Master carpentry. What is interesting about the profession of a master of carpentry and parquet work. IV. Requirements for the conditions for the implementation of the educational program

Approved

by order of the Ministry of Education

FEDERAL STATE EDUCATIONAL STANDARD

SECONDARY VOCATIONAL EDUCATION BY PROFESSION

08.01.24 MASTER OF JOINERY AND CARPENTRY, PARQUET

AND GLASS WORKS

I. GENERAL PROVISIONS

1.1. This federal state educational standard of secondary vocational education(hereinafter - FSES SVE) is a set of mandatory requirements for secondary vocational education (hereinafter - SVE) by profession 08.01.24 Master of joinery, carpentry, parquet and glass work (hereinafter - profession).

1.2. Obtaining SVE by profession is allowed only in a professional educational organization or an educational organization higher education(further together - educational organization).

1.3. When developing a training program for skilled workers, employees (hereinafter referred to as the educational program), an educational organization forms requirements for the results of its development in terms of professional competencies based on professional standards, a list of which is presented in Appendix No. 1 to this Federal State Educational Standard.

1.5. Region professional activity, in which graduates who have mastered the educational program can carry out professional activities: 16 Construction, housing and communal services.

1.6. Education according to the educational program in an educational organization is carried out in full-time and part-time forms of education.

1.7. When implementing educational program an educational organization has the right to use e-learning and distance learning technologies.

When teaching disabled people and persons with disabilities, e-learning and distance learning technologies should provide for the possibility of receiving and transmitting information in forms accessible to them.

1.8. The implementation of the educational program is carried out by the educational organization both independently and through a network form.

1.9. The implementation of the educational program is carried out in the state language of the Russian Federation, unless otherwise specified by the local normative act educational organization.

The implementation of the educational program by an educational organization located on the territory of the republic of the Russian Federation may be carried out in the state language of the republic of the Russian Federation in accordance with the legislation of the republics of the Russian Federation. The implementation of the educational program in the state language of the Republic of the Russian Federation should not be carried out to the detriment of the state language of the Russian Federation.

1.10. The term for obtaining education in an educational program in full-time education, regardless of the applicable educational technologies, is:

on the basis of basic general education - 2 years 10 months;

10 months.

The term for obtaining education under the educational program in part-time education, regardless of the educational technologies used, increases in comparison with the period for obtaining education in full-time education:

no more than 1.5 years when receiving education on the basis of basic general education;

for no more than 1 year when receiving education on the basis of secondary general education.

When studying according to an individual curriculum, the period for obtaining education in an educational program, regardless of the form of education, is no more than the period for obtaining education established for the corresponding form of education. When studying according to an individual curriculum for students with disabilities and persons with disabilities, the period of education may be increased by no more than 1 year compared to the period of education for the corresponding form of education.

The specific term for obtaining education and the volume of the educational program implemented in one academic year, in part-time and part-time education, as well as according to an individual curriculum, are determined by the educational organization independently within the time limits established by this paragraph.

1.11. An educational program implemented on the basis of basic general education is developed by an educational organization based on the requirements of the federal state educational standard of secondary general education and the Federal State Educational Standard of Higher Education, taking into account the profession being acquired.

1.12. An educational organization develops an educational program based on the following combination of qualifications for a skilled worker, employee, specified in the List of professions of secondary vocational education, approved by order of the Ministry of Education and Science of the Russian Federation of October 29, 2013 N 1199 (registered by the Ministry of Justice of the Russian Federation on December 26, 2013 , registration N 30861), as amended by orders of the Ministry of Education and Science of the Russian Federation dated May 14, 2014 N 518 (registered by the Ministry of Justice of the Russian Federation on May 28, 2014, registration N 32461), dated November 18, 2015 N 1350 (registered by the Ministry of Justice of the Russian Federation on December 3, 2015, registration N 39955) and dated November 25, 2016 N 1477 (registered by the Ministry of Justice of the Russian Federation on December 12, 2016, registration N 44662):

II. REQUIREMENTS FOR THE STRUCTURE OF THE EDUCATIONAL PROGRAM

2.1. The structure of the educational program includes a mandatory part and a part formed by participants in educational relations (variable part).

The obligatory part of the educational program is aimed at the formation of general and professional competencies, provided for in Chapter III of this Federal State Educational Standard, and should not exceed 80 percent of the total amount of time allotted for its development.

The variable part of the educational program (at least 20 percent) makes it possible to expand the main (s) type (s) of activity, for which a graduate who has mastered the educational program should be ready, according to the combination of the qualifications obtained specified in paragraph 1.12 of this FSES SVE (hereinafter referred to as the main activities), as well as obtaining additional competencies necessary to ensure the competitiveness of the graduate in accordance with the demands of the regional labor market.

The specific ratio of the volumes of the mandatory part and the variable part of the educational program is determined by the educational organization independently in accordance with the requirements of this paragraph, as well as taking into account the exemplary main educational program (hereinafter referred to as the POEP).

2.2. The educational program has the following structure:

general professional cycle;

professional cycle;

state final certification, which ends with the assignment of the qualifications of a skilled worker, employee, specified in clause 1.12 of this FSES SPO.

Table N 1

Structure and scope of the educational program

The structure of the educational program	The volume of the educational program in academic hours
General professional cycle	at least 180
Professional cycle	at least 972
State final certification:
on the basis of secondary general education
on the basis of basic general education
The total volume of the educational program:
on the basis of secondary general education
on the basis of basic general education, including obtaining secondary general education in accordance with the requirements of the federal state educational standard of secondary general education

2.3. The list, content, volume and procedure for the implementation of disciplines and modules of the educational program is determined by the educational organization independently, taking into account the PEP for the relevant profession.

To determine the volume of an educational program, an educational organization can apply a system of credits, with one credit unit corresponding to 32 - 36 academic hours.

2.4. In general professional and professional cycles (hereinafter - study cycles) the volume of work of students in interaction with the teacher is allocated by types of training sessions (lesson, practical lesson, laboratory lesson, consultation, lecture, seminar), practice (in a professional cycle) and independent work of students.

At least 80 percent of the volume of study cycles of the educational program provided for in Table N 1 of this Federal State Educational Standard of SVE should be allocated for conducting training sessions and practices when mastering the study cycles of the educational program in full-time education, at least 25 percent in part-time education.

The training cycles include intermediate certification of students, which is carried out as part of the development of these cycles in accordance with the funds of assessment tools developed by the educational organization, which allow assessing the achievements of the learning outcomes planned for individual disciplines, modules and practices.

2.5. Mastering the general professional cycle of the educational program in full-time education should include mastering the discipline "Physical Culture" in the amount of at least 40 academic hours and the discipline "Life Safety" in the amount of 36 academic hours, of which 70 percent for mastering the basics of military service (for boys) of the total amount of time allotted for the specified discipline.

The educational program for subgroups of girls may provide for the use of 70 percent of the total time of the discipline "Life Safety", provided for studying the basics of military service, for mastering the basics of medical knowledge.

For students with disabilities and persons with disabilities, the educational organization establishes a special procedure for mastering the discipline "Physical Culture", taking into account their state of health.

2.6. When forming an educational program, an educational organization should provide for the inclusion of adaptive disciplines that ensure the correction of developmental disorders and social adaptation students with disabilities and persons with disabilities.

2.7. The professional cycle of the educational program includes professional modules that are formed in accordance with the main activities provided for by this Federal State Educational Standard.

The professional cycle of the educational program includes the following types of practices: educational practice and industrial practice.

Educational and industrial practices are carried out when students master professional competencies within the framework of professional modules and are implemented both in several periods and dispersed, alternating with theoretical classes within the framework of professional modules.

The part of the professional cycle of the educational program allocated for conducting internships is determined by the educational organization in the amount of at least 25 percent of the professional cycle of the educational program.

2.8. State final certification is carried out in the form of graduation defense qualifying work in the form of a demonstration exam.

The educational organization determines the requirements for the content, volume and structure of the final qualifying work independently, taking into account the POOP.

III. REQUIREMENTS FOR DEVELOPMENT RESULTS

EDUCATIONAL PROGRAM

3.1. As a result of mastering the educational program, the graduate should form general and professional competencies.

3.2. A graduate who has mastered the educational program must have the following general competencies (hereinafter - OK):

OK 01. Choose ways to solve problems of professional activity, in relation to different contexts.

OK 02. Search, analyze and interpret the information necessary to perform the tasks of professional activity.

OK 03. Plan and implement your own professional and personal development.

OK 04. Work in a team and team, interact effectively with colleagues, management, clients.

OK 05. To carry out oral and written communication in the state language, taking into account the peculiarities of the social and cultural context.

OK 06. Show a civil-patriotic position, demonstrate conscious behavior based on traditional universal values.

OK 07. Promote conservation environment, resource saving, to act effectively in emergency situations.

OK 08. Use the means of physical culture to maintain and improve health in the process of professional activity and maintain the required level of physical fitness.

OK 09. Use Information Technology in professional activities.

OK 10. Use professional documentation in the state and foreign languages.

OK 11. Plan entrepreneurial activity in the professional field.

3.3. A graduate who has mastered the educational program must be ready to perform the main activities provided for by this FSES SPO, based on a combination of qualifications of a skilled worker serving in accordance with paragraph 1.12 of this FSES SPO.

Table No. 2

Correlation of main activities and qualifications

skilled worker serving in the formation

educational program

Main activities	Name of qualifications of a skilled worker, employee
Carpentry work	joiner, construction carpenter, parquet worker; joiner construction carpenter glazier
Performing carpentry work	joiner, construction carpenter, parquet worker; joiner construction carpenter glazier
Execution of glass works	joiner construction carpenter glazier
Carrying out work on the installation of parquet floors	joiner construction carpenter flooring

3.4. A graduate who has mastered the educational program must have professional competencies(hereinafter - PC), corresponding to the main activities:

3.4.1. Carpentry work:

PC 1.1. Organize the workplace in accordance with the requirements of labor protection and safety.

PC 1.2. Carry out preparatory work.

PC 1.3. Produce simple joinery rods and joinery blanks.

PC 1.4. To make joinery products of varying complexity from the provided terms of reference material, in accordance with the established consumption rate, drawing and quality requirements.

PC 1.5. Prepare joinery surfaces for finishing in accordance with the requirements for appearance products.

PC 1.6. Carry out installation of joinery in accordance with the design situation.

PC 1.7. Perform carpentry repairs.

3.4.2. Performing carpentry work:

PC 2.1. Organize the workplace in accordance with the requirements of labor protection and safety.

PC 2.2. Carry out preparatory work.

PC 2.3. To carry out the preparation of wooden elements for various purposes in accordance with the drawing, the established material consumption rate and quality requirements.

PC 2.4. Perform assembly and installation work in accordance with the design documentation.

PC 2.5. Carry out work on the arrangement of scaffolding, scaffolding, formwork in accordance with the design regulations and the requirements of safe labor organization.

PC 2.6. Perform carpentry repairs.

3.4.3. Execution of glass works:

PC 3.1. Organize the workplace in accordance with the requirements of labor protection and safety.

PC 3.2. Carry out preparatory work.

PC 3.3. Perform glazing of bindings with all types of glass and double-glazed windows in accordance with the terms of reference.

PC 3.4. Arrange partitions made of glass blocks and glass profiles in accordance with the design situation.

3.4.4. Carrying out work on the installation of parquet floors:

PC 4.1. Organize the workplace in accordance with the requirements of labor protection and safety.

PC 4.2. Carry out preparatory work.

PC 4.3. Arrange floors from boards and industrial wood-based materials in accordance with the technical documentation.

PC 4.4. Arrange parquet floors from panel and piece parquet in accordance with the technical documentation.

3.5. The minimum requirements for the results of mastering the main activities of the educational program are presented in Appendix No. 2 to this Federal State Educational Standard.

3.6. An educational organization independently plans learning outcomes for individual disciplines, modules and practices, which must be correlated with the required results of mastering the educational program (graduates' competencies). The set of planned learning outcomes should ensure that the graduate masters all the OK and PC in accordance with the selected combination of qualifications for a skilled worker, employee, established by this Federal State Educational Standard.

IV. REQUIREMENTS FOR IMPLEMENTATION CONDITIONS

EDUCATIONAL PROGRAM

4.1. Requirements for the conditions for the implementation of the educational program include general system requirements, requirements for material and technical, educational and methodological support, personnel and financial conditions for the implementation of the educational program.

4.2. General system requirements for the conditions for the implementation of the educational program.

4.2.1. The educational organization must have on the right of ownership or otherwise legal basis material and technical base, providing all types of learning activities students provided curriculum, taking into account the POOP.

4.2.2. In the case of the implementation of an educational program using the network form, the requirements for the implementation of the educational program must be provided by a set of resources for material, technical and educational support provided by educational organizations participating in the implementation of the educational program using the network form.

4.2.3. In the case of the implementation of the educational program at the departments or other departments created by the educational organization in accordance with the established procedure in other organizations structural divisions the requirements for the implementation of the educational program must be provided by a combination of resources of these organizations.

4.3. Requirements for the material, technical and educational and methodological support for the implementation of the educational program.

4.3.1. Special premises should be classrooms for conducting all types of classes provided for by the educational program, including group and individual consultations, current control and intermediate certification, as well as rooms for independent work, workshops and laboratories equipped with equipment, technical means training and materials that take into account the requirements of international standards.

4.3.2. Premises for independent work of students should be equipped computer technology with the ability to connect to the information and telecommunication network "Internet" and provide access to the electronic information and educational environment of the educational organization (if any).

In the case of the use of e-learning, distance learning technologies, it is allowed to use specially equipped rooms, their virtual counterparts, allowing students to master OK and PC.

4.3.3. An educational organization must be provided with the necessary set of licensed software.

4.3.4. The library fund of an educational organization must be completed with printed publications and (or) electronic publications for each discipline of the general professional cycle and for each professional module of the professional cycle at the rate of one printed publication and (or) electronic publication for each discipline, module per student. The library fund should be completed with printed editions and (or) electronic editions of basic and additional educational literature published over the past 5 years.

The educational organization uses textbooks as the main literature, study guides provided by the POOP.

If there is an electronic information and educational environment, it is allowed to replace the printed library fund granting the right of simultaneous access to at least 25% of students to the electronic library system (electronic library).

4.3.5. Students with disabilities and persons with disabilities should be provided with printed and (or) electronic educational resources adapted to their health limitations.

4.3.6. The educational program should be provided with educational and methodological documentation for all academic subjects, disciplines, modules.

4.4. Requirements to personnel conditions implementation of the educational program.

4.4.1. The implementation of the educational program is provided by the teaching staff of the educational organization, as well as persons involved in the implementation of the educational program on the terms of a civil law contract, including from among the heads and employees of organizations whose activities correspond to the field of professional activity specified in paragraph 1.5 of this Federal State Educational Standard (having at least 3 years of work experience in this professional field).

4.4.2. Qualification teaching staff educational organization must meet qualification requirements specified in qualification guides, and (or) professional standards (if any).

Pedagogical workers involved in the implementation of the educational program should receive additional professional education in advanced training programs, including in the form of internships in organizations whose activities correspond to the field of professional activity specified in clause 1.5 of this Federal State Educational Standard, at least once every 3 years taking into account the expansion of the range of professional competencies.

The share of teaching staff (in terms of rates reduced to integer values) that ensure the development of professional modules by students who have at least 3 years of experience in organizations whose activities correspond to the field of professional activity specified in clause 1.5 of this Federal State Educational Standard, in the total number of teaching staff, implementing an educational program should be at least 25 percent.

4.5. Requirements for the financial conditions for the implementation of the educational program.

4.5.1. Financial support for the implementation of the educational program should be carried out in an amount not lower than the basic standard costs for the provision public service on the implementation of state-accredited educational programs of secondary vocational education in the profession, taking into account the corrective coefficients.

4.6. Requirements for the applied mechanisms for assessing the quality of the educational program.

4.6.1. The quality of the educational program is determined within the framework of the internal evaluation system, as well as the external evaluation system on a voluntary basis.

4.6.2. In order to improve the educational program, an educational organization, when conducting a regular internal assessment of the quality of the educational program, involves employers and their associations, other legal and (or) individuals, including teaching staff of an educational organization.

4.6.3. An external assessment of the quality of an educational program can be carried out when employers, their associations, as well as organizations authorized by them, including foreign organizations, or professional and public organizations that are part of international structures, carry out professional and public accreditation in order to recognize the quality and level of training of graduates, who have mastered the educational program that meets the requirements of professional standards, the requirements of the labor market for specialists of the relevant profile.

Appendix No. 1

Master carpentry,

parquet and glass works

SCROLL

PROFESSIONAL STANDARDS RELATED

PROFESSIONAL ACTIVITIES OF EDUCATIONAL GRADUATES

SECONDARY PROFESSIONAL EDUCATION PROGRAMS

BY PROFESSION 08.01.24 MASTER OF JOINERY AND CARPENTRY,

PARQUET AND GLASS WORKS

Occupational Standard Code	Name of professional standard
	Professional standard "Parquet", approved by the order of the Ministry of Labor and social protection Russian Federation of December 22, 2014 N 1092n (registered by the Ministry of Justice of the Russian Federation on January 23, 2015, registration N 35666), as amended by order of the Ministry of Labor and Social Protection of the Russian Federation of October 28, 2015 N 793n (registered by the Ministry of Justice of the Russian Federation December 3, 2015, registration N 39947)
	Professional standard "Glazier", approved by order of the Ministry of Labor and Social Protection of the Russian Federation of December 22, 2014 N 1062n (registered by the Ministry of Justice of the Russian Federation on January 26, 2015, registration N 35716), as amended by order of the Ministry of Labor and Social Protection of the Russian Federation dated October 28, 2015 N 793н (registered by the Ministry of Justice of the Russian Federation on December 3, 2015, registration N 39947)

Appendix No. 2

to GEF SPO by profession 08.01.24

Master carpentry,

parquet and glass works

MINIMUM REQUIREMENTS

TO THE RESULTS OF THE DEVELOPMENT OF THE MAIN ACTIVITIES

EDUCATIONAL PROGRAM OF SECONDARY PROFESSIONAL

EDUCATION BY PROFESSION 08.01.24 MASTER

JOINERY AND CARPENTRY, PARQUET

AND GLASS WORKS

Main activity

Requirements for knowledge, skills, practical experience

Carpentry work

rules for reading working drawings;

breeds and variety-forming defects of wood;

physical, mechanical and technological properties of wood;

arrangement of tools, electrical machines and woodworking machines;

rules for handling electrified tools;

the procedure for preparing tools for work;

requirements for the accuracy of manufacturing joinery products;

requirements for the quality of processing joinery parts and products;

technology for the manufacture of joinery and parts;

technology for performing carpentry and assembly and repair carpentry work;

types of technical documentation for the production of works;

On the Yudu website, you will quickly find qualified craftsmen who will offer the best prices for carpentry work in Moscow and the Moscow region. The carpenter will perform inexpensively quality repair doors and windows, restore furniture and repair wooden interior elements. At Yuda, you can also profitably order the services of a carpenter for the manufacture of furniture and finishing work.

How does a qualified contractor work?

If you are looking for an experienced carpenter who can do all kinds of complex repairs at a low cost wooden products in an apartment or cottage, contact Yudu's performers. A private master will come to your home at the specified address in Moscow and inexpensively fix a breakdown of any complexity. The cost of the service, as well as the time of the visit, you can agree with the specialist individually.

Yuda has a price list with approximate prices for different kinds works. Their exact cost will be announced to you by specialists after assessing the scope of the task. For carpentry work on wood, Yudu performers have a professional tool. Carpenters registered on the site will repair:

wooden window sills, windows, interior and entrance doors replacement of locks and fittings
floor covering with installation of parquet or laminate boards
stairs, railings, thresholds, skirting boards, platbands
furniture sections and their elements

To find out how much they cost repair work, you should look at the prices located in the profiles of the performers. There you can find the cost of facing the premises in the apartment with wooden finishing materials.

If you are looking for teams of construction specialists who provide finishing services for cottages of any size in Moscow, use the Yudu website. You can place an order right now for cheap. Qualified carpenters will perform:

crate and Finishing work using wooden boards
laying wood planks, laminate or parquet
sheathing of cabinets, baths and saunas with clapboard
arrangement of wine cellars and rest rooms
installation of wooden arched structures, arbors, shelf plinths

If you need to perform finishing woodwork, you will know the price for them when Yudu calculates the repair estimate.

The cost of services depends on the area of the premises. Coordinate the price and time of the complex repair with a team of specialists in advance.

There are also private companies registered in Yuda that make solid wood furniture. You can place an order for production:

wooden windows, doors, decorative beams, bar counters
built-in furniture sections, sets
cupboards with antique fronts designed for offices and libraries
tables, chairs, chests of drawers, couches, sofas, armchairs and other products

In their work, Yudu service performers use modern carpentry technologies and valuable wood species. The duration of the installation of furniture sections depends on the complexity and volume of the order.

Applying for YouDo

You can find out the prices for carpentry work and order the services of qualified performers around the clock in Yuda. To receive offers from experienced carpenters, you must complete and publish an application. Choose a contractor from among those who responded and agree on prices for joinery work.

Qualification - construction carpenter (4th category); carpenter (4th category);

parquet floor (3rd category)

Normative period for mastering the program on the basis of basic general education - 2 years 5 months.

Objects of professional activity:

Buildings and structures, their elements;

Materials for carpentry, carpentry and parquet work;

Technologies of carpentry, carpentry and parquet works;

Manual and mechanized tools, fixtures and equipment for the production of joinery, carpentry and parquet work;

Drawings for the production of joinery and carpentry.

The master of carpentry and parquet works will know:

The main types of timber, species and properties of wood, the basics of wood cutting, the main operations for wood processing, the main types of glazing work;

Hand and electrified tools;

Types of carpentry and carpentry connections (couplings);

Basic designs of joinery and building products;

Rules for handling antiseptic and fire retardant compounds, techniques for coating parts or wooden structures with brushes;

General information about parquet work, the composition of parquet floors, types of parquet planks, parquet boards and parquet floors, requirements for parquet floors and coatings, tools, mechanisms and machines used in the construction of parquet floors; – technology of manufacturing and installation of straight-line milled parts of a simple profile and joinery;

Techniques for cutting knots and resins in wood, ways to seal them;

Reading simple drawings and sketches;

Methods for the manufacture of joinery products of medium complexity; methods of clean shearing of timber, trimming logs, harvesting single piles and single-column supports;

Methods for preparing rectilinear formwork panels and partitions for plastering;

Methods for arranging plinths, boardwalks, partitions, sheathing and roof elements;

The main elements of the wooden parts of buildings and wooden structures and the requirements for their quality;

Safe methods and techniques of work, when performing work by profession.

Master carpentry and parquet work will be able to:

Perform simple joinery, carpentry, glass and parquet work;

Perform basic woodworking operations;

Carry out simple and medium complexity carpentry work, manufacture and install milled trim parts, skirting boards, straight-line handrails of a simple profile, etc.;

To make parts and assemble from them door panels and window frames of rectangular shape of all types;

Install paneled partitions, door and window blocks, window sill boards and mounting bars;

Carry out the cutting of internal walls from logs, the installation of simple temporary structures: terraces, verandas, vestibules, porches, as well as sheds, sheds, walk-throughs, showers; arrangement and change of wooden bases and chairs, arrangement of frame walls; clean sheathing of walls and ceilings, installation, re-laying and rallying of the upper plank coverings (clean floors) from individual boards, as well as the installation of floors from bars, glued boards, fibreboard, end checkers, from particle boards with sealing joints.

Subjects studied:

Basics of building production;

Construction graphics;

Electrical equipment;

Fundamentals of construction economics;

Life safety; occupational Safety and Health.

Carpentry work;

Performing carpentry work;

Carrying out work on the installation of parquet floors.

Job Opportunities: the graduate will be able to work at construction and furniture production enterprises of various forms of ownership.

Master of carpentry and parquet works- one of the oldest professions in the world, and woodworking is one of the first crafts that a person mastered. Indeed, after a person picked up an ordinary stick, he found many options for its use. Spoons, scoops, stools and many other items invented by man for his own convenience were made of wood. A joiner, carpenter and parquet worker is a professional worker, a skilled craftsman, a craftsman who processes wood and makes products from it, as well as products on a wooden basis, using other materials (plastic, metal, glass, etc.).
The master of carpentry and parquet works is a multidisciplinary profession. He manufactures furniture (upholstered, cabinet, office), takes part in construction: manufacture and installation of doors and windows, furniture that is built in, installation of partitions, insertion of locks and handles, wall cladding with wooden panels, as well as the manufacture of a variety of wood products: running skis, hangers, cornices, candlesticks and all kinds of decorative items, log cabins, saunas, both manually and using woodworking machines and fixtures.

A modern master of joinery, carpentry and parquet works is a person who knows a lot. And not only in my profession. He works not only with wood, but also with materials that replace wood, with in a different way fastening and installation of products, metal screws, staples, nails, adhesives, materials necessary for cladding, wrapping, processing, wood products (films, varnishes, paints, fabrics).
Workplace masters of carpentry and parquet work - most often a workbench or its modern modifications. He fixes wooden blanks, marks and processes the product according to the existing drawing. Ways of wood processing: sawing finishing, assembly. Each of these operations can be performed both manually and with the help of traditional tools (saws, planers, jointers, chisels, drills, chisels), and on special woodworking machines.

GBPOU RK "Yalta College of Economics and Technology" has all the necessary material and technical base for mastering the profession of a master of carpentry and parquet work.
An important section of carpentry is the ability to choose material and finish it correctly so that the product brings aesthetic pleasure to people. The master does not achieve perfection right away, only as a result of considerable practice a person begins to feel the wood well, to balance the strength and direction of the tool with the hardness of the wood and the direction of its fibers.
Under the guidance of experienced teachers and mentors, students of GBPOU RK "Yalta College of Economics and Technology", who chose this profession, in the process of learning they are able to make masterpieces of carpentry art. After graduating from college, yesterday's inexperienced schoolboy turns into a young high-class master of his craft, whose profession is in demand everywhere.
You can acquire carpentry skills in our college!

The master of joinery, carpentry, parquet and glass works is a qualified specialist in the field of construction and housing and communal services. Specialization 01/08/24 provides for the professional performance of joinery, carpentry, glass and parquet work.

Level of education: Primary vocational education
Base of education: Secondary general education, basic general education
Form of study: Full-time, Part-time (evening)
Duration of study: 10 months, 2 years. 10 months
Qualifications:

Construction joiner - carpenter - parquet worker
Construction joiner - carpenter - glazier

A document on obtaining this education in one of the secondary schools in Moscow makes the master in demand in construction corporations and at enterprises and large industrial associations in the construction industry. The graduate is also able to plan and conduct entrepreneurial activities.

If you have no desire or opportunity to study on a general basis, our company offers to buy a diploma of a master of joinery, carpentry, parquet and glass work. The "crust", made to order by our specialists, will fully correspond to the original. We have sufficient technical means so that the authenticity of the diploma is not in doubt.

Professional disciplines for the profession

The competence of the master of carpentry, parquet and glass works includes wall and ceiling sheathing on the frame with industrial finishing materials, repair of wooden products and structures, as well as the production of products on woodworking machines.

To carry out activities of this kind, a specialist must master a number of disciplines:

General professional cycle:
Basics of construction production
Construction graphics
English in professional activity
Life safety
Physical education
Professional modules:
Execution of carpentry and carpentry-assembly, including the technology of manufacturing joinery products.
Performing carpentry work, including the technology of arranging wooden structures and assembling wooden houses.

The acquired knowledge is consolidated in the educational and industrial practices. According to the list of qualifications, students receive skills to perform glass and parquet work.

Secondary educational institutions of Moscow, issuing a diploma in the specialty "master of joinery, carpentry and parquet work."

There are 3 secondary specialized educational institutions in the capital, in which they master the profession of a worker in this specialty:

College of Architecture, Design and Reengineering No. 26
Moscow College of Architecture and Urban Planning
College of Technology No. 21

You can buy diplomas of any of the specified secondary schools in our company on favorable terms. The purchase will be a profitable solution for woodworkers and glass craftsmen who, for one reason or another, do not have confirmation of their professionalism.

Age restriction for education is not a problem! Our company provides for the issuance of diplomas of past years on forms of the corresponding standard. This is very important as the uniforms have changed several times since 1996. Other companies do not always take this fact into account, but we will not let you down in front of the employer, the diploma will be completed perfectly!

Remoteness educational institution from the place of residence is also not a hindrance. You can buy a diploma of a painter of carpentry, parquet and glass works with delivery to any region of the Russian Federation. Payment is made solely upon the fact of the completed order: in cash upon receipt by courier, or cash on delivery by mail.

It might be useful to read: