References - organization of equipment repair and maintenance. Up-to-date list of literature: "Equipment of enterprises" Literature on equipment

Catalogs, books, brochures:

Literature for chapter 1

1. Machine for sharpening microtome knives. Instrument-making firm "Sakura". Firm catalog. Tokyo, 1969, p. 4.
2. Analytical ultracentrifuge, model. E. Laboratory centrifuges, company catalog.
3. Apparatus for obtaining pyrogen-free water AA-I, model 795. M., 1965, p. 32.
4. Apparatus for removing solid culture media from laboratory glassware... Laboratory equipment (catalog). M., 1970, p. 72.
5. Analytical balance AVIV S / 3.- "Laboratory equipment", 1972, No. 5, p. 26.
6. Scales and weighing devices, part 1. M., 1967, p. 53.
7. Voskresensky P.I. Technique laboratory work... M., 1973.
8. Glukhova MN Bacterial contamination of deionized water in conditions of its industrial pollution .- "Uchen. app. Gorkovsk. un-ta ", ser. biol., 1970, V. 105, p. 23.
9. State Pharmacopoeia of the USSR. 10th ed. M., 1968.
10. Kasatkin AG Basic processes and apparatuses of chemical technology. M., 1971.
11. Katz AM and Kantorovich AS Measuring and dosing devices for clinical diagnostic laboratories. L., 1970.
12. KEA-62 - a device for obtaining demineralized and deionized water. Exports of the GDR. Laboratory technology. Separate issue, Berlin, 1967, p. 16.
13. Keil B. (ed.). Laboratory technology of organic chemistry. M., 1966.
14. Brief chemical encyclopedia, v. 5. Centrifugation. M., 1967.
15. Torsion balance "Metrimpex", type B-411/1 Flax. Center, Scientific and Technical Information WIS, 30113, 1970.

16. Laboratory scales and mass measuring equipment. M., 1972.
17. Laboratory equipment (catalog). M., 1970, p. 109.
18. Laboratory technology. Exports of the GDR. Dept. no. Berlin, 1967, p. fourteen.
19. Lotz Yu. A. and Ozherelev A. Ya. Analytical centrifuges. Sat. "Unique devices CMEA", 1970, p. 5.
20. Magnetic stirrer MM-3. Technical description and instructions. Kievsky zd medical equipment. Kiev, 1972.
21. Machine for washing laboratory glassware. Technical description and instruction manual. Moscow plant "Technologist", 1969.
22. Machine for washing laboratory glassware (small model). Penza, 1968.
23. Medical devices, apparatus and instruments (catalog). Production Association "Krasnogvardeets". L., 1968.
24. Medical devices and apparatus. Kharkov, 1971.
25. Microthermostat MT-03. Catalog. Products of the Odessa plant of medical equipment. Odessa, 1968, p. fourteen.
26. Microtomes. V / O Medexport (catalog). M., 1970, p. 2.
27. Petrishchev IP and Nedelko VV Operational experience of electric distillers.- "Pharmacy", 1973, No. 3, p. 70.
28. A device for shaking melangeurs. Kiev, 1973.
29. Adaptation areometric to scales VT-500 (OUV-1). Information sheet. Linen. Center for Scientific and Technical Information, 1971.
30. Tissue shredder RT-1. Odessa plant of electromedical equipment. Odessa, 1968.

31. Modern tendencies in the application and improvement of liquid flow thermostats. German export. GDR, 1971, p. 17.
32. Sokolov V. I. Modern industrial centrifuges. M., 1967.
33. Machine for sharpening microtome knives. New medical devices... Soyuzmedtekhnika (catalog), part II. M., 1970, p. 29.
34. Machine for sharpening microtome knives. Sakura company brochure in Russian. lang., 1969.
35. Supercentrifuge "Super Speed-75" MSE company brochure. London, 1970.
36. Thermostat for wax filling. Products of the Odessa plant of medical equipment (catalog). Odessa, 1969, p. nine.
37. TC-80 thermostat, electric dry-air. Technical description and instruction manual. Odessa, 1971.
38. Thermostat MT-1,2. Information sheet of the Leningrad Center for Scientific and Technical Information. L., 1972.
39. Ultramicrotome piezoelectric UMTP-1. Prospectus of the Sumy Plant of Electron Microscopes. Sumy, 1970.
40. Ultrathermostat UT-15. Technical description and instruction manual. Odessa, 1972.
41. Centrifuges. Prospectus of the company Hirana, Czechoslovakia. Prague, 1971.
42. Electric drying cabinet, round. Catalog of the Odessa plant of medical equipment. Odessa, 1967.
43. Electric drying cabinet, rectangular. ShS-40M. Catalog of the Kazan plant of medical equipment. Kazan, 1969.
44. Electronic device for shaking up TH VS-1. Laboratory technology. Dept. no. Berlin, 1967, p. 13.
45. "Electrothermal". Prospectus of the company. Laboratory equipment. Miniature stirrer 1 E. London, 1967, no. 471.

46. Auto-Mix laboratory Blenders. MSE Publication 430A, 1972.
47. Destillirapparatur TQS. - "Acta Med. Techn.", 1971, p. 288.
48. Spfilmaschinen. - Feinmechanik-Optik, 1967, S. 16.
49. Homogeniser. MSE Publication, No. 431, 1970.
50. Keil B., Sormova Z. Laboratoriumstechnik fur Biochemiker. Leipzig, 1965.
51. Laboratory centrifuges. AB Lars Ljungberg a. Co. Stockholm, 1970.
52. Laboratoriumi Felszerelesek Gyara. Budapest, 1967.
53. Lauda-Ultra-Thermostate. - "Acta Medicotechn.", 1969, No. 4, p. 111.
54. Manuel dApplication AM 202. Millipore Corporation. N. Y., 1970.
55. Automixer. MSE Publication N 666, 1970.
56. Mettler Balances. News a. Review, Gallencamp, London, 1972, p. fourteen.
57. Balances EF-15 .- "New a. Review", Gallencamp, London, 1971, No. 24, p. 5.
58. Drying cupboard OW-880 .- "News a. Reiview", Gallencamp, London, 1971, v. 24, p. ten.
59. Drying plate WD-215.- "News a. Review", Gallencamp, London, 1971, v. 24, p. eleven.
60. UL-150 - News a. Review, Gallencamp, London, 1971, v. 24, p. 19.
61. Pelcool frezing Stage. MSE Publication N 1001 / A, 1970.
62. Scandon-centrifug.-Tools for the Scientist. London, 1971.
63. Technicka documentace. Chirana. SUS 9/1, 9/11. Praha, 1971.
64. TEK 2M / 0672. Cambridge Scientific Instruments Limited. London, 1970.
65. TEK 2 / M0673, Cambridge Scientific Instruments Limited. London, 1970.
66. Torbal PL-12. - Science, 1973, v. 181, No. 4106, p. 1242.
67. Ultratom-111, der LKB-producter AB. - "Medizinal Markt", 1972, H. 1, S. 23.
68. Unipam Gomogenizator 342. Wissenschaftlicher Geratebau der Polnischen Akademie der Wissenschaften. - "Labortechnik", 1971, H. 4, S. 31.
69. Vollautomat "Meteor Brillant-25" - "Medizinal-Markt", 1972, H. 3, S. 12.
70. Waagenfabrik Oschatzer. - "Feinmechanik-Optik", 1967, H. 2, S. 65.

Reference book in 4 volumes / Ed. advice of E.I. Semenov et al. -M .: Mechanical engineering. -T.1 Materials and heating. Equipment. Forging. / Ed. E.I. Semenov -1985. 568s., Ill.

The first volume contains information on materials, their deformability, division into blanks, thermal conditions of forging and stamping. Flame furnaces and electric heating devices, general-purpose forging and stamping equipment are described. The features of automation and mechanization are noted technological processes stamping and forging, stamping design automation, quality control of forgings, as well as heat treatment of forgings. Technical and economic indicators of the work of forging shops and information on labor safety standards are given. The features of forging of tool and high-alloy heat-resistant steels and non-ferrous alloys are stated.

In the second volume, recommendations are given on the assignment of tolerances, allowances and overlaps on stamped forgings. Examples of design of technological processes of volumetric hot stamping on various equipment are given. Recommendations are given that are necessary for the design and calculation of dies and streams made in these dies. Attention is paid to special types of stamping: knurling, rolling, electric upsetting, etc. The features of volumetric hot stamping of tool and high-alloy steels, as well as non-ferrous alloys are described. The information on finishing and cleaning of forgings, control of their quality, operation and repair of stamping equipment is given.

The third volume provides information on the main operations of cold forging, the design of die tooling and the selection of individual standard sizes of equipment and automatic lines... The properties, in particular, of the preparation of metal when stamping parts on presses and automatic machines are described.

Data on cold and semi-hot stamping of blanks from carbon and alloy steels, as well as non-ferrous alloys, requirements for the quality of finished parts, technical and economic indicators are presented.

Calculation formulas and graphs for determining the pressures on the tool and deforming forces for various shaping operations are presented. The concepts of automation of design of cold die forging processes are given.

The fourth volume contains the classification and methodology for calculating sheet stamping operations, outlines the basics of designing technological processes. Recommendations are given on the selection and optimization of cutting, application lubricants, the definition of deformation, power and energy characteristics... Calculations of the parameters of shape change and limiting shape change are given. Examples of calculation and design of technological processes are considered. Typical designs of dies and recommendations for their selection, as well as the main types of specialized equipment are presented.

The handbook is intended for engineering and technical workers machine-building enterprises, can be useful for teachers and students of technical colleges.

Page 26 of 26

Borisov Yu. S. and Zhukov G. P. Methods of planning repairs of factory equipment by the method of reduction to conventional units of repair complexity. - "Organization of production", 1934, No. 9, p. 16-21.
Borisov Yu.S. and Zhukov G.P. Our method of planning repairs. - "Enterprise", 1934, No. 21, p. 36-39.
Borisov Yu. S. and Zhukov G. P. Rational system of remuneration of mechanics for the repair of factory equipment. - " Technical regulation", 1934, No. 12, p. 5-8.
Borisov Yu. S. and Zhukov G. P. System of periodic repairs of equipment of machine-building enterprises. M., Oborongiz, 1939.242 p.
Borisov Yu. S. and Zhukov G. P. Valuable experience of the Ordzhonikidze plant. "Mechanical Engineering", 1938, No. 21 (106).
Borisov Yu. S. On the main theoretical provisions of the system of planned preventive equipment repair. - "Bulletin of mechanical engineering", 1964, Oia 10, p. 8-10.
Borisov Yu. S. Basic theoretical provisions of the system of preventive maintenance of equipment and some practical conclusions from them. In the book: Some questions of the system of scheduled preventive1 equipment repair. M., ed. NTO Mashprom, 1964, p. 9-18.
Borisov Yu. S. Preventive maintenance of equipment in the industry of the USSR. M., Mashgiz, 1949.83 p.
Borodin Η. F., Yanovskiy V.V., Pozdnov I.P. Maintenance and repair technological equipment at the Volzhsky Automobile Plant. In the book: Repair and modernization of technological equipment in the conditions of scientific and technological progress. M., ed. NTO Mashprom, 1975, p. 43-58.
Vlasov B.V., Gamaleya B.N. To improve the organization of work of auxiliary workers. - "Mashinostroitel", 1966, No. 10, p. 6-7.
The organization of production in the United States. M., Publishing house foreign literature, 1956, 100 p.
Glazer V.E. Practical conclusions from the main theoretical provisions of the system of scheduled preventive maintenance. In the book: On the further improvement of the system of preventive maintenance of equipment in the machine-building industry. M., ed. NTO Mashprom, 1966, p. 64-69.
one system scheduled preventive maintenance and rational operation of technological equipment at machine-building enterprises. Ed. 6th. M., "Mechanical Engineering", 1967, 591 p.
Zaslavsky A. S. Ensuring reliable operation of automatic lines. - "Mashinostroitel", 1963, No. 10, p. 9-10.
Ivanov Η. P. and Noskin R.A. Development and improvement of the organization of repair industrial equipment in USSR. In the book: Technique, technology and economics of equipment repair. M., ed. NTO Mashprom, 1927, p. 5-14.
Klimov A. N. and Popova L. G. Organization of repair of production equipment of machine-building enterprises. L., "Mechanical Engineering", 1975, 144 p.
Klyagin V.I. Industrialization of equipment repair carried out in the repair services of the enterprise. In the book: Improving the organization, economy and quality of repair of technological equipment in the engineering industry. Voroshilovgrad, ed. NTO Mashprom, 1973, p. 40-51.
Kunyavsky I.A. Organization of lubrication facilities at machine-building enterprises. M., "Mechanical Engineering", 1974, 52 p.
Pekelis G. D. and Gelberg B. T. Technology of repair of metal-cutting machines. L., "Mechanical Engineering", 1970, 318 p.
Popov A.G. Accounting and renewal of spare parts for plant equipment through mechanical repair shops. - "System and Organization", 1927, No. 8-9, p. 5-15.
LS Pustoin. Improving the technical level and efficiency of equipment repair at the enterprises of tractor and agricultural engineering. In the book: Improving the organization and technology of equipment repair in the machine-building industry. Lviv, ed. NTO Mashprom, 1971, p. 24-32.
Pustoin L.S., Gorchukov K.A., Zheldakov I.Ya. Maintenance metal-cutting equipment at machine-building plants. M., "Mechanical Engineering", 1974, 43 p.
Remmashtrest. Typical system of preventive maintenance of equipment. M., ONTI, 1937, 223 p.
Spiridonov V.V. System of scheduled preventive maintenance. M.-L., "Standardization and rationalization", 1934, 86 p.
Usatov A.I. Destruction of the spent emulsion. "Mashinostroitel", 1966, No. 1, p. NS.
Tsyganov E. Nodal repair of equipment at KhTZ. - "Mashinostroitel", 1956, No. Yu, p. nine.
Shein gold E.M. Mechanization of repair of forging and pressing equipment. - "Mashinostroitel", 1963, No. 3, p. 41-45.
Economics and organization of equipment repair in the United States. Per. from English Ed. M. L. Shukhgalter. M., "Progress", 1969. 326 p.
Yakobson M.O. Scheduled preventive maintenance in mechanical engineering. M., "Mechanical Engineering", 1969. 151 p.
Yakovlev A.I. Organization of lubrication facilities. - "Mashinostroitel", 1963, No. 10, p. 10-11.
McKenzie J. Preventive Maintenance Schedulding and Control. In: Techniques of Plant Engineering and Maintenance, 1966.
Munts L. Machine Tools under Preventive Maintenance. In: Techniques of Plant Engineering and Maintenance, 1964.
Nemec Y. The Theory and Practice of RM in a Continuous Process Plant. In: Techniques of Plant Engineering and Maintenance, 1965.
Krivanc K M., Horalek J. Zvysovani ucinnosti preventivnicb periodickych oprav ve strojirenstvi snte, Praha, 1963.

Conclusion

In progress term paper a number of stages have been passed:

1. The trade and technological equipment was considered, which represents various constructive equipment of the store, namely: furniture, inventory, and other items and tools that are necessary to ensure the most efficient operation of the store and its divisions.

2. The company was considered, and its organizational, legal and economic characteristic... Form - society with limited liability... Carried out economic analysis revealed the following points: key indicators such as turnover, net profit increased, and indicators such as production costs, operating costs decreased, which indicates effective work enterprises.

3. Various configuration principles have been studied trading floor, which gave a complete picture of an effective organization and optimal configuration a trading floor with various versions of its execution (constructive and technological features of the construction).

The work carried out allows us to judge the correctness of the strategy chosen by the store and the principles of placement of commercial equipment and shows that both are chosen correctly and are optimal for the given organization.

The knowledge gained will help me in the future to improve the efficiency of the planning of sales areas.

Bibliography

1. Arustamov E.A. Equipment for enterprises (trade): Textbook. manual / E.A. Arustamov. - M .: Publishing House "Dashkov and K", 2000. - 451s.

2. Berman B., Evans J.R. Retail: A Strategic Approach. - 8th edition: Per. from English - M .: Publishing House "Williams", 2003.

3. Blank I.A. Control trade enterprise... - M .: Association of Authors and Publishers. TANDEM. EKMOS Publishing House, 2004.

4. Gusev B.K. Equipment for enterprises (trade): Textbook. allowance / B.K. Gusev, G.A. Utkin; Krasnoyar. state bargain. - econom. in-t. - Krasnoyarsk, 2006 .-- 300 p. Kashchenko V.F., Kashchenko L.V. Retail store equipment: Tutorial... - M .: Alpha-M; INFRA-M, 2006 .-- 398 p.

5. Dashkov L.P. Commerce and trade technology: Textbook / L.P. Dashkov, V.K. Pambukhchiyants, O.V. Pambukhchiyants. - 11th ed., Rev. and add. - M .: Publishing and Trade Corporation "Dashkov and K", 2011.

6. Zubkova I.N. Organization of trade in non-food products: textbook. allowance / I.N. Zubkov. - M .: Dashkov and K, 2000 .-- 347 p. , page 124

7. Levi M., Veitz B.A. Basic retail trade / Per. with eng. - SPb., 2010

8. Lei M. Basics retail: monograph / M. Ley, B. Weitz. - SPb .: Peter, 2003 .-- 328 p.

9. Nikolaeva TI Systematic assessment of the efficiency of commercial activities of trade enterprises: Textbook / Yu.S. Bernadskaya, S.S. Marochkin, L.F. Smotrov. Ed. L.M.

10. Equipment of trade enterprises and Catering: Complete course: Textbook / Ed. prof. V.A. Gulyaev. - M .: INFRA-M, 2002 .-- 543 p.

11. Osipova L.V., Sinyaeva I.M. Fundamentals of commercial activity / Student for universities. - M .: Unity., 2008.

12. Pambukhchiyants O.V. Organization and technology of commercial activity: a textbook for university students / O.V. Pambukhchiyants. M .: Dashkov and K, 2010 - 639p.

13. Polovtseva F.P. commercial activity: textbook. for universities / F.P. Polovtseva; Ministry of Education of the Russian Federation. - M.: Infra-M, 2011 .-- 248 p. : ill. ; 21 cm - ( Higher education). - Bibliography: p. 241-243. - ISBN 978-5-16-002274-1.

14. Modern supermarket: A textbook on modern forms of trade. - 3rd ed., Rev. and add. - M .: Zhigulsky Publishing House / LLC Business Tu Business Production Group "BBP-G", 2003.

15. Chaikin B.I. Enterprise Economics: Textbook. / Scientific. Ed. B.I. Chaikin, V. Zh. Dubrovsky. - Yekaterinburg: Ural Publishing House. State Econ. University, 2002 - 505 p.

16. Yakishev O.G. Organization of production and enterprise management: Textbook. Ed. O. G. Turovets; Retz. Yu.P. Aniskin, Yu.M. Soldier. - 2nd ed. - M .: INFRA-M, 2009.

It might be helpful to read: