completion (Fig. 49, 50).

Figure: 49. Create a task

Figure: 50. List of tasks scheduled for the next week

Then you can start testing the plugin. To do this, click on the button Taskline, go to the tab Tasks, indicate the start time (fig. 51) and press the button Ok... The result of the plug-in will be a brief report on the number of scheduled tasks, the total time for their completion and the deadlines for completing the work (Fig. 52). At the same time, the program will optimally place tasks in the calendar - it will take into account both all work breaks and the scheduled meetings, appointments, etc. (Fig. 53).

Figure: 51. Determination of the start time of the analysis and distribution of tasks

Figure: 52. Conclusion of the Taskline regarding the list of scheduled tasks (in this case, everything planned can be done on time)

Figure: 53. The result of the distribution of tasks in the calendar

ComputerPress 5'2004

სორტირება

Set up automatic hyphenation in WordBestMerlin

4 წლის წინ

Video tutorial on the project Antiketnik. my7sky.com Sergey Avramenko Address of the article from free training my7sky.com/...

How to make automatic word wrap in ExcelKirill Zhukov

წლის წინ

Complete and detailed basic Excel course for beginners \u003d www.ozozh.ru/r/excel.php word transfer in Excel Excel transfer ...

-Insert text into PowerPointInfobusiness - lessons

3 წლის წინ

Automatic word hyphenationSHERIFF 19

წლის წინ

How to Wrap Words in Word | Hyphenation in WordFAQ

წლის წინ

Today we will show you how to wrap words in Word. First, let's open the document. By default, word wrap is ...

Non-breaking space in Word documentsAndrey Sukhov

5 წლის წინ

A detailed course on Word, Excel and Powerpoint - goo.gl/QmDVwh When you are typing any text in microsoft program Word, prog ...

Lessons Word Trick 6 TemplatesFull training

11 თვის წინ

Passive income without invites. Watch video reviews $ 1000 franchisemain.com/?ref\u003dandreystrelnov Opportunity ...

How to set up text wrapping in Microsoft Word KompProsto

4 წლის წინ

When you first type text in Word, the default mode is set in which every word that ...

Lesson on Word. format a paragraph in 2 clicksRobert Kirakosyan

წლის წინ

Format of paragraphs (paragraphs). Spacing before and after, no orphans.

Macros. Data export and importInternetUrok.ru

წლის წინ

Most of the office tasks are solved on a computer in the MS Office environment, primarily in Word, Excel, Outlook and PowerPoint. A minimum of knowledge is sufficient to work with these applications, but in many situations, additional techniques can save you a lot of time and effort. We will consider some of the ways to improve the efficiency of work in the above programs in this article.