Characteristics of the shops of public catering establishments. Radchenko L.A. Organization of production at catering establishments Appointment of workshops at a catering establishment

Territory requirements. To comply with established sanitary standards in the work of enterprises Catering it is necessary to comply with the hygienic requirements for the territory of the enterprise.

The choice of a place for building is of great importance. The site must be dry, on an elevated, level place, at least 1 km away from landfills and at least 100 m from enterprises that pollute the atmospheric air and soil.

The territory of the public catering enterprise should be kept clean: in winter it should be cleared of snow, in summer it should be watered.

Requirements for the layout and arrangement of premises. All premises of a public catering enterprise, depending on the purpose, are divided into production ones (kitchen, cold shop, preparation shops: meat, fish, vegetable; confectionery shop, distributing, washing kitchen utensils); trade (hall, washing tableware, service room, buffet, bread slicer, premises for taking home meals, selling semi-finished products, an entrance hall, a cloakroom, a vestibule, a toilet with a washbasin); warehouse (refrigerators, warehouses for dry products, vegetables, linen, inventory); administrative and household (director's office, accounting, premises for waiters, sanitary facilities for staff, linen, wardrobe, showers).

The layout of all premises should be rational, proper organization labor, meet sanitary requirements for the maintenance of the enterprise and better customer service.

In accordance with sanitary and hygienic requirements, the layout of the premises should ensure the consistency and accuracy of technological processes, as well as the shortest path for the passage of raw materials from the moment they are received to the release of finished products.

It is impossible to allow the crossing of flows of raw materials, semi-finished products and finished products, dirty and clean utensils, to exclude contamination of food with microbes and the possibility of foodborne infectious diseases and food poisoning.

The area of all premises is determined depending on the type, capacity and number of seats in the hall of the catering establishment.

Industrial premises must be located on the ground floors, providing normal natural lighting of the workshops. Area industrial premises according to sanitary standards, it should include an area free from equipment, which is 5.5 m2 per worker. The height of the premises should be at least 3-3.3 m.

At enterprises operating on raw materials, all procurement workshops (vegetable, meat, fish) are placed between storage facilities and a hot shop. This contributes to compliance with the flow technological process, ensuring the shortest path for the movement of raw materials and semi-finished products and reducing the possibility of additional contamination of products with microbes.

The meat shop is located in a row of blank shops. Its device must ensure the sequence of the technological process of processing meat, from defrosting carcasses to preparing semi-finished products.

Taking into account the different sanitary conditions of meat, half-gutted poultry, offal with high humidity, it is necessary to provide separate lines for their processing.

The fish shop is located next to the meat shop. In small enterprises, the processing of fish according to sanitary standards is allowed in meat and fish shop, but with obligatory separate lines for processing meat and fish. In the fish shop, as well as in the meat shop, one should strictly observe the sequence of processing raw materials and preparing fish semi-finished products with the allocation of jobs for the preparation of fish cutlet mass. The workshop must provide refrigerated cabinets.

The hot shop (kitchen) is equipped near the cold shop and the dispensing room, clearly delimiting the soup and sauce departments. In the hot shop, the technological process of cooking is completed, therefore, the sanitary and hygienic state of the finished food depends on the proper organization of this shop.

To ensure the consistent implementation of the technological process, and therefore, to improve the quality of dishes, it is considered the most rational to install sectional modular equipment in the workshop, consisting of a number of electrothermal devices (stoves, boilers, frying pans, ovens, etc.) , which are located in one serial line. A common ventilation suction is mounted above the equipment.

Such equipment saves production space and improves working conditions, reducing unnecessary movements and reducing the physical load of cooks. It improves the sanitary condition of the food being prepared and the workshop as a whole by reducing the path of movement of products, the sequence of technological operations.

Taking into account the increased temperature, humidity and air pollution (acrolein, carbon dioxide) of the hot shop, it should be equipped with supply and exhaust ventilation, which ensures normal working conditions for cooks and the microclimate of adjacent premises.

The cold shop produces products that are not subjected to heat treatment during the cooking process. Therefore, increased sanitary requirements are imposed on the design of the workshop.

In order to avoid secondary contamination of cold dishes with microbes, this workshop must be separated from the procurement workshops, as close as possible to the hot workshop and the distributing one. For the same purpose, workplaces are delimited in the workshop for the preparation of meat, fish, vegetable, sweet dishes and sandwiches, since these dishes are prepared from raw and heat-treated products with different sanitary conditions.

The confectionery shop is located in isolation from all production facilities, protecting its products from bacterial contamination. For the same purpose, a clear delineation of technological operations is envisaged in the workshop itself, highlighting separate rooms: a pantry for a daily supply of raw materials with a refrigerator and a food preparation department; room for cleaning oil; a room for processing eggs with a compartment for preparing egg mass with refrigeration equipment for its storage; rooms for preparing dough with a section for sifting flour; compartment for cutting dough and pastries; department for the preparation of finishing semi-finished products (syrups, lipsticks, jelly); cream preparation department with refrigeration equipment; a room for finishing confectionery products with a refrigerator; storage room for packaging materials; washing intrashop packaging and large inventory; washing and sterilization of confectionery bags, tips, small inventory; a room for washing and drying returnable containers; confectionery expedition with a cold store for cream products.

The layout of these premises should correspond to the sequence of the technological process of preparing confectionery products and exclude the possibility of oncoming or crossing flows of raw materials and finished products.

Washing of kitchen utensils is placed next to the hot shop and equipped with washing baths with hot and cold water supply, racks for storing dishes.

Requirements for interior decoration. The decoration of the premises of public catering enterprises has a large hygienic value and must meet certain requirements. The interior decoration of the premises should be without unnecessary architectural details in order to avoid the accumulation of dust.

For the decoration of industrial, warehouse and domestic premises, materials of light colors, waterproof with a smooth, easy-to-clean surface are used. Ceilings are usually covered with adhesive whitewash, walls at a height of 1.8 m are laid out with ceramic tiles or synthetic materials or covered with oil paint. Window frames and doors are painted with light-colored oil or enamel paint. The floors are lined with metlakh tiles.

The hall and administrative premises are finished with beautiful, modern, easy-to-clean materials (wood, plastic, linoleum, glue and oil paint).

The walls of the halls in dining rooms are usually painted in soothing warm colors or finished with synthetic materials, and in restaurants and cafes they are lined with precious woods, particle boards. To reduce noise, walls and ceilings are finished with sound-absorbing perforated slabs coated with a refractory composition, which are well washable. The floors in the halls must be smooth, non-slip, moisture resistant. In dining rooms, floors are often covered with plastic, linoleum, and in restaurants, cafes for floors they use parquet covered with colorless varnish, synthetic carpets of a single color or rolled materials based on synthetic resins.

Requirements for water supply, sewerage, heating, microclimate, ventilation and lighting. Water supply to public catering establishments is carried out from a centralized water supply network, and in the absence of a water supply system, from an artesian well or a mine well with water supply to all industrial premises.

Drinking water quality must comply with the requirements of GOST “Drinking water. Hygiene requirements and quality control”.

To supply the enterprise with hot water, a special hot water supply network is equipped. Hot water is supplied through mixers to all sinks, industrial and washing bathtubs, showers. Its temperature should not be lower than 75°C, and for washing dishes - not lower than 90°C. Hot water is not used for cooking, as it does not meet sanitary requirements.

Sewerage is of great epidemiological importance for organizing the cleaning of public catering establishments from household and fecal wastewater. It must meet certain health requirements.

To prevent the formation and ingress of harmful substances into the air of industrial premises, it is necessary: strictly observe the technological processes of cooking; ensure complete combustion of fuel in gas stoves, coal-fired, wood-burning appliances; it is recommended to equip workplaces where flour, powdered sugar, etc. are sifted with a local exhaust.

Heating must ensure the air temperature in the premises of public catering establishments in accordance with hygiene standards. The most favorable for a person is considered to be an air temperature of 18-20 ° C with a relative humidity of 40-60% and an air speed of 0.3 m / s.

The most perfect and hygienic is the low-pressure central water heating with the temperature of the radiators not exceeding 85°C. In catering establishments, it is recommended to install smooth-walled heaters that can be easily cleaned of dust.

Ventilation of premises contributes to the improvement of the microclimate in the workplace, which affects working conditions, maintaining health and increasing the efficiency of personnel.

Artificial lighting should be bright enough.

Hard to imagine modern sphere service without catering. Restaurants, cafes, canteens hospitably open their doors to numerous visitors, trying to attract them with impeccable cuisine, quality service and affordable prices. Statistics show that the network of public catering establishments and the number of visitors to them is increasing annually. This industry is extremely interesting for investors and those who wish to open their own business.

However, despite all its attractiveness, the food industry is a labor-intensive and energy-intensive production that requires considerable financial investments. And you can get a real return only if you correctly organize the production process, choose the right technological equipment public catering and establish the production of high-quality products that are in steady demand among consumers.

Development of the menu, production program and stock of raw materials

The menu of a catering establishment is not just a list of dishes offered to visitors. Here, first of all, the interests of the serviced contingent are taken into account, their preferences are revealed, as well as financial opportunities. The menu should be in demand, popular and as diverse as possible, where each visitor can choose what he likes.

Based on the menu and the number of visitors that are planned to be served during the working day, they make up a production program, where, according to the investment norms, they calculate required amount raw materials per shift. Based on these data, and taking into account the shelf life of products, the optimal stock of the volume of raw materials required by the enterprise for rhythmic work is determined. They draw up contracts with suppliers, develop a delivery schedule, and organize unrefrigerated and refrigerated warehouses for storing goods.

Organization of warehouse work

Warehouses in which the necessary stock of raw materials is stored should be located in a single block, which will ensure convenient acceptance and release to the blank shops. The recommended area of warehouse premises is 15-20% of the total area of enterprises. Proper organization warehousing allows you to solve the following tasks:

acceptance of goods in terms of quantity and quality;
ensuring storage in accordance with all sanitary and hygienic requirements;
maintaining stocks of raw materials at an optimal level.

The temperature and humidity in the warehouse must be maintained within acceptable limits, and to ensure the frequency of air exchange, natural or mechanical ventilation is provided. Here they install warehouse equipment, commodity scales, as well as all the necessary equipment that is required to check the quality of the goods and release them for production. The main warehouse equipment, racks and undercarriages, is designed for placement and storage of goods, and for the mechanization of the processes of acceptance and release, it is advisable to equip warehouses with mobile trolleys.

For the storage of perishable products in warehouses, refrigeration equipment, the number of which and the volume of cooled chambers depend on the amount of raw materials to be stored. The main types of refrigeration equipment installed in warehouses are cold rooms and refrigerated cabinets, as well as chest freezers for those products that require low-temperature storage.

Organization of work of production shops

Procurement catering enterprises with a full cycle of processing raw materials contain: meat, vegetable, flour or confectionery shops, as well as hot and cold, where direct cooking is carried out. In pre-cooking enterprises operating on semi-finished products, the production process is organized in the semi-finished products pre-cooking workshop, in which a flour department can be organized.

A production program is developed for each workshop, the heads of workshops or foremen receive the necessary raw materials from the warehouse, deliver them to the workshop and distribute duties among the cooks responsible for the preparation of a particular product. Raw materials are subjected to primary processing, after which everything is like technological stages necessary for the preparation of semi-finished products. Prepared semi-finished products are placed in a functional container and sent to a hot or cold shop, where, after final processing, they are brought to full culinary readiness. The rational organization of the work of the hot shop directly depends on the well-coordinated work of the blank shops. The technological equipment of the hot shop is installed here, with the use of which all types of heat treatment are performed.

The cold shop receives products, both those that have undergone heat treatment and those that have not undergone heat treatment, therefore, the organization of the work of the cold shop, first of all, is determined by the coherence of production processes in the hot and vegetable shops. And the equipment of the cold shop allows not only to mechanize the processes of preparing salads and snacks to the maximum, but also maintains the required temperature for their storage.

Ready meals are transferred to gastronorm containers and sent to the distribution line for sale. Here they are portioned and released to consumers. In restaurants, on-duty dishes are prepared in small volumes and sold as needed, and the preparation of custom-made portioned dishes is started after receipt of requests from waiters.

Organization of customer service, product sales and dishwashing

Every catering establishment must pay Special attention consumer service. Important role the interior design and comfortable arrangement of the dining room plays a role, so that visitors have a desire to come here again and again. Restaurants organize service by teams of waiters who must not only take and deliver orders, but also create a friendly atmosphere and provide professional advice on the characteristics of dishes and the technology of their preparation. At lunchtime, in order to reach a larger number of visitors, it is advisable for restaurants to organize the sale of inexpensive set meals.

In canteens and cafes, the sale of lunch products is organized according to the method of free choice of dishes. For these purposes, a self-service distribution line is equipped, on which short-term storage, portioning, decoration and dispensing of snacks, first, second and third courses are carried out in compliance with the temperature of their serving. modern line distribution in the dining room is a technological equipment for public catering, which includes a set of counters, showcases and food warmers. Service is carried out by one or several cooks-distributors, and visitors, moving with a tray along the rails, have the opportunity to choose their favorite dishes. The speed of service, which is especially relevant during rush hour, is affected by the timely preparation of dishes by hot and cold shops, as well as the proper organization of the work of washing tableware, which eliminates interruptions in clean dishes, cutlery and trays.

Additional services and increase in own production output

In order for a catering company to work with a stable profit, it is necessary to develop a number of measures to increase the volume of sales of products own production. Indeed, as a rule, the potential of enterprises is unusually large, and the installed technological equipment for catering is characterized by high productivity.

In addition to the dining hall, most catering establishments organize a banquet hall where solemn feasts are held for groups of visitors. In the warm season, summer venues are opened, where they sell a certain range of drinks and goods.

It is advisable to arrange the sale of products of own production through a culinary store. It is equipped with counters and the necessary types of refrigeration equipment are installed, including chest freezers, which provide a demonstration of goods, taking into account the storage temperature.

In the culinary shop, products of all workshops of the enterprise can be presented. These are not only meat and vegetable semi-finished products, various types of dough, but also ready-made salads, culinary and confectionery. The development of the assortment of a culinary store should be carried out by technologists and economists of the enterprise, since one of the ways to attract customers is affordable prices for products. In addition, you can organize remote trade and the supply of products of your own production. retail chains at wholesale prices.

Technological equipment of catering establishments

To perform their main functions, namely, the manufacture and sale of culinary products, catering establishments are equipped with a wide range of equipment. All technological equipment for public catering is classified into the following types:

electromechanical;
thermal;
refrigeration;
auxiliary or neutral.

The types of technological equipment, its capacity and the number of units are determined as a result of special calculations and taking into account:

type of enterprise;
organization of production (on raw materials or semi-finished products);
production program (menu plan);
forms and methods of customer service.

All catering equipment must meet the needs of the enterprise in terms of productivity, perform all the necessary technological operations, ensure storage at certain temperatures, create comfortable working conditions for service personnel and organize customer service at the highest level.

The company Petrokhladotekhnika presents a wide range of modern technological equipment for public catering, the installation of which will be the key to the successful operation of any enterprise.

Send your good work in the knowledge base is simple. Use the form below

Students, graduate students, young scientists who use the knowledge base in their studies and work will be very grateful to you.

Hosted at http://www.allbest.ru/

Introduction
1. Characteristics of the designed workshop
2. Technological part
3. Determination of the number of dishes and drinks sold in the hall
3.2 Menu planning
3.3 Settlement menu
Conclusion
Bibliography
Applications

Introduction

Public catering is a branch of the national economy, which is based on enterprises characterized by the unity of forms of organization of production and customer service and differing in types and specializations.

Development of public catering:

v Provides significant savings in social labor due to a more rational use of technology, raw materials;

v Provides workers and employees during the working day with hot food, which increases their efficiency, maintains health;

v Gives the chance of the organization of the balanced rational food.

Catering establishments are responsible for the health of their customers and therefore the choice of products and the preparation of meals play an important role. The tastes of visitors who prefer varied and light dishes should also be taken into account.

A huge role in increasing the number of industrial enterprises eating in canteens is played by social programs operating at the enterprise. Such changes in requests directly affect the choice of cooking equipment.

The main indicator of catering in canteens and industrial enterprises is the speed of service. To enlarge throughput canteens and reduce queues, improvements such as food counters, revolving counters and food and drink vending machines have been introduced.

In the canteens industrial enterprises vending machines for drinks (62%) and snacks (31%), as well as hot meals for shift workers (23%) are currently being installed.

The speed of service is also important in those canteens where long counters are used to distribute dishes, on which it is necessary to maintain a certain temperature and quality of the finished dishes.

The expansion of the catering market promotes the design and development of special catering equipment that meets specific requirements. In recent years, systems for freezing ready meals have been created. The centralization of food preparation led to the purveyor industry.

Creation necessary conditions to meet the needs of people in good nutrition at the place of work, study, residence and recreation, improving the quality of service and providing additional services public catering enterprises are the most important socio-economic tasks of the state. Of paramount importance in this regard is the set of measures aimed at rational organization networks of public catering enterprises, construction of new enterprises and reconstruction of existing ones, introduction of advanced technologies and forms of service.

When determining the type of enterprise, the following factors are taken into account:

range of products sold, their diversity, complexity of manufacturing;

technical equipment (material base, engineering and technical equipment and equipment, composition of premises, architectural and planning solution);

service methods;

staff qualifications;

quality of service (comfort, ethics of communication, aesthetics, etc.);

range of services provided to consumers.

Canteens distinguish:

· according to the range of products sold - general type and dietary;

· on the served contingent of consumers - school, student, etc.;

· at the location - public, at the place of study, work.

The represented canteen is located on the territory of the plant, being a working canteen (at an industrial enterprise) and belongs to the canteens of a general type.

Based on the type of establishment, the operational characteristics of the food establishment and maintenance requirements can be established.

The enterprise ensures the safety of life and health of consumers and the safety of their property, subject to the "Rules for the production and sale of public catering products", approved by Decree of the Government of the Russian Federation of April 13, 1993 No. 332, sanitary and technological norms and rules, as well as fire and electrical safety requirements.

All catering establishments must comply with the requirements normative documents for the security of services:

SanPiN 42-123-5777, SanPiN 42-123-4117, collections of recipes for dishes and culinary products;

requirements for the safety of food raw materials and products - in accordance with the requirements of the MBT 5061;

environmental safety - SanPiN 42-123-5777, SNiP 2.08.02;

fire safety - GOST 12.1.004;

electrical safety - SNiP 11-4

The enterprise has convenient access roads and pedestrian access to the entrance, the necessary reference and information signs. The territory of the plant adjacent to the dining room has artificial lighting in the evening.

Carrying out unloading and loading operations takes place only through the access roads of the public catering establishment.

Access roads for road transport are necessary both for the delivery of products and for the removal of garbage and food waste. For the convenience of entry of vans and trucks directly into the building, the doors of the landing stages for receiving products open into the courtyard, which has a waterproof coating and good drainage.

The sites with garbage collectors are more than 20 meters away from the windows and doors of the premises of the enterprise.

Architectural and planning solution and structural elements of the building used Technical equipment complies with SNiP 2.08.02.

The enterprise provides for emergency exits, stairs, instructions on how to act in an emergency (excerpts from which in the form of brief bright announcements and diagrams are posted inside the enterprise in places of the greatest concentration of personnel - locker rooms, telephone, exit to the stairs, etc.), warning system and fire protection equipment.

The enterprise is equipped with engineering systems and equipment that provide the necessary level of comfort, including: hot and cold water supply, sewerage, heating, ventilation, radio and telephone communications.

The entrance to the enterprise provides the simultaneous movement of two counter flows of consumers to the entrance and exit, as well as separate entrances and exits for consumers and staff.

1. Characteristics of workshops

Cooking can be seen as a production process in which the food goes directly through several stages, described as a work route - from the supply of raw products to the final decoration and distribution of dishes. In order to have the right equipment in the right place, to reduce the possibility of collisions and crowding of workers, it is necessary to carefully plan work routes, avoiding their intersections. A simple working route can be represented as follows: Reception of products - Storage - Cutting - Cooking - Distribution.

With the increase in the size of the enterprise, both the specialization of equipment and the concentration of work appear, so several parallel work routes are being developed. Along with the main food preparation route, it is necessary to provide auxiliary routes, such as collecting and disposing of waste, washing and reusing dishes. Food waste and garbage are disposed of through the food reception areas, i.e. on the reverse route.

Food needed to provide one day's menu is usually stored in small pantries located in or near the pre-cooking area, while a week's supply of food is housed in storage areas.

Large public catering enterprises have a variety of shops specializing in the types of processed raw materials and manufactured products: meat, fish, vegetables, hot, cold, confectionery. Warehouse, container, sanitary facilities and some other services are classified as auxiliary shops.

A workshop is an administratively separate primary production unit of an enterprise in which mechanical culinary processing of raw materials, preparation of semi-finished products or production of finished products are carried out.

The chains are divided into:

1. blank (meat, fish, poultry, vegetable, meat and fish);

2. pre-cooking (cold, hot);

3. specialized (flour products, confectionery, culinary).

Structure of production shops

The workshop is separated into an independent production unit, because this area of work specializes in the manufacture of certain products and several teams of workers work under the guidance of foremen.

In the procurement workshops, they perform mechanical processing of meat, fish, poultry, vegetables and the production of semi-finished products to supply the kitchens of their enterprises, as well as pre-cooking enterprises (branches), culinary shops, small retail chains.

When organizing blank shops, the flow of production and the sequence of technological processes must be achieved, for which processing lines are determined certain types products. So, in the vegetable shop it is advisable to organize three technological processing lines: potatoes and root crops; onion vegetables; cabbage, greens and other vegetables.

The mode of operation of blank shops depends on the type of enterprise, the volume of production and the method of selling semi-finished products. The blank shops serving only the enterprise work, as a rule, in one (day) shift.

Some general requirements for the organization of the work of production shops of public catering establishments.

All production workshops are equipped with sinks with hot and cold water supply. At the same time, such designs of mixers should be provided that exclude re-contamination of hands after washing.

The internal sewerage system for industrial and domestic wastewater must be separate with independent discharges into the on-site sewerage network.

Production equipment and washing baths are connected to the sewerage network with an air gap of at least 20 mm from the top of the intake funnel. All internal sewage receivers have hydraulic gates (siphons).

All production workshops, washing, defroster, loading, storage of food waste should be equipped with drain ladders with a floor slope towards them.

When using air conditioning systems, the microclimate parameters in industrial premises must comply with the optimal values of sanitary standards.

Openings of ventilation systems are closed with a fine-meshed polymer mesh.

Equipment and washing baths, which are a source of increased moisture, heat, are equipped with local exhaust systems with a preferential exhaust in the zone of maximum pollution.

The organization ensures the air-thermal balance of the room.

Natural and artificial lighting in all rooms must comply with the requirements for lighting. This makes maximum use of natural light.

All labor-intensive operations associated with lifting and moving heavy objects are mechanized.

The walls of industrial premises to a height of at least 1.7 m are finished with facing tiles or other materials that can withstand wet cleaning and disinfection. Ceilings are plastered and whitewashed or finished with other materials. The floors are made of impact-resistant non-slip materials and are sloped towards the drains.

Production workshops are provided with a sufficient amount of the necessary equipment and logistical support items.

In order to prevent infectious diseases, cutting equipment is assigned to each workshop and has a special marking.

Cutting boards and knives are marked according to the product being processed on them.

It is recommended to use stainless steel utensils for cooking and storing prepared food. Aluminum and duralumin utensils are used only for cooking and short-term storage of food.

Vegetable shop. At enterprises vegetable shop they are arranged in such a way that, on the one hand, it is located not far from the vegetable storage warehouse, and, on the other hand, it has convenient communication with cold and hot shops. In this case, conveniences are created for the delivery of potatoes and vegetables to the workshop, as well as the technological chain: warehouse - vegetable workshop (pre-treatment) - hot shop(final processing).

In this workshop, vegetables are prepared for heat treatment. Vegetables for salads and fresh fruits are washed and processed, after which they are moved to pre-cooking workshops. The technological process of processing vegetables consists of sorting, crushing, cleaning, cleaning after mechanical cleaning, washing, cutting.

The main equipment of this zone is cutting tables, tables for peeling potatoes, washing baths, garbage collectors, mobile equipment and machines for peeling potatoes, for cutting into cubes, straws, as well as for cutting other vegetables, undercarriers.

Workplaces are equipped with tools, inventory for performing certain operations.

In the vegetable shop, a line for processing potatoes and root crops and a line for processing fresh cabbage and other vegetables and herbs are distinguished. The equipment is placed in the course of the technological process.

The use of containers for collecting garbage allows you to remove garbage collected at different places along the route of the entire enterprise.

Meat and fish shop. Workplaces in the meat shop are organized by technological lines:

large meat processing cattle pork, lamb entering the workshop in quarters

· thawing (defrosting) of frozen fish or soaking salted fish, cleaning from scales, gutting, washing, making semi-finished products.

· Centralized production of semi-finished products from chickens, processing of by-products is carried out by poultry-heading workshops. They process raw materials coming from suppliers. In addition to poultry, offal (kidneys, liver, tongues, heart, etc.) is processed in the workshop.

IN in general terms the equipment of this workshop includes all kinds of devices for chopping and butchering meat, cutting bacon, cutting meat, sawing bones, preparing semi-finished products, minced meat.

The shop is equipped with refrigerators.

Confectionary shop.

The scope of activity of the confectionery shop includes the preparation of hot sweets, cold desserts, confectionery, bakery products, finishing and finishing.

In the production structure of the enterprise, the confectionery shop occupies a special place. It works independently, regardless of the hot shop. The confectionery shop produces products that are sold not only in the halls, but also in culinary shops, branches, buffets.

The confectionery shop includes rooms for kneading dough, cutting and baking, preparing cream and finishing products, processing eggs, proofing yeast dough.

The main equipment includes tables, sinks, measures, machines for mixing, rolling and cutting dough, racks for baking sheets, etc. Pastry ovens, stoves and other equipment are located right in the workshop for convenience.

Hot shop. In the hot shop, heat treatment of products and semi-finished products is carried out, broths are cooked, soups, sauces, side dishes, main courses are prepared, flour culinary products are baked - pies, pies, etc., used as a side dish for first courses, and they also perform heat treatment of products for cold and sweet dishes.

Semi-finished products from all blank shops are sent to the hot shop. Therefore, the hot shop is located in such a way that it has convenient communication with the cold shop and is adjacent to the distribution, as well as to the washing table and kitchen utensils.

The hot shop is divided into two sections - soup and sauce.

The work of the hot shop, as well as other production sites, largely depends on the proper organization of workplaces, equipping them with appropriate equipment.

The production program of the hot shop is compiled on the basis of the range of dishes sold through shopping room.

Let's take a closer look at the cold shop of this enterprise.

For the preparation of cold dishes and snacks, sandwiches, sweet dishes, cold soups, a cold shop is organized. Its products are sold both directly in the hall, and in buffets and culinary shops.

Since a significant number of dishes and products are not subjected to heat treatment in a cold shop, it is necessary to strictly observe sanitary rules when organizing the technological process.

The workshop is equipped with pedal-operated sinks to avoid re-contamination of hands. The surface of the walls behind sinks and sinks requires special protection against water and dirt. In addition to glazed tiles, special sheet materials, such as stainless steel, are used as wall cladding.

The floors in the cold shop are easy to clean, withstand heavy equipment, are resistant to water, dirt, oil, acids, alkalis, cleaning agents, and temperature extremes are made of stone tiles. The floor temperature is maintained by laying thermal insulation. All joints between floors and walls are rounded due to the material of the floor covering.

Natural lighting (window) is widely used in the cold shop of the enterprise. It has a northwest orientation and provides even natural light over work surfaces. The device for protection against insolation (blinds), reflect thermal radiation. The opening part of the window is located high enough and is equipped with screens against drafts in the working level.

The doors to the workshop are wide enough for transporting carts and equipment: double doors with sashes of unequal width. To facilitate the work of cleaners, plates are attached to the door to open the door with a push of a foot or hand.

In accordance with the technological process, workplaces for processing raw and boiled vegetables, gastronomic meat and fish products, portioning dishes, etc. should be clearly delineated; salads, vinaigrettes, sandwiches should be prepared only in batches and sold within one hour; observe the temperature regime of storage and distribution of cold dishes (10-140C).

For a safe sanitary regime, a bactericidal lamp was installed in the workshop.

To carry out the production program in the workshop, workplaces are provided that are equipped with equipment, utensils and inventory, depending on the type of technological and production operations performed.

The production program of the workshop (plan-menu) includes the range and quality of prepared dishes and snacks, sweet dishes and cold drinks. Cooks of the 4th and 5th categories work in the shop.

The workshop operates seven days a week, providing lunch from 12.00 to 15.00 and dinner from 19.00 to 21.00.

Required additional step production process at a catering establishment, this is a washing of dishes and equipment.

Reuse of kitchen utensils occurs in two specific areas:

Kitchenware

b Preparation

ü Boiler cleaning service

b Cooking

Dinner room crockery

In each case, cookware should be stored where it is used. The efficiency of the operation depends on the speed with which the cookware is returned to circulation and on the number of revolutions of the cookware.

Cooking is not continuous process, but rather a series of independent operations carried out in various places requiring different labor costs and time to complete.

It is not until the last stage, when the food is ready to be served, that the various foods are brought together.

2. Technological part

2.1 Determination of the number of consumers

Taking into account the working hours of the enterprise (from 12.00 to 15.00 and 19.00 to 21.00), the number of visitors for each hour is calculated by the formula:

Nh \u003d P? cch? xh / 100,

where: Nh - the number of visitors per hour;

P - hall capacity;

c h - turnover of a place in the hall during a given hour;

Data c h, x h are found in Appendix 2

N12-13 = 75? 2? 80/100 = 120

N13-14 = 75? 2? 80/100 = 120

N14-15 = 75? 2? 40/100 = 60

N14-15 = 75? 2? 60/100 = 90

Having calculated the number of visitors for each hour of operation of the enterprise, we draw up a table

TOTAL: 480 people

Summing up the number of visitors for each hour of operation of the enterprise, we get the number of visitors per day:

where: Nd - the number of consumers served during the day;

Nh - the number of visitors per hour.

Nd = N12-13+ N13-14+ N14-15+ N19-20 + N20-21

Nd = 120+120+90+60+90

Nd = 480 (persons)

The coefficient of recalculation of dishes (K) is drawn up according to the formula:

K \u003d N hour. / N (day), where

N hour - the number of consumers who passed through the trading floor in 1 hour;

N (day) - the number of consumers who passed through the trading floor per day.

K12-13 = 120 / 480 = 0.25

K13-14 = 120/ 480 = 0.25

K14-15 \u003d 90 / 480 \u003d 0.1875

K19-20 = 60 / 480 = 0.125

K20-21 \u003d 90 / 480 \u003d 0.1875

2.2 Determination of the number of dishes and drinks sold in the hall

Knowing the number of visitors per day, we determine the number of dishes sold during the day at the enterprise, according to the formula:

where nd is the number of dishes: Nd is the number of visitors per day; m - coefficient of consumption of dishes (at an industrial enterprise 2.8)

nd \u003d 480 * 2.8 \u003d 1344

We make a breakdown of dishes according to the assortment according to the formulas:

n \u003d Nd * m x. b.

n = Nd * m Ib.

n = Nd * m IIb.

n = Nd * m sl. b.,

where n is the number of cold, first, second and sweet dishes; Nd - the number of visitors per day; m - coefficient of consumption of respectively cold (0.5), first (1.0), second (1.0), sweet dishes (0.3).

n x. b. = 480 *0.5 = 240

n Ib = 480 *1, 0 = 480

n IIb. = 480 * 1, 0 = 480

n sl. b. = 480 *0, 3 = 144

Determination of the quantity of hot and cold drinks, confectionery and bread is carried out in accordance with the consumption norms in force in this type of enterprise. The number of drinks is determined by the formula:

where n is the number of drinks, confectionery and bread; H - consumption rate.

n hot drinks = 480 * 0.08= 38.4

n min. water \u003d 480 * 0.02 \u003d 9.6

n natural juices = 480 * 0.01 = 4.8

n rye bread = 480 * 200 = 96000

n wheat bread = 480 * 100 = 48000

n fruits = 480 * 0.05 = 24

TOTAL: 1344

TOTAL: 4664

When portioning drinks, juices, waters, the value of 1 portion is taken as 200 g of the product, a portion of rye bread - 30 g, wheat - 50, the portioning rate of fruit is on average 100 g.

food dish assorted menu

3. Menu development

3.1 Development of assortment minimum

The development of the assortment minimum is carried out using the Guidelines for the development, placement of a network of specialized public catering establishments and the requirements for their organization, which provide an updated range of dishes, drinks and culinary products for these enterprises. Assortment minimum for canteens at industrial enterprises. Cold dishes and snacks 4

Milk and dairy products 3

Second hot dishes with garnish 5

including milk porridge 1

Sweet dishes 2

Hot drinks 1

Cold drinks 1

Flour culinary and confectionery products 4

Bread is a must

3.2 Menu planning

For a better orientation of visitors when choosing dishes, the convenience of serving them, and a clearer organization of work at enterprises, several types of menus are compiled: with a free choice of dishes, complete meals, for special types of services (custom lunches, breakfasts, dinners, receptions, etc.) and banquets . Menus with a free choice of dishes are made up in almost all catering establishments. It allows the visitor to choose dishes according to their tastes and abilities.

The menu includes:

Cold meals and snacks

From fish and fish gastronomic products;

From meat, poultry and meat gastronomic products;

Salads and vinaigrettes (fish, meat, vegetables);

Cheeses, butter and various dairy products.

Transparent (broths with profiteroles, pies, pies, etc.);

Refueling (schi, borscht, pickles, etc.);

Puree (from vegetables, cereals, legumes, meat products, etc.);

Dairy (with cereals, pasta, vegetables);

Cold soups from vegetables and other products (okroshka, borscht, beetroot, botvinia, etc.);

Sweet soups from berries and fruits.

Second hot dishes

Fish, meat, poultry, potatoes, vegetables and mushrooms, cereals, legumes, pasta, flour from eggs and cottage cheese.

Sweet dishes

Compotes, kissels, mousses, jelly, fruits and berries, natural and in syrup, etc.

Hot drinks

Tea, coffee, cocoa.

Cold drinks of own production

From lemons, oranges, etc.

Flour culinary, bakery and confectionery products, baked, fried pies with various fillings, buns, muffins, cakes.

Rye and wheat bread. In addition to the specified assortment, confectionery products, mineral waters, juices are sold. When compiling the menu, several factors are taken into account:

an approximate range of products recommended for a public catering enterprise, depending on its type and the type of ration provided;

Availability of raw materials and their seasonality;

Qualification of personnel, production capacity and equipping it with trade and technological equipment;

labor intensity, i.e. time spent on the preparation of a unit of production;

the number of visitors per day.

3.3 Settlement menu

Exit, c.	No. according to the Collection of recipes	Name of dishes	Number of dishes
COLD DISHES AND SNACKS
		Herring with garnish


		Potato salad with pickles and tomatoes



		Fish broth with meatballs
		Shchi from fresh cabbage
		Milk soup with vermicelli

SECOND HOT DISHES

3.4 Compiling a table of dish sales

Based on the hall load table and the menu plan, the number of dishes of one or another name for each hour of the enterprise's work is determined by the formula:

Nhour = Nday K, where

Nday - the total number of dishes of this type;

K - coefficient of conversion of dishes.

For the dish "Herring with garnish"

N12-13 = 40 *0.25=10

N13-14 = 40 *0.25=10

N14-15 = 40*0.1875=7.5

N19-20=40*0.125=5

N20-21 =40*0.1875=7.5

For the dish "Boiled tongue with green peas"

N12-13 = 45 *0.25=11.25

N13-14 = 45 *0.25=11.25

N14-15 = 45*0.1875=8.5

N19-20= 45*0.125=5.625

N20-21 =45*0.1875=8.5

For Beetroot Salad with Cheese and Garlic

N12-13 = 20 *0.25= 5

N13-14 = 20 *0.25=5

N14-15 = 20*0.1875=3.75

N19-20=20*0.125=2.5

N20-21 =20*0.1875=3.75

For the dish "Potato salad with pickles and tomatoes"

N12-13 = 100 *0.25=25

N13-14 = 100 *0.25=25

N14-15 = 100*0.1875=18.7

N19-20= 100*0.125=12.5

N20-21=100*0.1875=18.7

For the dish "Salad of white cabbage with apples and celery"

N12-13 = 35 *0.25=8.75

N13-14 = 35 *0.25= 8.75

N14-15 = 35*0.1875=6.56

N19-20= 35*0.125=4.375

N20-21 =35*0.1875=6.56

For the dish "Fish broth with meatballs"

N12-13 = 160 *0.25=40

N13-14 = 160 *0.25=40

N14-15 = 160*0.1875=30

N19-20=160*0.125=20

N20-21=160*0.1875=30

For the dish "Schi with fresh cabbage"

N12-13 = 180 *0.25=45

N13-14 = 180 *0.25=45

N14-15 = 180*0.1875=33.75

N19-20= 180*0.125=22.5

N20-21=180*0.1875=33.75

For the dish "Milk soup with vermicelli"

N12-13 = 140 *0.25=35

N13-14 = 140 *0.25=35

N14-15 = 140*0.1875=26.25

N19-20= 140*0.125=17.5

N20-21 =140*0.1875=26.25

For the dish "Pork meatballs with pasta"

N12-13 = 180 *0.25=45

N13-14 = 180 *0.25=45

N14-15 = 180*0.1875=33.75

N19-20= 180*0.125=22.5

N20-21=180*0.1875=33.75

For the dish "Liver "Brizol" with boiled potatoes"

N12-13 = 100 *0.25=25

N13-14 = 100 *0.25=25

N14-15 = 100*0.1875=18.7

N19-20= 100*0.125=12.5

N20-21=100*0.1875=18.7

For the dish "Cabbage Schnitzel with Sour Cream"

N12-13 = 100 *0.25=25

N13-14 = 100 *0.25=25

N14-15 = 100*0.1875=18.7

N19-20= 100*0.125=12.5

N20-21=100*0.1875=18.7

For the dish "Rice milk porridge with butter"

N12-13 = 100 *0.25=25

N13-14 = 100 *0.25=25

N14-15 = 100*0.1875=18.7

N19-20= 100*0.125=12.5

N20-21=100*0.1875=18.7

The data obtained is summarized in a table:

	Name of dishes	Number of meals per day
	Herring with garnish
	Boiled tongue with green peas
	Beet salad with cheese and garlic
	Pickled cucumber and tomato salad
	White cabbage salad with apples and celery
	Fish broth with meatballs
	Shchi from fresh cabbage
	Milk soup with vermicelli
	Pork patties with pasta
	Liver "Brizol" with boiled potatoes
	Cabbage schnitzel with sour cream
	Milk rice porridge with butter

4. Development of TTK

Technical and technological map No. 1 Potato salad with pickles and tomatoes

Application area

This technical and technological map has been developed in accordance with GOST R 53105-2008 and applies to the signature dish "Potato Salad with Pickled Cucumbers and Tomatoes", produced by the Park Inn Pribaltiyskaya hotel and sold in the service canteen.

Raw material requirements

food raw materials, food products and semi-finished products used to prepare the dish "Potato salad with pickles and tomatoes" must comply with the requirements of the current regulatory and technical documents, have accompanying documents confirming their safety and quality (certificate of conformity, sanitary and epidemiological conclusion, certificate of safety and quality, etc. .). Processing of all products used must be carried out in strict accordance with established sanitary norms and rules. The processing of a raw egg used for cooking is carried out in a specially designated place in the following sequence: with a warm 1-2% solution of soda ash, a 0.5% solution of chloramine, or other detergents and disinfectants approved for these purposes, after which it is rinsed with cold flowing water. A clean raw egg is laid out in a clean, labeled dish and transferred to the kitchen for further use. Storage of raw eggs in cassettes, boxes in production shops is not allowed.

Greens should be fresh, the texture of vegetables should be elastic; taste, color and smell must be appropriate for the products used.

Recipe

	Bookmark rate per 1 kg.	Form start Bookmark rate per kg., 0.1 net End of form
	unit of measurement	Gross weight	Net weight
Potato
fresh tomatoes
Lemon (for juice)
Pickles
Chicken egg
Mayonnaise 67%
Ground black pepper
Salt spicy
Output ready meal, G

Technological process

Boiled potatoes are peeled and cut into cubes, finely chopped pickles, salt, ground black pepper, lemon juice are added, seasoned with mayonnaise and mixed. The finished salad is sprinkled with grated hard-boiled eggs, decorated with slices of fresh tomatoes.

The salad is prepared as needed and sold in portioned dishes immediately after preparation.

According to the requirements of SanPin 2.3.6.1079-01, the temperature of the dish during serving should not exceed 14°C.

The allowable shelf life of the dish "Potato salad with pickles and tomatoes" before sale, according to SanPiN 2.3.6.1079-01, is 1 hour at a storage temperature not higher than 14°C.

The organoleptic characteristics of the dish "Potato salad with pickles and tomatoes" must meet the following requirements:

Microbiological indicators of the dish "Potato salad with pickles and tomatoes" must comply with the requirements of SanPiN 2.3.2.1078-01, index

The nutritional value

The nutritional value of the dish "Potato salad with pickles and tomatoes" per 100 g of the product and the yield of 1000 g is:

Rationale for calculating the nutritional and energy value of the dish

1. We get the nutrient content of 100 g of each product that is part of the dish

Ingredient			Carbohydrates
Potato
fresh tomatoes
Lemon (for juice)
Pickles
Chicken egg
Mayonnaise 67%
Ground black pepper
Salt spicy

2. Calculate the content of nutrients in the raw material set of the dish

Ingredient	Net weight)	Carbohydrates
Potato
fresh tomatoes
Lemon (for juice)
Pickles
Chicken egg
Mayonnaise 67%
Ground black pepper
Salt spicy

3. We calculate the balance of nutrients, taking into account their safety during heat treatment

Ingredient	Processing type	Carbohydrates

Potato
fresh tomatoes	No processing
Lemon (for juice)	No processing
Pickles	No processing
Chicken egg	hard boil
Mayonnaise 67%	No processing
Ground black pepper	No processing
Salt spicy	No processing

4. We calculate the balance of nutrients, taking into account the mass loss of products during heat treatment

Ingredient	Processing type	Carbohydrates

Potato
fresh tomatoes	No processing
Lemon (for juice)	No processing
Pickles	No processing
Chicken egg	hard boil
Mayonnaise 67%	No processing
Ground black pepper	No processing
Salt spicy	No processing

Based on the calculations, we calculate the food and energy value for the output of 1000 g and 100 g of the product according to the formula:

Calories = Protein*4 + Fat*9 + Carbohydrates*4+ Alcohol content*7

Responsible for the design of the TTC I.O. Surname

Head production I.O. Surname

Technical and technological map No. 2 " Liver Brizol "

Application area

This technical and technological map has been developed in accordance with GOST R 53105-2008 and applies to the signature dish "Brizol Liver", produced by the Park Inn Pribaltiyskaya hotel and sold in the service canteen.

Raw material requirements

Food raw materials, food products and semi-finished products used to prepare the "Liver Brizol" dish must comply with the requirements of current regulatory and technical documents, have accompanying documents confirming their safety and quality (certificate of conformity, sanitary and epidemiological conclusion, certificate of safety and quality, etc. .)

Processing of all products used must be carried out in strict accordance with established sanitary norms and rules.

During primary processing, frozen by-products are thawed in air at a temperature of 15-18°C.

After thawing, blood vessels are cut out from the liver and, after washing in cold water, the film is removed.

The processing of a raw egg used for cooking is carried out in a specially designated place in the following sequence: with a warm 1-2% solution of soda ash, a 0.5% solution of chloramine, or other detergents and disinfectants approved for these purposes, after which it is rinsed with cold flowing water. A clean raw egg is laid out in a clean, labeled dish and transferred to the kitchen for further use. Storage of raw eggs in cassettes, boxes in production shops is not allowed.

Recipe

Name of raw materials and products	Bookmark rate for 1 portion.	Form start Bookmark rate per serving, net End of form
	unit of measurement	Gross weight	Net weight
Beef liver s/m
Sunflower oil
Chicken egg
Wheat flour
Ground black pepper
Salt spicy
The output of the finished dish, g

Technological process

The prepared liver is cut into 1-2 pieces per serving, lightly beaten, sprinkled with salt and pepper, breaded in a mixture of flour and eggs, fried on both sides in a pan with sunflower oil, heated to 150-180 ° C, brought to readiness in a combi steamer.

Requirements for registration, implementation and storage

The dish is sold in portioned dishes immediately after preparation.

According to the requirements of SanPin 2.3.6.1079-01, the temperature of the dish during serving should not be lower than 65°C.

The allowable shelf life of the dish "Liver Brizol" before sale, according to SanPiN 2.3.6.1079-01, is 2-3 hours at a storage temperature of at least 65°C.

The shelf life of the dish "Liver Brizol" according to SanPiN 2.3.2.1324-03 is 36 hours at a storage temperature of +2°C to +6°C.

Quality and safety indicators

The organoleptic characteristics of the dish "Liver Brizol" must meet the following requirements:

Microbiological...

Similar Documents

Characteristics of the public catering enterprise "Premier". Determination of the number of dishes and drinks sold in the hall. Development of assortment minimum. Preparation of a menu plan and calculation of raw materials. Hall loading schedule. Creation of technological maps.

term paper, added 01/13/2014

Characteristics of the hot shop. Determination of the number of consumers, the number of dishes and drinks sold in the hall, the number of employees. Development of a menu plan. Drawing up a table of the implementation of dishes. Equipment selection. Certification of products and raw materials.

term paper, added 06/16/2014

a brief description of enterprises. Determination of the number of dishes and drinks sold in the hall. Development of the product range. Menu design, food and beverage sales. Calculation of the labor force. Organization of service at the enterprise.

term paper, added 01/10/2015

Characteristics of a public catering enterprise and the development of an assortment minimum. Creation of a menu for a fish diner. Technological scheme for preparing a dish: a list of raw materials, technological operations of preparation, release and serving of the finished dish.

term paper, added 11/05/2014

Characteristics of the public catering establishment and the contingent of those who eat. Determining the number of consumers and dishes. Fundamentals of compiling the settlement menu. Development of schemes of the technological process for the preparation of semi-finished products and finished products.

term paper, added 07/13/2014

Banquet, its organization. Preparation of menus, determination of the number of dishes. Assortment of banquet cold dishes. Sequence, design and presentation of dishes. Technology of preparation of banquet cold dishes. Product processing. Features of the cold shop.

term paper, added 11/06/2008

Studying the elements of the cafe menu: specialties, cold dishes, snacks, soups, second hot, sweet, flour dishes, drinks. Overview technological features cooking. Quality requirements, terms of storage and sale, execution and submission.

term paper, added 08/29/2012

Characteristics of the dining room of the educational institution. Organization of distribution of finished products and customer service. Determination of the number of dishes and drinks sold in the hall. Calculation of useful and total area of the workshop. Selection of equipment for the vegetable shop.

term paper, added 02/16/2011

Characteristics of a public catering enterprise. Organization of reception-buffet in honor of the Day of the Republic of Kazakhstan. Taking orders for buffet service. Preparation of menus and calculation of dishes, table setting. The recipe for cooking dishes of Kazakh cuisine.

term paper, added 04/22/2014

Organization and planning of activities of a public catering enterprise. Drawing up an assortment minimum and a planned menu. Calculation of the annual production program of turnover and gross income. Rationale for the use of new types of products.

PLAN.

Introduction.

Characteristics of the enterprise.

Organization of supply and warehousing of the restaurant.

Technological documentation for production.

Scientific organization labor.

Organization of production.

Description of the event.

Conclusion.

Bibliography.

Introduction.

Food is the basis of human life. How a person eats depends on his health, mood, and ability to work. Therefore, human nutrition is not only his personal, but also a public matter.

Catering establishments are equipped with mechanical, refrigeration and heating equipment with gas, electric and steam heating. In this regard, the technologist must know the equipment of catering establishments and other technical disciplines. Equally important for a technologist is knowledge of the economics of catering. It is impossible to achieve high labor productivity, improve the culture of service without knowing the basics of organizing public catering.

Development of public catering:

provides significant savings in social labor due to a more rational use of technology, raw materials, materials;

provides workers and employees with hot food during the working day, which increases their efficiency and maintains health;

makes it possible to organize a balanced rational diet in children's and educational institutions.

Improving the efficiency of public catering is based on the principles of intensification of production common to the entire national economy - achieving high results with lowest cost material and labor resources.

1. Characteristics of the enterprise.

In accordance with GOSTR 50761-95 “Catering services. General requirements” certain requirements are imposed on catering services. The catering service is the result of the activities of enterprises and individual entrepreneurs to meet the consumer's needs for food and leisure activities.

Restaurant "Arcadia" belongs to the restaurants of the "upper" class. The hall is designed for 150 seats. (restaurant plan appendix 1)

The building includes: a trading floor, a billiard room, a bar, industrial premises, administrative premises, warehouses, amenity premises for personnel, and technical ones.

The production facilities include; hot shop, cold shop, semi-finished product finishing shop, vegetable shop, kitchenware washing, tableware washing.

The office of the director, the accounting department, the office of the head of production are classified as administrative premises.

Amenity facilities include a locker room for staff, a shower room and toilet rooms.

Technical premises include ventilation, switchboard, heating unit.

The restaurant "Arcadia" has a light neon sign, at the entrance to the restaurant there is a foyer. The foyer includes: wardrobe, toilet rooms, security post.

The trading floor has a stage and a dance floor in front of it.

The interior of the hall is designed in blue-green tones. When decorating the hall were used modern materials as well as wood and fabrics. Superior furniture in accordance with the interior of the restaurant, the tables have a soft coating. Chairs are soft with armrests.

Exquisite and original decorative elements (lamps, draperies, paintings, etc.) are used to decorate the hall and premises for consumers.

Restaurant "Arcadia" offers everything that fans of billiards need:

First-class tournament level billiard tables;

Magnificent interior;

Quiet, calm atmosphere conducive to a good game;

A cozy bar with a wide range of spirits and delicious homemade food;

For regular customers discounts.

To create an optimal microclimate in the restaurant there is an air conditioning system.

Arcadia Restaurant is a public catering establishment that provides consumers with a wide range of complex dishes, mainly individual orders, as well as wine, vodka, tobacco and confectionery products. A high level of service is combined with the organization of recreation for visitors.

Leisure services include:

organization of musical service;

organization of concerts, programs, variety shows.

The Arcadia Restaurant organizes receptions, family celebrations, banquets, and themed parties.

Visitors are served by waiters, head waiters, bartenders, meals and drinks are prepared by highly qualified chefs. The attendants have uniforms and shoes of a single sample.

In the Arcadia Restaurant, visitors are provided with lunches (business lunch) and dinners.

The restaurant has a convenient road access and secure parking.

2. Organization of supply and warehousing of the restaurant.

In the Arcadia restaurant, a forwarder delivers products. To provide the enterprise with food products, it is necessary to solve the following tasks:

What to buy;

How much to buy;

From whom to buy;

Under what conditions to buy;

In addition, you need:

Enter into a contract;

Monitor the execution of the contract;

Arrange delivery;

Organize warehousing and storage.

These tasks are solved by the supply department of the restaurant. It works independently, performing its functions defined above. The company has a list of suppliers from which products are constantly purchased, as well as purchases are made in the markets and wholesale depots.

The compiled list of suppliers is analyzed on the basis of special criteria. Often they are limited by the price and quality of the supplied products, as well as the reliability of supplies.

Other criteria to consider when choosing a supplier include:

Remoteness of the supplier from the consumer;

Terms of execution of orders;

Organization of quality management at the supplier;

Financial position supplier, his creditworthiness, etc.

Delivery of products is carried out in a centralized and decentralized way.

Centralized delivery of goods to enterprises is carried out by the forces and means of suppliers. With centralized delivery, the enterprise is relieved of the need to have its own transport.

With decentralized delivery, the export of goods from suppliers is provided directly by the enterprise itself, using its own transport.

Transport plays an important role in the movement of goods.

Drivers of transport and the forwarder in the process of movement of goods must ensure:

Safety of cargo during transportation;

Timely delivery of cargo;

Compliance with the rules of loading and transportation of cargo;

Effective use Vehicle.

In the restaurant "Russian meal" for each vehicle intended for the transport of products, there is a sanitary passport issued by the institutions of the sanitary and epidemiological service.

Acceptance of goods in a catering enterprise is an important part of the technological process. Acceptance is carried out in two stages.

Products are received in quantity and quality. The first stage is preliminary. Acceptance of products by quantity is carried out according to waybills, invoices, by recalculating containers, weighing. If the goods arrived in good packaging, in addition to checking the gross weight, the company has the right to require opening the container and checking the net weight. The second stage is final acceptance. The net weight and the number of trade units are checked simultaneously with the opening of the container. The tare weight is checked simultaneously with the acceptance of the goods.

If a shortage is detected, a unilateral act is drawn up on the identified shortage, this product is stored separately, its safety is ensured and the supplier is called. After the final acceptance, an act is drawn up in 3 copies.

Simultaneously with the acceptance of goods by quantity, the goods are also accepted by quality.

Acceptance of goods by quality is carried out organoleptically (by appearance, color, smell, taste). At the same time, compliance with standards, TU is checked. Certificates or certificates of quality are attached to transport documents.

To ensure the uninterrupted operation of production facilities for the sale of products in a sufficient range, taking into account consumer demand, it is necessary inventory.

Non-perishable products (flour, sugar, cereals) - 8-10 days

Perishable products (meat, fish, poultry) - 2-5 days

Stocks of milk bread should not exceed a one-day sale.

3. Technological documentation for production.

The main stage of planning is the preparation of a menu plan. The menu plan is drawn up by the head of production on the eve of the planned day (no later than 15:00) and approved by the director of the enterprise.

To the main factors that must be considered when compiling the menu. These include: an approximate range of products recommended for public catering establishments, depending on the type and type of ration provided, the availability of raw materials and its seasonality.

By approving the menu plan, the director and production manager are responsible for ensuring that the dishes included in the menu are on sale throughout the entire trading day of the enterprise.

calling card a restaurant is called its menu, i.e. a list of snacks, dishes, drinks (with price and output) available for sale during the entire opening time.

The word menu comes from the French "menu" and means a schedule of dishes and drinks for breakfast, lunch and dinner, as well as a list of dishes for receptions and other types of service.

All dishes on the menu are listed in the sequence corresponding to the order of eating. The order of listing dishes should correspond to the assortment minimum established for each enterprise - a certain number of dishes and drinks that must be sold daily.

Reducing the number of items of dishes and snacks provided for by the assortment minimum is not allowed. On the contrary, the assortment can be expanded by including seasonal and signature dishes in the menu.

When compiling the menu, a variety of snacks, dishes should be achieved both in terms of types of raw materials (fish, vegetables, meat), and in terms of culinary processing (boiled, poached, fried, stewed, baked), as well as the correct combination of garnish with the main product.

When compiling the menu, the taste of food, the external design of dishes are taken into account. It should also be borne in mind that taste harmony should be achieved in dishes by combining various components with each other.

The next factor taken into account when compiling the menu is the seasonality of consumption. It is known that dishes rich in fats and proteins are in great demand in winter, and in summer the demand for cold dishes, vegetables and fresh fruits increases.

Many consumers visit cafes every day at lunchtime, so the menu should be diversified not only for a given day, but also for the days of the week.

When selecting side dishes and sauces for dishes, it is necessary to ensure that they correspond to the main product.

Meals and snacks included in the menu must be available throughout the day of work.

It should also be borne in mind that consumers with children often visit cafes during the daytime. Therefore, the menu should include dishes in the amount of half portions or special dishes for children.

In the menu, all snacks and dishes are arranged in the following order: from less spicy to more spicy, from poached to boiled, fried to stewed.

Menu types differ from each other in the selection of dishes offered and the price structure.

A la carte menu. This type of menu offers a choice in each type of dish, with each dish being priced separately. Dishes from such a menu, chosen by visitors, are prepared to order.

Table d'hôte menu. This type of menu offers a small selection of dishes and is priced by the total amount per person for the entire menu.

A typical example of such a menu is a "business breakfast" (business lunch) at reasonable prices, which includes three or four types of dishes. The visitor pays a set price for the entire lunch or breakfast.

Table d'hot menus are very popular in holidays, for example New Year.

A la part menu - guests make a reservation and are served at a certain period of time. It is used more often in resort hotels.

"Buffet" - this wide choose dishes with free access, this service method increases the throughput of the hall, speeds up the service process.

A cyclic menu is a group of menus for a certain period of time. This type of menu is mainly used in stationary institutions, such as hospitals, sanatoriums, etc.

The cyclic menu aims to diversify the range of dishes for consumers and service personnel, as well as to guarantee the nutritional value of a whole group of people in order to maintain health.

4. Scientific organization of labor.

The scientific organization of labor in public catering, as in other industries, must solve three main tasks: economic, psychophysiological and social.

The solution of the economic problem assumes the most full use equipment, materials, raw materials, provides an increase in the efficiency of production and labor.

The solution of the psychophysical problem involves the creation of favorable working conditions at the enterprise that contribute to the health of workers, reduce fatigue and increase working capacity.

The solution of the social task ensures the all-round development of a person, contributes to the transformation of labor into a vital necessity, brings up responsibility for the results of one's labor.

These tasks are interconnected and should be solved in a complex. Without solving the psychophysical problem and social problems, economic problems will not be solved.

NOT distinguishes the following main directions.

development and implementation of rational forms and division and cooperation of labor;

improving the organization and maintenance of workplaces;

introduction of advanced techniques and methods of work;

improvement of working conditions;

training and advanced training of personnel;

rationalization of work and rest regimes;

strengthening labor discipline;

improvement of labor regulation.

5. Organization of production.

The restaurant "Arcadia" has a variety of shops specializing in the types of processed raw materials and manufactured products: a shop for the refinement of semi-finished products, a vegetable shop, a hot shop, and a cold shop. Warehouse, container, sanitary facilities.

Shops are subdivided into: procurement (workshop for finalizing semi-finished products, vegetable); pre-cooking (hot, cold).

In each workshop, a technological line is organized - a production site equipped with necessary equipment for a specific technological process.

In the preparation shops of the restaurant, mechanical processing of meat, fish, poultry, vegetables is carried out and semi-finished products are produced to supply the hot shop of their enterprise with them.

In the Arcadia Restaurant, they mainly work on semi-finished products, therefore, the processing of meat, poultry, offal and fish is concentrated in one workshop (semi-finished products refinement workshop), as well as the processing of all vegetables.

Cold shop.

Cold shops are designed for preparing, portioning and decorating cold dishes and snacks, sweet dishes and cold soups. Products used for cooking are not subjected to secondary heat treatment before release, therefore, strict sanitary requirements must be observed in the workshop: products used for cooking must be stored in refrigerated cabinets or chambers at a temperature not exceeding 6-8 degrees; utensils and utensils must be marked and used for their intended purpose; In accordance with the technological process, workplaces for processing raw and boiled vegetables, gastronomic meat and fish products, portioning dishes, etc. should be clearly delineated; salads, vinaigrettes, sandwiches should be prepared only in batches and sold within one hour; observe the temperature regime of storage and distribution of cold dishes (10-14 gr.).

Hot shop.

The hot shop is the main shop of the enterprise, in which the technological process of cooking is completed: the heat treatment of products and semi-finished products, the cooking of broths, the preparation of soups, sauces, side dishes, second courses, and the heat treatment of products for cold and sweet dishes are carried out. The hot shop has a convenient connection with the blank shops, with storage facilities and a convenient relationship with the cold shop, distribution and sales area, washing kitchen utensils.

Hot shop dishes produced at the Arcadia restaurant comply with the requirements of state standards, industry standards, enterprise standards, collections of recipes for dishes and culinary products, and are produced according to technological instructions and maps, technical and technological maps in compliance with the Sanitary Rules for Public Catering Establishments.

The production program of the hot shop is compiled on the basis of the range of dishes sold through the trading floor.

The hot shop is equipped with modern equipment: thermal, refrigeration, mechanical, and non-mechanical: stoves, ovens, electric frying pans, electric fryers, refrigerated cabinets, production tables and racks.

Vegetable shop.

The vegetable shop has a convenient connection with the cold and hot shops, where the production of finished products is completed.

The technological process of processing vegetables consists of sorting, washing, cleaning, cleaning after mechanical cleaning, washing, cutting.

Equipment for a vegetable shop is selected according to equipment standards, depending on the type and capacity of the enterprise. The main equipment is production tables, tables for peeling potatoes, washing baths, vegetable undercarriers.

Workplaces are equipped with tools, inventory for performing certain operations.

In the vegetable shop, a line for processing potatoes and root crops and a line for processing fresh cabbage and other vegetables and herbs are distinguished. The equipment is installed in the course of the technological process

The work of the vegetable shop is organized by the head of production.

Semi-finished product refinement shop.

The Arcadia Restaurant has a shop for the refinement of semi-finished products, which the company receives from industrial and procurement enterprises in the form of meat in large pieces, fish of a special cut, chilled and frozen, carcasses of chickens and chickens.

Separate workplaces are organized in the workshop for revision semi-finished meat products, semi-finished products from poultry, fish.

From the equipment in the workshop for finalizing semi-finished products, a universal drive PM-1.1 is installed with a set of machines for loosening, chopping meat and performing other operations. In addition to mechanical equipment, refrigeration equipment, washing baths, production tables, mobile racks are installed in the workshop.

In the Arcadia Restaurant, according to the production program, large-sized semi-finished products are cut into portions, small-sized and chopped. The workplace is equipped with a production table, on which I lay a cutting board, set dial scales.

By-products are delivered to the enterprise in the form of raw materials and a separate place for their processing is provided in the workshop for the preparation of semi-finished products.

A separate workplace has also been organized for the processing of poultry coming from industry. The preparation of semi-finished products from poultry is carried out at the workplace, where washing baths and a production table are used.

Given the specific smell of fish products, the preparation of portioned semi-finished products is carried out on separate production tables. In addition to separate equipment, separate tools, containers, cutting boards marked for fish processing are distinguished.

Table grinders are used in the semi-finished products processing workshop.

In the workshop, cooks of 4 and 5 categories perform the work. For their work, cooks report to the head of production or the foreman.

Washing kitchen utensils.

Washing of kitchen utensils is designed for washing stove-top utensils (boilers, pans, baking sheets, etc.), kitchen and cutting equipment, tools.

The washing room should have a convenient connection with the production shops (cold, hot). In the washing room, underware for used dishes, racks for clean dishes and equipment, washing baths with three compartments - for soaking, washing and disinfecting are installed.

6. Description of the event.

Banquet buffet for 30 people.

Banquet buffets are usually held by organizations when it is necessary to receive a large number of people in the same area of the banquet hall in a limited time; each participant during the banquet has the opportunity to approach any guest for a conversation, independently take the snacks and drinks he likes; invitees can leave the banquet at any time. As a rule, a banquet-buffet is organized from 18:00 to 20:00 and lasts 1-1.5 hours.

No chairs are placed at this banquet. Guests eat and drink while standing at the tables or, having taken a snack, move away from the table. The menu includes cold and hot appetizers, dessert and hot drinks. Hot snacks should be portioned without bones and sauce, salads - in baskets, caviar - in rolls; gastronomic products are cut in such a way that they can be eaten without a knife.

Before receiving guests, the restaurant hall is decorated with fresh flowers. They are covered with flannel and covered with green banquet tablecloths, in harmony with the color of the walls. On all tables, the tablecloths are lowered to the same length at a distance of 1-2 cm from the floor to hide the legs of the table, and the corners of the tablecloths are taken in at a right angle.

Additional and auxiliary tables are set as banquet tables (with descent). The lights are dimmed, soft music plays. The decoration is fresh wildflowers in low vases.

At a banquet-buffet with waiter service for business negotiations, the number of waiters is taken at the rate of one waiter for 15 people. Therefore, to serve 30 guests, 2 waiters will be required to serve dishes and clean up used dishes.

The waiters in the hall, standing at the tables, pour drinks, lay out dishes, snacks. Due to the fact that not all guests can immediately come to the table, the main attention of the waiters should be given to guests standing aside or at additional tables, offering them drinks and snacks.

During the entire service, the waiters keep order on the table, take away used dishes, bottles, replenish serving items, empty or replace ashtrays in a timely manner.

For a banquet-buffet, we use standard restaurant tables 1250x800mm in the amount of 5 pcs. at the rate of 1 p / m for 6-8 people. Compiled in the form of the letter P. And also, in addition to the buffet tables, we use tables 500x500 in the amount of 4 pcs. installed against the walls and one utility table for stocks of tableware, cutlery, glasses, napkins.

Conclusion.

Successful work catering depends on many factors. Like every a complex system, night club begins with the intent of its creator and ends with control and its functioning. In my work, I considered, in my opinion, the most important factors influencing success in the restaurant business. These factors are:

Functions of management in the restaurant business. Organization management is based on general principles production management systems. The management functions reveal the content of management as a process, reflect the type of management activity, official duties assigned to a specific structural unit or employee, the appointment of a specific management body. The main functions of management are common to all production and economic systems, they apply to any object of management. They are needed to solve common tasks management and are typical for everything management decision.

The structure of the management system of a public catering enterprise. A properly designed management system structure for any public catering enterprise simplifies and frees the manager from a number of functions for which there are qualified specialists. The structure of the management system is fixed in the organizational charts of the management structure, staffing tables provisions on structural divisions, job descriptions.

Placement and selection of personnel. Recruitment is essential to the success of a restaurant. Further work will depend on how correctly the manager selects the staff. The manager must know exactly what type of candidates are needed for a stable labor collective able to achieve high end results. Recently, due to the increased demands of visitors, restaurants are trying to improve the quality of food preparation and service. Accordingly, the needs of restaurants in highly qualified personnel are increasing.

Functions of managers. In this work, I paid much attention to the study of the work of managers in the restaurant business. Based on my own experience and local practice, I would like to note that despite the large number of restaurants in Bishkek, there are very few restaurants where there are managers who comply with the requirements placed on them

The catering service is a service for the preparation, sale and organization of the consumption of dishes and products of complex manufacture of all major groups from various kinds raw materials, purchased goods and wine and vodka products, provided by qualified production and service personnel in conditions advanced level comfort combined with leisure activities.

Vegetable shop.

A vegetable shop is organized at an enterprise with a large and medium capacity.

The vegetable shop is located, as a rule, in that part of the enterprise where the vegetable chamber is located in order to transport raw materials, bypassing the common production corridors. The workshop must have a convenient connection with the cold and hot workshop.

The range and quantity of products depends on the production program of the enterprise. The equipment for the workshop is selected according to the equipment standards, depending on the capacity of the enterprise.

P lan vegetable shop.

1 - potato peeler

2 - podvarnik.

3 - washing bath

4 - cleaning table

potatoes and root vegetables

5 - mobile rack.

6 - vegetable cutting

7 - production table.

8 - cleaning table

onion.

P
hot shop lan.

1 - electric stove PESM-4Sh 2 - electric frying pan SESM-0.5 3 - electric frying cabinet 4 - deep fryer. FESM-20 5 - electric stove with 2 burners. 6 - insert for heating equipment 7 - electric food warmer MSESM-50. 8 - production table. 9 - universal drive PG-0.6 10 - table for installation of small-scale mechanization. 11 – cooled table SOESM-2. 12 - barbecue oven. 13 - mobile rack. 14 - food boiler KPE-100. 15 - KRNE-100B electric boiler. 16 - food boiler KPESM-60. 17 - mobile bath. 18 - refrigerating cabinet ShKh-0.4M. 19 - food warmer counter for first courses. 20 – electric distributing stand СРСМ 21 – distributing stand. 22 - a table with a built-in washing tub. 23 - sink.

Cold shop plan.

1- cold cabinet ШХ-0.8; 2- cold cabinet ШХ –0.6 3- production table. 4 - section-table with a refrigerated cabinet and a slide SOESM-3 5 - low-temperature counter SN-0.15. 6 - section-table with refrigerated cabinet SOESM-2; 7- front-moving rack. 8 - washing bath VM-2SM 9 - machine for cutting boiled vegetables 10 - manual oil divider

Plan of the workshop for the completion of semi-finished products.

A - Meat processing area C - Poultry processing area

B - fish processing area.

1 - bathtub with sides; 2 - cutting chair; 3 - production table; 4 - mobile rack; 5 - universal drive PM-1.1; 6 - meat grinder; 7 - scorch box; 8 - washing bath; 9 - refrigerator.

Attachment 1.

PLAN OF THE RESTAURANT "Arcadia"

1 - foyer. 2 - dressing room. 3 - security room. 4 - toilet rooms. 5 - bar, billiard room. 6 - hall. 7 - hot shop, 8 - semi-finished product refinement shop, 9 - washing, 10 - cold shop, 11 - vegetable shop, 12 - storage facilities, 13 - staff and technical premises, 14 - administration,

Bibliography.

Korshunov N.V. “Organization of service in a restaurant” M, higher school 1976.

Christopher Enerton-Thomas "Restaurant business" - M, "Rosconsult" 1999

Usov V.V. “Organization of service in a restaurant” - Moscow. “ high school” 1990

Anosova M.M., Kucher L.S. "Organization of production at catering establishments", 1985

Radchenko L.A. "Organization of production at catering establishments", 2000.

Collection of recipes for dishes and culinary dishes of the national cuisines of the peoples of Russia. 1992

H. Riedel, “Bars and restaurants. Service Technique. 2002

Ivannikova E.I., "Bar business", 2002

Hot shops are organized at enterprises that perform a full production cycle. The hot shop is the main shop of a public catering enterprise, in which the technological process of food preparation is completed: heat treatment of products and semi-finished products, cooking of broth, preparation of soups, sauces, side dishes, main courses, as well as heat treatment of products for cold and sweet dishes. In addition, the workshop prepares hot drinks and bakes flour confectionery products (patties, pies, kulebyaki, etc.) for clear broths. From the hot shop, ready-made dishes go directly to the dispensing rooms for sale to the consumer.

A hot shop serving several trading floors located on different floors should be located on the same floor as the trading floor with the largest number of seats. On all other floors there should be distribution rooms with a stove for frying portioned dishes and food warmers. The supply of these distributing finished products is ensured by means of lifts.

The hot shop should be located next to the cold shop, washing tableware and kitchen utensils, distribution, trading floor and have a convenient relationship with the harvesting shops, the greenery processing shop, and storage facilities. Their close location helps to reduce the time spent on moving products from one workshop to another and to the distribution line. Washing kitchen and tableware is placed next to the hot shop.

The production program of the workshop is determined by the menu plan.

Dishes made in a hot shop are distinguished by the following main features:

type of raw material used from potatoes, vegetables and mushrooms; from cereals, legumes and pasta; from eggs and cottage cheese; from fish and seafood; from meat and meat products; from poultry, game, rabbit, etc.;

cooking method - boiled, poached, stewed, fried, baked;

the nature of consumption soups, main courses, side dishes, drinks, etc.,

appointment- for dietary, school food, etc.;

consistency - liquid, semi-liquid, thick, puree, viscous, crumbly.

Dishes of the hot shop must comply with the requirements of state standards, standards of the industry and enterprises, collections of recipes for dishes and culinary products, specifications and be developed according to technological instructions and maps, technical and technological maps, subject to the sanitary rules of catering establishments.

The hot shop should be equipped with modern equipment - thermal, refrigeration, mechanical and non-mechanical: stoves, ovens, cooking pots, electric frying pans, electric fryers, refrigerated cabinets, as well as production tables and racks.

Depending on the type and power, it is planned to use mechanical equipment in the hot shop (P-II universal drive, mashed potato machine).

Equipment for the hot shop is selected according to the standards for equipping trade, technological and refrigeration equipment in accordance with the type and number of seats in the enterprise, its mode of operation, the maximum load of the trading floor during peak hours, as well as forms of service.

The production program of the hot shop is compiled on the basis of the range of dishes sold through the trading floor, the range of culinary products sold through buffets and retail chain enterprises (culinary shops, trays).

The temperature, according to the requirements of the labor organization, should not exceed 23 ° C, therefore; supply and exhaust ventilation should be more powerful (air velocity - 1-2 m / s); relative humidity - 60-70%. To reduce the effect of infrared rays emitted by heated frying surfaces, the stove area should be 45-50 times smaller than the floor area.

Hot shop workers to successfully deal with production program, must begin work no later than 2 hours before the opening of the trading floor.

The number of chefs in each department is determined by the ratio 1:2, i.e. in the soup department there are half as many chefs.

The hot shop is subdivided into two specialized departments - soup and sauce. Broths and first courses are prepared in soup, while second courses, side dishes, sauces, hot threads are prepared in sauce.

Organization of the work of the soup department of the hot shop

The technological process of preparing first courses in the soup department consists of two stages of preparing broths (bone, meat, fish, mushroom, etc.), vegetable, fruit decoctions and cooking soups (filling, dairy, sweet).

The duration of cooking bone and meat and bone broths is 5-6 hours, so they are prepared the day before, the rest of the broths (meat, chicken, fish) - at the beginning of the working day. It is advisable to prepare them concentrated and store in the refrigerator.

In a restaurant where broths are prepared in small quantities, 50 and 40 l stove-top boilers are used to cook them.

In high-capacity canteens, where the assortment of first courses is small (2-3 items), soups are prepared in large batches that require a lot of broth, so two technological lines are organized. First line designed for making broths. At the workplace of a cook preparing broths, stationary boilers are installed in a line - electric, gas or steam. More often used electric boilers KPE-100, KPE-160, KPE-250 with a capacity of 100, 160, 250 liters or KE-100, KE-160 with functional tanks. They put a bath for washing meat, poultry carcasses, bones. The meat is placed in a cassette with a perforated insert and lowered into the washing bath. In the same container, the meat is immersed in a non-tilting cauldron installed nearby. After preparing the broth, the meat container is unloaded from the boiler using a special TP-80K cart with a lifting platform.

At catering establishments, unified steam cooking boilers of the type KPP-100-1, KPP-160-1 and KPP-250-1 (rectangular) can be used. In addition, electric cooking boilers KPE-100, KPE-160, KPE-250 or a sectional modulated tilting boiler KPESM-60 are in operation.

Digestion kettles are also used for cooking cabbage for cabbage rolls, potatoes and carrots for salads, etc. in functional perforated containers.

Opposite stationary cooking boilers are installed second production line for the preparation of soups, including a line of thermal and non-mechanical equipment, the distance between which should be 1.5 m.

The line of thermal equipment includes: a mobile boiler KP-60 with an electric cooking device UEV-60, an electric frying pan SE-0.45-01, an electric stove PE-0.51-01, production tables of the SP-1200 type for auxiliary operations.

The stove is used for cooking first courses in small batches in stove-top boilers, stewing vegetables, etc. An electric frying pan is used for sautéing vegetables. Section inserts for heating equipment, used as additional elements in the lines of sectional modulated equipment, create additional convenience for the cook.

Preparation of passerovka (beetroot, vegetable, flour) in the soup department is carried out 2-3 hours before the start of the hot shop.

Lines of non-mechanical equipment (distance between lines 1.5 m) for making soups include sectional modulating tables and a mobile bath for washing side dishes for clear broths. At the workplace of the cook who prepares the first courses, the following are used: a table with a built-in bathtub, a table for small-scale mechanization, a table with a refrigerated slide and a cabinet for storing food supplies.

In restaurants where first courses are prepared in small batches in 50, 40, 30, and 20 l stove-top boilers, food warmers are installed in the hot shop, which ensures the preservation of temperature and taste of soups. The first courses should be sold at a temperature not lower than 75 ° C, the duration of the implementation of the first courses in mass preparation is no more than 2-3 hours.

For the preparation of puree soups, the products are rubbed and ground using a universal drive II- with interchangeable mechanisms, a UKM universal kitchen machine with interchangeable mechanisms.

Flour culinary products (patties, cheesecakes, pies) are prepared for transparent broths. For their production organize additional jobs. The dough is kneaded in plate boilers, cut on a wooden-coated production table using rolling pins, manual dough dividers, cutters.

Organization of the work of the sauce department of the hot shop

This compartment is designed for preparing second hot dishes, side dishes, sauces.

The main equipment of the sauce department are cookers, ovens, electric frying pans, deep fryers, as well as cooking pots, a universal drive. Barbecue ovens are installed in hot shops of specialized enterprises and restaurants. The enterprises use sausage cookers, egg cookers, coffee makers, etc. For the preparation of dietary dishes, a steamer is installed in the sauce department.

The jobs of chefs preparing second courses in canteens and restaurants differ from each other.

In the sauce department of canteens, three technological lines are provided, on which workplaces are organized for frying, boiling, stewing, poaching, baking; preparation of side dishes, sauces and hot drinks; preparation of culinary products (cheesecakes, cabbage rolls, vegetable cutlets, etc.). In large canteens, culinary products are made in the culinary workshop.

The first line includes ovens (ShZhESM-2K), stoves, electric frying pans SESM-0.2 (SESM-0.5), fryers.

In restaurants, food warmers are also installed in this line, designed for short-term storage of second courses in a hot state.

In the hot shop of the canteen at the manufacturing enterprise, a conveyor oven is used for continuous frying of cutlets, rump steaks, entrecote and other meat products.

In diet canteens for steaming meat, fish, vegetables in perforated containers, a steamer APE-0.23A is used.

The second line provides a workplace for preparing side dishes, sauces and hot drinks. The workplace is equipped with a production table with a washing bath SPM-1500 for sorting and washing cereals; a digester kettle KP-60 for cooking side dishes and sauces; an electric stove for cooking coffee, cocoa in stove-top boilers (and in restaurants - chocolate, oriental coffee, etc.). Rice or pasta in a perforated container is lowered into the boiling water of the boiler using a mobile cart with a lifting platform. The finished side dish is washed in the boiler and unloaded along with the container using the same trolley. Then they are transferred to a functional container, filled with oil.

In restaurants where complex side dishes are mainly prepared, stove-top dishes are used in small quantities. For portioning and decorating dishes, special food warmers are used, as well as production tables with refrigerated slides and cabinets.

For the preparation of sauces at the workplace, cooking kettles are used when it is necessary to prepare a large amount of sauces, or pans of various capacities - when preparing a small amount of sauces. For rubbing vegetables and straining broths, sieves of various shapes or strainers are used. The main sauces (red and white), as a rule, are prepared for the whole day, and derivative sauces for 2-3 hours of selling dishes on the trading floor.

For frying potatoes (fries, pie, etc.), deep fryers of the FESM-20, FE-20-01 type are used.

The third line, intended for the manufacture of culinary products, has several jobs, since the products are made not only for sale through a distribution center, but also through the branches of the enterprise. At workplaces, production tables are installed, on which scales, cutting boards, functional containers and knives for molding products are placed. To wipe cottage cheese, potatoes and other products, a universal machine with a replaceable drive is installed.

In the sauce department of the restaurant, jobs are organized mainly by type of heat treatment. For example, a workplace for frying and browning products and semi-finished products; the second - for cooking, stewing and poaching products; the third - for the preparation of side dishes and cereals.

At the workplace, cooks use cookers (PESM-4, TLM-0.51, PE-0.51Sh, PE-0.17, PESM-4SHB, APN, etc.), ovens (IZHSM- 2K), production tables and mobile racks. When cooking deep-fried dishes (burgers in Kiev, French fries, etc.), on an open fire (grilled sturgeon, grilled meat, grilled poultry, etc.), an electric grill (GE, GEN-10) is included in the heat line , deep fryer (FESM-20, FE-20, FE-20-0.1). Prepared semi-finished products in a grid are immersed in a deep fryer with heated fat, then the finished products, together with a grid or slotted spoon, are transferred to a colander installed on a saucepan to drain excess fat. A separate workplace is allocated for the preparation of shish kebabs. Shish kebabs are portioned on the production table, and fried in a shish kebab oven ShR-2, in which heat transfer occurs by radiation.

Workplaces for cooking, stewing, poaching and baking products are organized taking into account the performance of several operations by cooks at the same time. For this purpose, thermal equipment (stoves, ovens, electric frying pans) are grouped with the calculation of the convenience of the transition of cooks from one operation to another. Auxiliary operations are carried out on production tables installed parallel to the heating line. Thermal equipment can be installed not only in a line, but also in an island way.

Grill bars and fast food establishments use GE electric grills with infrared radiation to fry chicken and other products. Acceleration of the heat treatment of food can be achieved by using microwave devices. In microwave devices, semi-finished products are heated throughout the entire volume of the product due to the properties of electromagnetic waves to penetrate into the product to a considerable depth. In the apparatus, the time for frying beef culinary products is 3.2 minutes, pancakes - 1.5 minutes.

The work of the cooks of the sauce department begins with familiarization with the production program (menu plan), select technological maps, specify the amount of products needed for cooking. In the restaurant, fried and baked dishes are prepared only by order of visitors; labor-intensive dishes that require a lot of time to cook (stews, sauces) are prepared in small batches. At other enterprises in mass production, no matter how much product is prepared, it must be taken into account that fried main courses (cutlets, steaks, entrecote, etc.) must be sold within 1 hour; boiled, poached, stewed main dishes - 2 hours, vegetable side dishes - 2 hours, crumbly cereals, stewed cabbage - 6 hours, hot drinks - 2 hours. In exceptional cases, in accordance with the requirements of sanitary rules, forced storage of the remaining food, it must be cooled and store at a temperature of 2-6 ° C for no more than 18 hours. Before selling, chilled food is checked and tasted by the head of production, after which it is necessarily subjected to heat treatment (boiling, frying on a stove or in an oven). The term for the sale of food after this heat treatment should not exceed 1 hour. It is forbidden to mix food leftovers from the previous day with food prepared on the same day, but at an earlier date with newly prepared food.

It is forbidden to leave the next day in the sauce department of the hot shop: pancakes with meat and cottage cheese, minced meat, poultry, fish; sauces; omelets; mashed potatoes, boiled pasta.

Labour Organization. Since the work in the hot shop is very diverse, cooks of various qualifications must work there. The following ratio of cooks in the hot shop is recommended: VI category - 15-17%, V category - 25-27%, IV category - 32-34% and III category - 24-26%.

The production team of the hot shop also includes washers kitchen utensils, kitchen workers.

The cook of the VI category, as a rule, is a foreman or a senior cook and is responsible for organizing the technological process in the workshop, the quality and compliance with the output of dishes, monitors compliance with the cooking technology and culinary products, prepares portioned, specialty, banquet dishes.

A 5th class cook prepares and decorates dishes that require the most complex culinary processing. The cook of the IV category prepares the first and second courses of mass demand, sautés vegetables, tomato puree. A cook of the III category prepares food (cuts vegetables, cooks cereals, pasta, fries potatoes, products from air mass, etc.).

It might be useful to read: