The profession is a printer. Flat offset printer Flatbed printer 5 category

This job description was developed and approved in accordance with the provisions Labor Code Russian Federation, List of industries, workshops, professions and positions with harmful conditions labor, work in which gives the right to additional leave and a shorter working day, approved. by the decree of the State Committee of Labor of the USSR and the Presidium of the All-Union Central Council of Trade Unions of October 25, 1974 N 298 / P-22; Model Norms free issuance of certified special clothing, special footwear and other personal protective equipment for workers of cross-cutting professions and positions in all sectors of the economy, employed in work with harmful and (or) hazardous working conditions, as well as in work performed in special temperature conditions or associated with pollution, approved. By order of the Ministry of Health and social development RF dated 01.10.2008 N 541n; Standard industry norms for the free distribution of special clothing, special footwear and other personal protective equipment to workers in the printing industry and book trade, approved. Resolution of the Ministry of Labor of the Russian Federation of December 16, 1997 N 63; Standard industry norms for the free distribution of special clothing, special footwear and other personal protective equipment to industrial workers building materials, glass and porcelain-faience industry, approved. by the decree of the Ministry of Labor of the Russian Federation of December 25, 1997 N 66 and other regulations governing labor relations.

1. General Provisions

1.1. The flat (offset) printer of the 5th category belongs to the category of workers and is directly subordinate to [the position of the head].

1.2. A person who has undergone special training is accepted for the position of a flat (offset) printer of the 5th category, without presenting requirements for work experience.

1.3. The flat (offset) printer of the 5th category is hired and dismissed by the order of [the position of the head of the organization].

1.4. The 5th grade flat-bed (offset) printer should know:

- the principle of the formation of printing and space elements in flat printing;

- varieties, formats and technical requirements applicable to paper and technical fabrics used, to printed impressions, including products of strict accountability and folded notebooks;

- passports of drawings and technical conditions on the decal;

- formats of publications;

- the types of paper used and the range of paints;

- technical requirements for offset rubber fabric, ink and dampening rollers, printed form and the materials used;

— technological process production of phototypic and electrographic forms of any complexity;

- technological process of making flat printing forms by negative and positive copying methods;

- technological process of manufacturing bimetallic printing plates;

- the principle of reproduction of half-tone and multicolor originals in flat printing;

- recipes for the solutions used;

- conditions for paper acclimatization;

- workshop conditions and their influence on the printing process;

- methods of regulation of small-format offset machines;

- elements of color science (the concept of color analysis and synthesis);

- printing and coloristic properties of paints and their interaction with paper and technical fabrics;

- rules for mixing paints;

- features of register and printing of multicolor works;

- peculiarities of preparation and methods of regulation of one-color small-format offset machines;

- rules for makeready and printing on newspaper roll units;

- densitometric control methods;

- rules for the operation of the serviced equipment;

- rules for labor protection, industrial sanitation and fire safety;

- rules for using personal protective equipment;

- requirements for the quality of work (services) performed;

- types of marriage and ways to prevent and eliminate it;

- industrial signaling;

- requirements for rational organization labor in the workplace.

2. Job responsibilities

The duties of a flat (offset) printer of the 5th category include:

2.1. Performing makeready and printing work on single-color small-format (54x70 cm inclusive) offset machines of editions with line and raster illustrations in one- and multi-color (preparation of the machine and materials for printing, participation in the form fitting, charging the feeder, lubricating the machine, receiving prints with quality control , unloading the receiving device); on preparing forms for printing.

2.2. Making adjustments and printing: on single-color small-format offset machines of highly artistic work, items of particularly strict accounting, containing guilloche and ornamental elements, acceptance of prints with quality control; on one- and two-color full-format (60x90 cm and above) offset presses of editions with illustrations - line with large graphic details, raster up to 40 lines / cm; on single-color full-format machines of editions with illustrations - line with thin graphic details, raster with lineature above 40 lines / cm; on roll-fed and sheet-fed four-color small-format offset presses of works containing line illustrations with large and small graphic details, raster illustrations with various lineatures.

2.3. Performing work on adjustment and printing on newspaper multi-roll units of newspapers and magazines.

2.4. Make-up and printing on small-format offset machines: works containing illustrations (dashed lines with large graphic details and raster ones with lineature up to 40 lines / cm, single-color and multicolor with separate arrangement of colorful elements or with the imposition of no more than two colors), background plates and fills.

2.5. Make-up and printing on small-format offset machines: one-color works with line and raster illustrations with lineatures above 40 lines / cm, as well as multi-color works with line and raster illustrations. Make-up and printing on one-, two-, four- and six-color full-format offset machines of works containing illustrations (line with large graphic details and raster with lineature up to 40 lines / cm - single-color and multicolor with separate arrangement of ink elements or with overlapping no more than two paints), background dies and fills.

2.6. Make-up and printing on monochromatic offset machines of all formats of work containing illustrations (line with small graphic details and raster with lineature above 40 lines / cm - monochromatic and multicolor with overlapping more than two colors), complex duplexes, solid light background or partial, but saturated ...

2.7. Make-up and printing on single-color small-format offset presses of works with a complex combination of colors and gradation transitions, with subtle graphic details of a guilloche and ornamental nature, solid background works. Make-up and printing on roll-fed four-color offset presses of small format of works containing line illustrations with large details and raster illustrations with lineature up to 40 lines / cm.

2.8. Performing, together with the printer, flat printing of a higher qualification work on makeready and printing: on two-color full-format offset machines - editions with line illustrations with small graphic details, raster ones with a lineature of more than 40 lines / cm, as well as cartographic editions; on one- and two-color full-format offset presses, four-color small-format offset presses for multicolor and highly artistic works; on four- and six-color sheet-fed full-format offset machines, roll-fed four- and more colorful machines of medium and large formats - publications of varying complexity; on roll-fed, sheet-fed four-color small format machines - highly artistic multi-color works; on two-, four- and six-color sheet-fed offset presses of Goznak products: works with complex gradation transitions, multi-color works with simultaneous printing with metallized paints, solid saturated background works, works with fine graphic details of guilloche and ornamental nature, raster works with a screen line up to 60 lin / cm, as well as Goznak products with simultaneous numbering printing when the number of devices is up to forty-five on a printed sheet.

2.9. Performing, together with a printer of a higher qualification, work on makeready and printing: on one-, two-color full-format machines, artistic reproduction work on technical fabrics; on four-color offset machines of special products with a complex combination of colors; on six-color sheet full-format and four- and more colorful roll-fed offset presses of medium and large formats of works of varying complexity; on newspaper rotary multi-web units of newspapers and magazines on two-, four- and six-color sheet offset machines of Goznak products; highly artistic works with complex gradation transitions; works containing small graphic details over the entire area of ​​the printed sheet; raster works with a raster lineature above 61 lines / cm, as well as Goznak products with simultaneous numbering printing when the number of devices is more than forty-five on a printed sheet.

2.10. Execution of work on the development of a phototype form of any complexity.

2.11. Supervision of work, maintenance of all types of offset machines.

2.12. Acceptance of prints and copybooks with quality control.

2.13. Unloading the receiving device.

2.14. Pressing and packing of notebooks.

2.15. Drawing up paint in accordance with the original, preparation and fitting of forms, making samples.

2.16. Overlapping sheets of paper on a slipboard printing machine, preparing paper for printing.

2.17. Prepare the charger, prepare and load paper rolls.

2.18. Installation and adjustment of the mold, installation of rubber-fabric cloth.

2.19. Inking and dampening devices regulation, feeder charging.

2.20. Elimination of malfunctions in the operation of the serviced equipment.

2.21. Charger preparation, preparation and loading of bales on high-speed multi-roll units.

2.22. Installation of blanket cylinder deckle.

3. Types of work performed

3.1. The flat (offset) printer of the 5th category performs the following types of work:

3.1.1. Adjustment and printing on small-format offset machines of newspapers, decals, accompanying documents (parcels, waste signs, invoices, etc.), maps of geographical, topographic and special with a drawing size of up to 47x108 cm in 1-6 colors, stamps, covers, endpapers , posters, book and magazine products, musical scores (sheet music for percussion instruments, popular songs, etc.).

3.1.2. Make-up and printing on sheet-fed full-format one-, two- and four-color machines of inserts, covers, endpapers, labels; maps of geographical, topographic and special with a drawing size up to 47x108 cm in 1-6 colors; posters; book and magazine products; works of music; protective nets, liners for documents of strict accounting.

3.1.3. Adjustment and printing on sheet-fed offset small-format and full-format machines of decal, strict accounting documents (certificates, certificates), illustrations for unique publications, stamps, postcards, posters, visual aids, book and magazine products, musical scores, protective nets on documents of strict accounting, labels.

3.1.4. Make-up and printing on offset roll-fed four-color small format machines for book and magazine products, labels.

4. Rights

The printer of flat (offset) printing of the 5th category has the right to:

4.1. For all social guarantees provided by law.

4.2. For additional vacation.

4.3. To receive special work clothes.

4.4. To get acquainted with the projects of decisions of the management of the enterprise concerning its activities.

4.5. Submit proposals for improving the work related to the responsibilities provided for in this instruction for the management's consideration.

4.6. Within the limits of their competence, inform the immediate supervisor about all deficiencies identified in the process of activity and make proposals for their elimination.

4.7. Require the creation of conditions for the performance of professional duties, including the provision of necessary equipment, inventory, workplace, corresponding to sanitary and hygienic rules and regulations, etc.

4.8. Improve your professional qualifications.

4.9. To other rights provided for by labor law.

5. Responsibility

The flat (offset) printer of the 5th category is responsible for:

5.1. For non-performance or improper performance their job duties stipulated by this job description - within the limits determined by the current labor legislation of the Russian Federation.

5.2. For causing material damage to the employer - within the limits determined by the current labor and civil legislation of the Russian Federation.

5.3. For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal, civil legislation of the Russian Federation.

Job description of the printer of flat (offset) printing of the 5th category

Take advantage of the unique opportunity to study at the most modern printing company PC "Pushkinskaya Ploshchad"!

Classes are taught by:Ph.D. E.V. Razinkin(Head of the department of technical and production development of the PC "Pushkinskaya Ploshchad")

TRAINING PROGRAM:

1. Labor protection in the workplace, protection measures.
2. Characteristics of flat offset printing.
3. Imposition of strips in offset production.
4. Printing forms in offset production.
5. Study of the device and the principle of operation of a two-color offset machine.
6. Preparing the machine for printing.
7. Preparation of the humidifier.
8. Preparation of the inking apparatus.
9. Preparation of the paper system.
10. Printing of fitting prints.
11. Printing of circulation from text forms.
12. Product quality control when printing a run
13. Maintenance cars.
14. Units of measurement used in the printing industry.
15. Technical and technological requirements for the main and auxiliary materials of the printing industry.
16. Workshop conditions and their influence on the printing process (temperature and humidity).
17. The concept of color analysis and synthesis (elements of color separation).

Course cost:30,000 rubles.

Discounts:from 3 representatives of one organization -10% .

The printer is engaged in the manufacture of printed products: magazines, booklets, leaflets, business cards, catalogs and other types of it. In addition, the specialist performs post-printing processing of products - cutting, lamination, packaging, etc.

In addition to this, the profession of a printer includes communication with the equipment: its preparation for printing, maintenance (cleaning, lubrication, troubleshooting, replacement of parts), as well as monitoring the printing process.

Places of work

The position of a printer is available in all organizations related to the printing industry:

  • at printing enterprises;
  • in advertising agencies;
  • in design studios and other similar companies.

History of the profession

Also in Ancient China there lived craftsmen who made movable words from baked clay. In the 15th century, several candidates appeared at once, creating movable letters and claiming the title of the first book printer, which as a result went to Johann Gutenberg. In Russia, the first printed book was published by Ivan Fedorov in 1564.

Mass teaching of book printing began at the end of the 19th century: in St. Petersburg - at the school of printing of the Russian Technical Society (since 1884 - the first such educational institution of this kind in Europe) and at the school at the printing house of A.S. Suvorin, as well as in Leipzig, Paris and other cities. Approximately this time (the end of the 19th century) can be considered the time of the birth of the printing profession.

Duties of the printer

The job responsibilities of a printer may vary from one plant to another. So, they may include:

  • silk-screen and thermal transfer printing on various machines (risograph, digital equipment, large-format plotter);
  • setting up, starting and managing equipment, monitoring its technical condition;
  • mixing pantone paints;
  • quality control of printing and products;
  • prepress and post-print processing;
  • production of photo and polymer stamps.

Also, the printer's functions may include accepting orders for operational printing, optimizing raw material costs, packing printed runs, etc.

Requirements for the printer

The standard requirements for a printer are as follows:

  • secondary special education;
  • experience in printing;
  • knowledge Adobe programs Photoshop, CorelDRAW;
  • knowledge of materials for printing;
  • knowledge of machine tools and printing technologies (preparation, process and control of finished products).

Printer Resume Sample

How to become a printer

To become a printer, you need to get an education in the field of printing or typography. You can, of course, do without it (for example, hire a printer assistant) to study the basic properties of paints, methods of color correction, paper grades, machines and others. necessary materials and equipment. In the second case, one cannot initially count on a decent salary, and later there may be problems with employment, since diplomas are still valued and are important in employment.

Printer salary

Depending on the work experience and qualifications of the employee, the wages of the printer can vary significantly, ranging from 10 to 60 thousand rubles a month.

Of course, it depends on the enterprise and the region and on the complexity and scope of responsibilities. average salary the printer is about 35 thousand rubles a month.


Carrying out, together with a printer of a higher qualification, work on makeready and printing on two-, four- and six-color sheet-fed offset machines of especially complex brands with facsimile image accuracy, Goznak products containing more than three colors with simultaneous numbering printing and products using luminous paints. Make-up and printing on small format four-color roll-fed machines of works containing illustrations (line art with small graphic details and raster ones with lineature above 40 lines / cm), as well as highly artistic works. Make-up and printing on roll-to-roll four or more ink presses of medium and large formats for jobs of varying complexity. Make-up and printing of products on newspaper roll units. Printing from phototype forms of any complexity on various types of offset presses. Moisturizing. Drying and installation of the mold in the serviced machine.

Flatbed printer

Offset printer what it is To make it clearer for you, we will show step by step what the printer must do to print the print run of printed products: 1. Get the job from the shift master, and technical data for the next order: name, number of colors, print run, dimensions products, placement of individual elements on the print, etc. 2. If the next edition is printed with different paints from the previous one, then you need to wash off the paint from the rollers, clean the trough, and roll up the new paint.
If necessary, add additives to the paint and dampening solution. You should also wash the cylinders (printing and offset). offset printer (photo) 3. In the prepress shop you need to take offset printing forms to print your circulation.
The worker marks the received forms (if necessary) and installs them in the machine. 4.

Offset printer what is this specialty

You need to know and be able to: technological process of manufacturing bimetallic printing plates; elements of color science (the concept of color analysis and synthesis); printing and color properties of paints and their interaction with paper and technical fabrics; rules for mixing paints; features of register and printing of multicolor works; peculiarities of preparation and methods of regulation of one-color small-format offset machines; make-up and printing rules on newspaper roll units; densitometric control methods. Responsibilities Adjustment and printing of multicolor highly artistic works on small-format offset machines.

403 forbidden

Legislative and regulations related to the work being performed. 3.2 Internal documents: Charter of the printing house, Orders and orders of the director of the printing house (head of production); Regulations on the printing house, Job description of the flatbed printer, Internal labor regulations.

  1. Job responsibilities of a flatbed printer

4.1. Before the start of the working day, the flatbed printer: - undergoes periodic medical examinations; - takes place in the prescribed manner instructing on labor protection; - takes workplace; - prepares the workplace and personal protective equipment; - checks the serviceability of equipment, fixtures and tools, fences, alarms, interlocks and other devices, protective grounding, ventilation, local lighting etc.; - receives raw materials, materials and semi-finished products; 4.2.

Job description of the printer of flat (offset) printing of the 5th category

Performing, together with a printer of a higher qualification, work on makeready and printing: on one-, two-color full-format machines, artistic reproduction work on technical fabrics; on four-color offset machines of special products with a complex combination of colors; on six-color sheet full-format and four- and more colorful roll-fed offset presses of medium and large formats of works of varying complexity; on newspaper rotary multi-web units of newspapers and magazines on two-, four- and six-color sheet offset machines of Goznak products; highly artistic works with complex gradation transitions; works containing small graphic details over the entire area of ​​the printed sheet; raster works with a raster lineature above 61 lines / cm, as well as Goznak products with simultaneous numbering printing when the number of devices is more than forty-five on a printed sheet. 2.10.
Onslaught regulation. Getting a proof print. Form development (additional moisturizing and tanning). Drawing up paint in accordance with the original. Preparing paper. Should know: technical requirements for phototype forms and numbering machines; firing modes ceramic products; rules for changing paints during firing; methods of regulation of role-playing, as well as one-, two- and four-color full-format offset machines; device and principle of operation of mechanisms of small-format offset machines.
Examples of work Fitting and printing on sheet-fed offset two- and four-color machines 1. Postcards. 2. Posters. 3. The manuals are visual. 4. Book and magazine products. 5. Labels. Make-up and printing on all types of offset presses 1.
Decal. 2. Documents of strict accounting (letters of credit, certificates, checks). 3. Highly artistic editions. 4.

Profession flat print printer

Music scores (sheet music for percussion instruments, mass songs, etc.). You need to know and be able to: the technological process of making flat printing forms by negative and positive copying methods; the principle of reproduction of half-tone and multi-color originals in flat printing; recipes for the solutions used; conditions for paper acclimatization; shop conditions and their influence on the printing process; methods of regulation of small-format offset machines. Responsibilities Adjustment and printing on small-format offset machines: one-color work with line and raster illustrations with a lineature above 40 lines / cm, as well as multi-color work with line and raster illustrations.

What does a flatbed printer do

The flatbed printer at the end of the working day: - hand over unused raw materials, materials and semi-finished products; - carries out cleaning of the workplace; - submits production waste in accordance with the established procedure; - hand over the workplace;

  1. The rights of the flatbed printer

The flatbed printer has the right to: 5.1. To get acquainted with the draft decisions of the management of the organization concerning its activities. 5.2. Submit proposals for improving the work related to the responsibilities provided for in this job description for the management's consideration.


5.3. Require the management of the printing house to assist in the performance of their duties and rights.
  1. Responsibility of the flatbed printer

The flatbed printer is responsible for: 6.1.

What is a flatbed printer

Make-up and printing on two-, four- and six-color full-format offset machines of works containing illustrations (schlich with small graphic details and raster ones with a lineature above 40 lines / cm - single-color and multicolor with overlapping more than two colors), complex duplexes, solid light background or partial, but rich. Make-up and printing on offset sheet-fed machines of all types of highly artistic multicolor works with a large number of colors, a complex combination of colors and gradation transitions; solid background works with inverted text printing; works with delicate graphic details of guilloche and ornamental character.
Make-up and printing on one-, two-, four- and six-color full-format offset machines of works containing illustrations (line with large graphic details and raster with lineature up to 40 lines / cm - single-color and multi-color with separate arrangement of ink elements or with overlapping not more than two colors), background dies and fills. Installation of blanket cylinder deckle. Make-up and printing on monochromatic offset machines of all formats of work containing illustrations (line with small graphic details and raster with lineature above 40 lines / cm - monochromatic and multicolor with overlapping more than two colors), complex duplexes, solid light background or partial, but saturated.

1.1 This job description defines functional responsibilities, the rights and responsibilities of the flatbed printer.

1.2 The flatbed printer belongs to the category of technical performers.

1.3 A flatbed printer is appointed and dismissed in accordance with the procedure established by the current labor legislation by order of the director of the printing house on the proposal of the head of production.

1.4 Relationship by position:

1.4.1

Direct subordination

production manager

1.4.2.

Additional subordination

−

1.4.3

Gives orders

−

1.4.4

The employee replaces

person appointed by the director of the printing house

1.4.5

The employee replaces

−

  1. Flat Print Printer Qualifications:

2.1.

Education

secondary vocational

2.2

work experience

No requirements for work experience

2.3

knowledge

the principle of formation of printing and space elements in flat printing;

grades, formats and technical requirements for the paper and technical fabrics used, for printed impressions;

drawings passports and decal specifications;

formats of publications;

the types of paper used and the range of paints;

technical requirements for offset rubber fabric, ink and dampening rollers, printing plate and materials used;

technological process of making flat printing forms;

the principle of reproduction of half-tone and multi-color originals in flat printing;

recipes for the solutions used;

conditions for paper acclimatization;

shop conditions and their influence on the printing process;

elements of color science (the concept of color analysis and synthesis);

printing and color properties of paints and their interaction with paper and technical fabrics;

rules for mixing paints;

features of register and printing of multicolor works;

technical requirements for phototype forms and numbering machines;

firing modes of ceramic products;

rules for changing paints during firing;

methods of regulation of offset machines;

basic principles of the theory of automatic regulation of technological processes;

printing and color properties of metallized and luminous paints;

requirements for safe handling of raw materials (raw materials, blanks, semi-finished products);

technical requirements for semi-finished products and finished products;

characteristics of hazardous and harmful production factors;

instructions for the safe maintenance of the workplace;

the main types of deviations from the normal technological regime and methods of their elimination;

actions aimed at preventing emergency situations;

requirements for the use of protective equipment;

methods and techniques for the safe performance of work;

operating rules and regulation techniques technological equipment, fixtures and tools;

the procedure for notifying the manager of all deficiencies discovered during work;

the order of actions in the event of accidents and situations that may lead to undesirable consequences;

rules for providing first (pre-medical) aid to victims of injuries, poisoning and sudden illness;

internal labor regulations;

rules of labor protection, industrial sanitation and personal hygiene, fire safety;

2.4

skills

−

2.5

Additional requirements

−

  1. Documents regulating the activities of the printer of flat printing

3.1 External documents:

Laws and regulations related to the work performed.

3.2 Internal documents:

The charter of the printing house, Orders and orders of the director of the printing house (head of production); Regulations on the printing house, Job description of the flatbed printer, Internal labor regulations.

  1. Job responsibilities of a flatbed printer

4.1. The flatbed printer before the start of the working day:

Undergoes periodic medical examinations in accordance with the established procedure;

In accordance with the established procedure, instruction on labor protection is carried out;

Accepts a workplace;

Prepares the workplace and personal protective equipment;

Checks the serviceability of equipment, fixtures and tools, fences, alarms, interlocks and other devices, protective grounding, ventilation, local lighting, etc.;

Receives raw materials, materials and semi-finished products;

4.2. In the process of work, the flatbed printer:

Complies with the requirements of personal hygiene and industrial sanitation;

Complies with the rules for the use of technological equipment, devices and tools, methods and techniques for the safe performance of work;

Eliminates problems in the operation of the serviced equipment;

Immediately informs the immediate supervisor of any shortcomings discovered during work;

Provides first (first aid) aid to victims of injuries, poisoning in emergency situations and sudden illness;

4.3. During the working day, the flatbed printer:

Charges the feeder;

Carries out work on makeready and printing of all formats of work on offset machines of various types;

Composes paints according to the original;

Carries out preparation and adjustment of forms;

Prepares samples;

Places sheets of paper on the overlap board of the printing machine;

Prepares paper for printing;

Prepares the charger;

Prepares and loads paper rolls;

Installs a rubber-fabric cloth;

Sets the blanket cylinder deckle, moisturizes it;

Carries out drying and installation of the form in the serviced machine;

Regulates the onslaught;

Receives a proof print;

Produces form development (additional moisturizing and tanning);

Reads a printed form;

Accepts prints and products;

Checks the quality of products;

Unloads the receiving device;

Carries out pressing and packaging of products;

4.4. Flatbed printer at the end of the working day:

Hand over unused raw materials, materials and semi-finished products;

Carries out cleaning of the workplace;

Hands over production waste in the prescribed manner;

Rents out a workplace;

  1. The rights of the flatbed printer

The flatbed printer has the right to:

5.1. To get acquainted with the draft decisions of the management of the organization concerning its activities.

5.2. Submit proposals for improving the work related to the responsibilities provided for in this job description for the management's consideration.

5.3. Require the management of the printing house to assist in the performance of their duties and rights.

  1. Responsibility of the flatbed printer

The flatbed printer is responsible for:

6.1. For improper performance or non-performance of their duties provided for by this job description - within the limits determined by the current labor legislation of Ukraine.

6.2. For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.

6.3. For causing material damage - within the limits determined by the current labor and civil legislation of Ukraine.

6.4. The flatbed printer is financially responsible for ensuring the safety of the inventory items entrusted to him.

  1. Working conditions of a flatbed printer

The mode of operation of a flatbed printer is determined in accordance with the Internal Labor Regulations established in the printing house.

  1. Terms of remuneration

The terms of remuneration of the flat-print printer are determined in accordance with the Regulations on the remuneration of personnel.

9 Final provisions

9.1 This Job Description has been drawn up in two copies, one of which is kept by the printing house, the other by the employee.

9.2 Tasks, Duties, Rights and Responsibilities can be clarified in accordance with changes in the Structure, Tasks and Functions structural unit and workplace.

9.3 Changes and additions to this Job description introduced by order of the director of the printing house.

Head of structural unit

(signature)

(surname, initials)
AGREED:

Head of the legal department

(signature)

(surname, initials)

00.00.0000

I have read the instructions:

(signature)

(surname, initials)

00.00.00

 

It might be helpful to read: