Job description of the operator of duplicating machines. Operator of copying and duplicating machines of the 1st category Job description of copier operator

font size

Current edition

DECISION of the Ministry of Labor of the Russian Federation dated 10-11-92 31 (revised from 04-02-97) ON APPROVAL OF TARIFF AND QUALIFICATION CHARACTERISTICS FOR ... Actual in 2018

OPERATOR OF COPIES AND MULTIPLAYERS

2nd category

Description of the work. Copying the original onto paper or a plate on copying and duplicating electrographic machines and machines of various systems and designs. Setting the copy mode, enlarging copies, reproducing them from plates or films, checking the quality of copying. Disassembly and alignment of the printed sheets with the original, stapling the set on the stitching machine. Preparation of equipment and materials for work, regulation of equipment in the process of work and its cleaning. Maintaining the established documentation.

Should know: types of copying and duplicating electrographic machines, the principle of operation and rules for their operation; rules for establishing the copying mode; device and rules for the operation of collating and stitching machines; rules for maintaining documentation.

When performing copying works at a color copying supercomplex - 3rd category.

The tariff and qualification characteristics of the profession "Operator of copiers and duplicating machines" are required to determine the types of work, tariff rate and assignment of ranks according to the Russian Federation.

Based on the specified characteristics of the work performed and the requirements for professional knowledge and skills, the job description of the operator of copying and duplicating machines is drawn up, as well as personnel documents, including for interviewing and testing when hiring.

When drawing up work (job) instructions, it is necessary to take into account the general provisions and recommendations for the release, if the information is not enough, refer to the search for a profession through alphabetical order.

1. Operator of copying and duplicating machines 2nd category

Description of the work. Copying the original onto paper or a plate on copying and duplicating electrographic machines and machines of various systems and designs. Setting the copy mode, enlarging copies, reproducing them from plates or films, checking the quality of copying. Disassembly and alignment of the printed sheets with the original, stapling the set on the stitching machine. Preparation of equipment and materials for work, regulation of equipment in the process of work and its cleaning. Maintaining the established documentation.

Must know: types of copying and duplicating electrographic machines, the principle of operation and rules for their operation; rules for establishing the copying mode; device and rules for the operation of collating and stitching machines; rules for maintaining documentation.

2. Operator of copiers and duplicators, 3rd category

When performing copying works at a color copying supercomplex.

0.1. The document comes into force from the moment of its approval.

0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.3. The document has been agreed upon: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.4. Periodic check of this document produced at intervals not exceeding 3 years.

1. General Provisions

1.1. The position "Operator of copying and duplicating machines of the 1st category" belongs to the category "Technical employees".

1.2. Qualification Requirements- complete general secondary education and vocational education or complete general secondary education and vocational training at work. Work experience as an operator of copying and duplicating machines of the II category - at least 1 year.

1.3. Knows and applies in activities:
- types of copying and duplicating electrographic machines, the principle of operation and the rules for their operation;
- the rules for establishing the copying mode;
- device and rules of operation and sheet-picking and wire-sewing machines;
- rules for maintaining documentation.

1.4. The operator of copying and duplicating machines of the 1st category is appointed and dismissed by order of the organization (enterprise / institution).

1.5. The operator of copying and duplicating machines of the 1st category is directly subordinate to _ _ _ _ _ _ _ _ _ _.

1.6. The operator of copying and duplicating machines of the 1st category manages the work of _ _ _ _ _ _ _ _ _ _.

1.7. During the absence, the operator of copying and duplicating machines of the 1st category is replaced by a person appointed in accordance with the established procedure, who acquires the corresponding rights and is responsible for the proper performance of the duties assigned to him.

2. Description of work, tasks and duties

2.1. Performs copying of the original onto paper or a plate on copying and duplicating electrographic machines and machines of various systems and designs.

2.2. Sets the copy mode, enlarges copies, copies them from plates or films, checks the quality of copying.

2.3. Disassembles and aligns the printed sheets with the original, staples the set on a stitching machine.

2.4. Prepares equipment and materials for work, adjusts equipment during operation and cleans it.

2.5. Maintains the established documentation.

2.6. Performs copying works at a color copying supercomplex.

2.7. Knows, understands and applies the current regulatory documents concerning his activities.

2.8. Knows and fulfills the requirements of regulatory enactments on labor protection and the environment, complies with the norms, methods and techniques for the safe performance of work.

3. Rights

3.1. The operator of Category I copiers and duplicators has the right to take action to prevent and eliminate any irregularities or inconsistencies.

3.2. The operator of copying and duplicating machines of the 1st category has the right to receive all social guarantees provided by law.

3.3. The operator of copying and duplicating machines of the 1st category has the right to demand assistance in the execution of his job responsibilities and the exercise of rights.

3.4. The operator of copying and duplicating machines of the 1st category has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision of necessary equipment and inventory.

3.5. The operator of copying and duplicating machines of the 1st category has the right to get acquainted with the draft documents relating to his activities.

3.6. The operator of copying and duplicating machines of the 1st category has the right to request and receive documents, materials and information necessary for the performance of his official duties and orders of the management.

3.7. The operator of copying and duplicating machines of the 1st category has the right to improve his professional qualifications.

3.8. The operator of copying and duplicating machines of the 1st category has the right to report all violations and inconsistencies revealed in the course of its activities and make proposals for their elimination.

3.9. The operator of copying and duplicating machines of the 1st category has the right to familiarize himself with the documents defining the rights and obligations of the position held, the criteria for assessing the quality of the performance of official duties.

4. Responsibility

4.1. The operator of copying and duplicating machines of the 1st category is responsible for non-fulfillment or untimely fulfillment of the duties assigned by this job description and (or) non-use of the granted rights.

4.2. The operator of copying and duplicating machines of the 1st category is responsible for non-compliance with the rules of internal labor regulations, labor protection, safety, industrial sanitation and fire protection.

4.3. The operator of copying and duplicating machines of the 1st category is responsible for the disclosure of information about an organization (enterprise / institution) related to trade secrets.

4.4. The operator of copying and duplicating machines of the 1st category is responsible for non-fulfillment or improper fulfillment of the requirements of internal normative documents organizations (enterprises / institutions) and legal orders of the management.

4.5. The operator of copying and duplicating machines of the 1st category is responsible for offenses committed in the course of his activities, within the limits established by the current administrative, criminal and civil legislation.

4.6. The operator of copying and duplicating machines of the 1st category is responsible for causing material damage organization (enterprise / institution) within the limits established by the current administrative, criminal and civil legislation.

4.7. The operator of copying and duplicating machines of the 1st category is responsible for the misuse of the granted official powers, as well as their use for personal purposes.


Job description copier operator

1. General Provisions

1. This job description defines the functional duties, rights and responsibilities of the Copier and Duplicator Operator.
1.2. The operator of copying and duplicating machines is appointed and dismissed in accordance with the procedure established by the current labor legislation by order of the director of the enterprise.
1.3. The operator of copiers and duplicators reports directly to ____________________.
1.4. During the temporary absence of the Operator of copying and duplicating machines, his duties are assigned to ___________________________.

2nd category

Qualification requirements: Basic or incomplete basic general secondary education. Getting a profession directly in production. No work experience requirements.

The operator of copiers and duplicators should know:
- types of copying and duplicating electrographic machines, the principle of operation and rules for their operation;
- the rules for establishing the copying mode;
- device and rules of operation of collating and wire-sewing machines;
- rules for maintaining documentation.

Functional responsibilities:
1. Performs copying of the original on paper or a plate on copying and duplicating electrographic machines and machines of various systems and designs.
2. Enhances the copy mode, enlargement of copies, multiplies them from plates or films, checks the copy quality.
3. Disassembles and compares the printed letters with the original, staples the set on a wire sewing machine.
4. Prepares equipment and materials for work, adjusts the equipment during operation and cleans it.
5. Keeps established documentation

3rd rank
- in the case of copying works at a color copying supercomplex.

Qualification requirements: Complete or basic general secondary education. Vocational education without requirements for work experience or obtaining a profession directly in production, advanced training and work experience in a profession of the 2nd category - at least 1 year.

5. Rights
The operator of copying and duplicating machines has the right to:
5.1. Report to the management about all identified deficiencies within the limits of their competence.
5.2. Make suggestions for improving the work related to the responsibilities provided for in this job description.

6. Responsibility
The operator of copiers and duplicators is responsible for:
6.1. The quality and timeliness of the fulfillment of the duties assigned to him by this job description.
6.2. Compliance with the rules of the internal labor regulations of the enterprise.
6.3. Compliance with instructions on labor protection, fire safety and industrial sanitation.

7. Other conditions

This Job Description is communicated to the Copier and Duplicator Operator against receipt. One copy of the Instruction is kept in the employee's personal file.

Added to the site:

Explanatory note

for the preparation of workers for the 2nd category, as well as examination tickets.

The duration of training for new workers has been established for 5 months in accordance with the current List of professions for vocational training workers (Order of the Ministry of Education No. 3477 dated October 29, 2001).

Training can be carried out both by group and individual methods.

The qualification characteristic is compiled in accordance with the ETKS of work and the profession of workers 1998, issue 1.

Changes and additions can be made to the thematic plans of the studied subject, taking into account the specifics of the enterprise, within the hours established by the program.

Industrial training is carried out at the workplaces of the company's divisions.

The master (instructor) of industrial training must train workers in the effective safe organization of work, the use of new technology and advanced technologies in the workplace, consider in detail with them ways to increase labor productivity and measures to save materials and energy.

In the process of studying Special attention must be addressed to the need for a solid assimilation and fulfillment of all labor safety requirements. For these purposes, a theoretical teacher and a master (instructor) of industrial training, in addition to studying the general labor safety requirements that must be observed in each specific case, draws attention to the observance of safety rules when working on specific equipment.

By the end of the training, each student must be able to independently perform all the work provided for qualification characteristics, technical conditions and norms established at the enterprise.

Students are allowed to perform work independently only after passing the qualifying exam.

Qualification exams are held in accordance with STP 37.371.09012-03.

Updating the technical and technological base modern production requires the systematic inclusion of educational material on new technology and technology, saving materials, improving product quality, eliminating outdated educational material, terms and standards. Programs should also be supplemented with information on specific economics.

The number of hours allotted for the study of individual topics of the program, the sequence of their study, if necessary, may be changed, provided that the programs are completed in full in terms of content and the total number of hours.

Qualification characteristic.

Profession: machines.

Description of the work. Copying the original onto paper on copiers of various systems and designs. Setting the copy mode, enlarging copies, duplicating them from paper originals or transparencies, checking the quality of copying. Disassembly of copies, stapling of the kit with a stapler. Preparation of equipment and materials for work, regulation of equipment in the process of work and its cleaning. Maintaining the established documentation.

Should know: Types of copying and duplicating electrographic machines, the principle of operation and the rules of their operation; rules for establishing the copying mode; rules for maintaining documentation.

Syllabus

for vocational training of workers by profession

"Operator of copiers and duplicating machines."

The term of study is 5 months.

No. Courses. Items. Watch

______________________________________________________________

1 Theoretical teaching ............................................... ......................... 296

1.1 Economic course ............................................... .......................4

1.2 Course: Quality Management System (QMS) ............................ 4

1.3 General technical course ............................................... ..................thirty

1.3.1 Electrical Engineering .............................................. ................ten

1.3.2 Materials Science .............................................. ............eight

1.3.3 General information about technical mechanics ..................... 6

1.3.4 General requirements labor protection: .................................. 6

1.4 Special course ............................................... .................... 258

1.4.1 Equipment and technology of work performance ........ 252

1.4.2 Labor protection requirements during work ............... 4

1.4.3 .............................................2

2 Practical training ............................................... ............................. 494

3 Consultation ................................................ .............................................12

4 Reserve of study time .............................................. ...........................twenty

5 Qualification Exam ............................................... ........................eight

TOTAL: ... ...... 830

Note: when training a worker in a related (second) profession, it is allowed to train only in the subject "Special course" with "Practical training" and with the addition of certain topics for theoretical training, in which the worker was not trained in the main profession.

Theoretical teaching

1.1 Economic course

Thematic plan and program of the economic course

Thematic plan

No. Theme Clock

______

1 Main articles of labor legislation ............................................ ............. 1

2 Labor rationing. Progressive forms of organization

and stimulation of labor ............................................... ............................................ 1.5

Economic course program

Topic 1. The main articles of labor legislation.

General Provisions. Collective agreement, labor contract, work time, rest time, guarantees and compensation, labor discipline.

Topic 2. Labor rationing.

Progressive forms of organization and stimulation of labor. Labor rationing (basic concepts and provisions). Elimination of losses of working time, certification of workplaces, their rationalization, expansion of service areas and combination of professions.

Forms of remuneration, material and moral incentives.

The principles of organizing production teams, the main directions of their improvement. Brigade and individual forms of labor organization at the plant. Regulations on the production team, team council. Organization planning production activities self-supporting brigades, KTU.

Main directions scientific organization labor.

Labor discipline and its role in the organization of labor processes.

Topic 3. Economic categories, criteria, indicators.

Increasing production efficiency is the main direction of the enterprise. Labor productivity as main indicator production efficiency.

Fixed and circulating assets of the enterprise, return on assets.

The cost of production, as a synthetic generalizing indicator that characterizes all aspects of the enterprise.

Increasing profits is the ultimate goal of reducing production costs. The profitability of the company's products.

Price concept. The correct price level, as an opportunity to recover expenses and make a certain profit.

The essence of the concept of "inflation".

Joint-stock company, share and share price, governing bodies joint stock company, dividends.

Brief analysis economic activity enterprises.

1.2 Course: Quality Management System (QMS)

1.2.1 Thematic plan and program of the course "Quality Management System" (QMS)

Thematic plan

No. Theme Clock

_______________________________________________________________

1 International systems quality. History of origin,

targets and goals............................................... .................................................. 0.5

2 Requirements for the quality management system specified

GOST R ISO 9001-2001 ............................................ ..................................... 0.5

3 Process approach - the basis of the QMS ............................................ ................ 0.5

4 Principles of quality management .............................................. .............. 0.5

5 Mandatory documented QMS procedures .................................. 0.5

6 Quality manual .............................................. ............................. 0.5

7 Quality policy and administration obligations ............. 0.5

8 Certified QMS -

continuous improvement, development perspective ............................................ 0 ,5

TOTAL: …… .4

1.3 General technical course

1.3.1 The subject program "Electrical Engineering"

The use of electricity in production and at home. Electric current concept. Thermal effect of the current. Short circuit and protection measures. Electrical devices used in work. Classification of electrical devices and rooms according to the degree of electrical safety and safe voltage.

1.3.2 The program of the subject "Materials Science".

Ferrous and non-ferrous metals. Materials from wood, flax, hemp, jute. Types of paper, copy paper, transparencies, self-adhesive films. Storage of paper. Toners, developers (media). Synthetic materials... Rezino -technical materials and products. Fuels and lubricants. Aggressive and poisonous substances, liquids, gases.

1.3.3. General information about technical mechanics

Basic laws of dynamics. The force of inertia. The concept of the impact of rigid bodies. Gear, worm and chain drives, their design and applications. The principle of operation of friction and belt drives.

1.3.4. General labor protection requirements

Electrical safety, fire safety, occupational health, industrial sanitation, injury prevention, first aid.

Training on this topic is carried out in accordance with the training program for workers "", "First aid".

1.4. Special course

1.4.1. Equipment and work technology

Thematic plan

No. Theme Clock

_______________________________________________________________

1. Introductory lesson .............................................. ............................................. 2

2. Scopes of copiers ...................................... 2

3. Basic information about production and organization of the workplace ....... 4

4. a brief description of types of copying-plural. production ......... 4

5. The principle of operation of photocopiers and electrocopy machines ... 232

6. Procedure for conducting work ............................................. ....................................eight

Topic 1. Introductory lesson

What is copying for?

Familiarization with the purpose and objectives of training, with the requirements for operators of copying and duplicating equipment, organization educational process, qualification characteristics. The procedure for performing trial work and conducting a qualifying exam.

Topic 2. Scopes of copiers

Copying the original onto paper, enlarging copies, reproducing them from paper originals and transparencies.

Topic 3. Basic information about the production and organization of the worker

The composition of the subdivisions of the plant.

Safe organization of the operator's workplace for copying and duplicating machines. Inspection before starting work of the workplace: sufficient lighting, availability of fire extinguishing equipment, absence of foreign objects that may interfere with work. Occupational safety requirements when working on specific equipment.

Topic 4. Brief characteristics of the types of copying and multiplying

Production

Blueprint. Purpose, tasks to be solved and scope.

Electrostatic copying. Purpose, tasks to be solved and scope.

Copying by means computing technology... Solved tasks and scope.

Reproduction of typographic material on rotoprinters.

Topic 5. Principles of work of photocopiers

and electrocopy machines

Physical foundations of blueprint. The principle of work of photocopiers. Properties of light-sensitive materials and applied chemical reagents... The process of obtaining a blueprint. The device of photocopiers.

Physical basis for making photocopies. The principle of operation of electrocopy machines, their structure. The device of the optical path for transferring the image from the original to the photosensitive drum. Materials used for drum coatings. Methods for applying toner to the drum after exposure. Transferring the image to paper and reloading the drum surface. Fixing the image to paper. Automatic paper feeders, their types and paper requirements for these devices.

Changing the scale of the image of the document, methods and tools that allow you to change the contrast and exposure of the image.

Topic 6 Work order

Obligations of the service personnel

Checking by external inspection the serviceability of copying and duplicating machines, the absence of bare ends of the wiring, the presence and reliability of grounding connections. Requirements before turning on KMA.

Preparation of equipment, switching on KMA, its preliminary adjustment, trial check of work.

Preparation of materials for work, obtaining copies of images and documents, adjusting equipment during operation, setting a mode during operation, establishing copies, duplicating, checking the quality of copying. Disassembly of copies, stapling of sets of documents, equipment cleaning.

1.4.2 Labor protection requirements during work

Thematic plan

No. Theme Clock

_________________________________________________________________

1. Dangerous and harmful production factors acting on

workers ................................................. .................................................. ........ 0.5

2. Hygiene requirements to production facilities.

Hygienic requirements for the microclimate, for the organization of lighting

industrial premises and workplaces, heating requirements,

ventilation and air environment ............................................. ....... 1.5

3. Hygienic requirements for technological equipment.

Requirements for limiting the harmful effects of noise and vibration.

Hygienic requirements for limiting harmful effects

ultraviolet and laser radiation, tension

electrostatic field …………………… ........................................ ............. 1.5

4. Medical and preventive maintenance of workers and carrying out

medical examinations ................................................ ...................................... 0.5

Program

1. The main causes of injury when working on copiers and duplicating machines... Rules for the safe operation of duplicating machines (KMA). Familiarization with safe methods and techniques for performing work, with passport characteristics, hazardous areas of equipment, safety signs and grounding KMA.

2. Dangerous and harmful production factors at the workplace of the operator of copying and duplicating machines: the level of illumination, microclimate parameters (heating, ventilation, air environment) in production premises and in the workplace, personal protective equipment.

3. Requirements for KMA: limiting the level of noise and vibration, static electricity, voltage level in the electrical network, the release of chemicals during the operation of KMA (ozone, nitrogen oxide, toner), (soot contained in the toner has carcinogenic properties; nitrogen oxide has impact on the nervous system, etc.), requirements for limiting exposure to harmful ultraviolet and laser radiation, for elevated temperatures of some parts of the KMA.

4. Medical examinations operators of copying and duplicating machines, medical and preventive maintenance, admission to work, personal hygiene rules.

1.4.3. Environmental protection.

Environmental rights and obligations of Russian citizens.

Administrative and legal responsibility of production managers and citizens for violations in the field of rational use of natural resources and environmental protection.

Sources and types of environmental pollution. Creation of a normal ecological state of the environment.

Personal opportunities and responsibilities of workers in this profession in the field of environmental protection.

Requirements ensuring the protection of atmospheric air from pollutants by ventilation units.

Standards for maximum permissible concentrations (MPC) of pollutants in the air.

Measures to reduce the dust content of the discharged air.

The procedure for the collection of production waste.

PRACTICAL TRAINING

2.1. Thematic plan and program of industrial training.

Thematic plan.

Introductory lesson

Labor protection requirements during work

Characteristics of the types of copying. Appointment, scope.

The principle of operation of photocopiers and electrocopy machines: familiarization with the control system, device.

Preparation of copiers and duplicators for work.

Consumption rates of materials required for the operation of KMA.

The procedure for working at a regular place

Maintenance of accompanying documentation

Qualifying exam

PROGRAM

Topic 1. Introductory lesson.

Familiarization with the workplace. Relationship with other departments, internal labor regulations, working conditions of the operator of copying and duplicating machines, forms of work organization, work and rest schedule.

Safety instructions and fire safety... Training in the use of personal protective equipment and fire-fighting equipment, familiarization with the Rules of conduct during a fire and provision. First aid.

Topic 2. Labor protection requirements during work.

Topic 3 - Topic 4. Industrial training.

Topic 5. Preparation of copiers and duplicators for work.

General characteristics of the apparatus. Appointment. Principle of operation. Requirements for toner and paper. Requirements for the premises and electrical network. The device and operation of the copier: preparation for work, the location of the components, the purpose of buttons and indications, copying. Daily service. Determination of the total number of copies. Possible malfunctions and methods of their elimination: diagnostics of malfunctions, removal of paper jams.

Topic 6. Rates of consumption of materials required

when operating KMA.

Changeable norms. Types and types of papers, toners. Dimensions, GOSTs, requirements for them. Determination of the total number of copies.

Topic 7. Procedure for working at a regular place.

Requirements before turning on KMA. Start KMA. Seal. Trial original. Stop. Making copies. Checking if the copies match the original. Execution of works stipulated by the qualification characteristic, in accordance with technical requirements... Mastering production standards while maintaining quality indicators.

All work is carried out by the student independently under the supervision of an industrial training instructor.

Topic 8. Maintenance of accompanying documentation.

Acceptance and registration of copied documents in the log book, their issuance. Correctness of logging.

Application

Examination tickets to test knowledge of the profession "Operator of copiers and duplicating machines"

TICKET number 1.

copier and multiplier operator

What is accreditation?

What types of paper do you use in your work?

What is the difference between blueprint and electrocopy machines?

How is the image formed on the drum of an electric copier?

Hazardous properties of waste.

Who is allowed to work on duplicating machines (KMA).

What is an insurance policy?

TICKET # 2.

copier and multiplier operator

1. Certification of the quality management system (basic concepts).

2. What is electric current?

3. What is used as an emitter in a photocopier?

4.What is exposure?

5. Classification of hazardous waste to hazard classes for the environment.

6. What are dangerous and harmful factors are present at the workplace of the KMA operator?

7. What is the profitability of an enterprise, profitability of products?

TICKET No. 3.

copier and multiplier operator

1. The system of five zeros of the Japanese model of quality management.

2. Copy paper. Its storage.

3. What is a DEVELOPER? Toner properties

5. Environmental damage during waste management.

6. What instructions on labor protection does the operator of copying and duplicating machines go through, how often?

7. What is productivity and labor productivity?

TICKET No. 4.

copier and multiplier operator

1. Define the terms: product identification and traceability.

2. What synthetic materials do you know?

3. How is a latent image formed on the drum of an electric copier?

5. General requirements for handling hazardous waste.

6. Labor protection requirements before starting work.

7. What is profit?

TICKET No. 5.

copier and multiplier operator

1. Who in the quality management system is responsible for the performance of work affecting quality?

2. Thermal effect of the current.

4. How is the image transferred from the original to the photosensitive drum?

5. Basic principles of state policy in the field of production and consumption waste management.

6. Labor protection requirements during work.

7. What is a technological map?

TICKET No. 6.

copier and multiplier operator

1. What sets the quality manual?

2. Toners, their purpose and application.

3. What is a developing agent for a blueprint?

4. The procedure for preparing an electrocopy machine for work.

5. Control over activities and responsibility in the field of environmental protection.

6. Requirements of labor protection in emergency situations.

7. What are fixed assets, funds?

TICKET # 7.

copier and multiplier operator

1. Basic documents of the quality management system.

3. What are the possibilities of duplicating documents using a computer?

4. What is a cartridge?

5. The main federal legislation in the field of waste management.

6. Requirements of labor protection at the end of work.

7. What is working capital?

TICKET number 8.

copier and multiplier operator

1. The main requirements for the quality management system,
developed on the basis of GOST R ISO 9001-2001.

2. What is ozone and how does it differ from oxygen?

4. Computer programs that allow you to edit the document.

5. Danger of waste for the environment (ecotoxicity).

6. Labor protection of adolescents and youth.

7. What is a closed joint stock company?

TICKET number 9

copier and multiplier operator

1. What sections does GOST R ISO 9001-2001 include?

2. Synthetic materials used in mechanical engineering.

3. By what means can you get copies of documents made on paper ?; tracing paper ?; film?

4. Materials used for coating photosensitive drums, their advantages and disadvantages.

5. Environmental rights and obligations of Russian citizens.

6. Labor protection of women.

7. What is an employment contract?

TICKET number 10

copier and duplicator operator

1. The main differences between the quality management system (QMS) of international standards from the earlier existing quality system (QMS).

2. Rubber materials and products used in mechanical engineering.

3. Organization of the operator's workplace for duplicating equipment.

4. How to increase the contrast of a copy from a poorly designed primary document?

5. Administrative and legal responsibility of citizens for violations in the field of rational use of natural resources and environmental protection.

6. How carbon dioxide fire extinguishers work and are arranged.

7. What is a collective agreement?

TICKET number 11

copier and multiplier operator

2. What is a "short circuit"? protection measures.

3. The device of photocopiers.

4. How is the image transferred from the copier drum to the paper?

5. Sources and types of environmental pollution.

6. Chemical fire extinguishers and rules for their use.

7. What is a dividend?

TICKET number 12

copier and multiplier operator

1. What document establishes the requirements for the quality management system?

2. What non-ferrous and ferrous metals do you know?

3. Properties of photosensitive materials and chemicals used for photocopying.

4. The device of a color electrocopier.

5. Personal opportunities and responsibility of workers of this profession in the matter of environmental protection.

6. What must be grounded on the equipment, what are the requirements for it, how often is the grounding checked, by whom?

7. What is inflation, hyperinflation?

TICKET number 13

copier and multiplier operator

2. Requirements for photocopying paper.

4. Light sources for photocopiers.

5. Requirements ensuring the protection of atmospheric air from pollutants by ventilation units.

6. Means of protection against electric shock, causes of injury.

7. What is a joint stock company?

TICKET number 14

copier and multiplier operator

2. Materials used for the production of duplicating equipment.

3. What is rotoprint and what is it used for?

4. What is drum recharge? At what stage is it produced and why?

5. Standards for maximum permissible concentrations (MPC) of pollutants in the air.

6. Methods of artificial respiration, chest compressions.

7. What is a stock, stock price?

TICKET number 15.

copier and multiplier operator

1. What is the quality management system focused on in the first place?

2. Scope of copying technology.

3. The principle behind obtaining a blueprint.

4. Methods for applying toner to the drum after exposure.

5. The procedure for the collection of production waste.

6. Rules of conduct on the territory of the plant, in the shop. Where are these requirements reflected?

7. What is automation, production automation, control automation?

TICKET No. 16.

copier and multiplier operator

1. Give a definition of the term "Quality Management System" (QMS).

2. Preparation of the workplace for work.

3. The principle behind obtaining a blueprint.

4. How the image is formed on the drum of an electric copier

5. Environment and public health.

6. Legislative requirements for occupational safety training.

7. What is production efficiency?

TICKET number 17.

copier and multiplier operator

1. Give a definition of the term "quality".

2. Aggressive and poisonous substances, liquids, gases.

3. What is "contact" printing method?

4. Automatic paper feeder

5. Water resources: rational use and composition.

6. Obligations of the employee in the field of labor protection.

7.What is Saving Mode?

TICKET number 18.

copier and multiplier operator

1. Who is a manager?

2. Gear, worm, chain and belt drives. Application area.

3. Methods for applying toner to the drum after exposure.

4. What is image contrast?

5. Sources of air pollution.

6. Means of extinguishing fires when electrical installations are ignited.

7. What is a production culture?

TICKET number 19.

copier and multiplier operator

1. What is management?

2. In what cases is the original document computer processed before copying?

3. What is exposure?

4. What is the difference between photocopiers and electrocopy machines?

5. Legislation in the field of environmental protection.

6. Give a definition of the concepts: harmful and dangerous production factor, safe working conditions.

7. What is a wage fund?

TICKET number 20

copier and multiplier operator

1. What is the quality management system focused on in the first place?

2. What is static electricity?

3. What is "contact" printing method?

4. The principle behind obtaining an electrostatic copy?

5. Protection of subsoil and soil.

6. Responsibility for violation of legislation and other regulations on labor protection.

7. What is the production cost?

Literature

« Economic theory"Ed. A.I. Dobrynin. Publishing house "Peter" 2002

"Theoretical electrical engineering" ed. V.S. Popov "Energoatomizdat" 1990

"Materials Science" ed. Yu.A. Geller. M. "Metallurgy" 1989

Instruction No. 37.371.55373 on labor protection.

Operation manual for copiers and duplicators from the manufacturer or supplier

 

It might be useful to read: